The 2020 Harley Davidson Street Bob is a popular choice among motorcycle enthusiasts due to its classic styling and powerful performance. One of the critical aspects of motorcycle maintenance that riders often overlook is tire pressure. Proper tire pressure not only ensures optimal handling and safety but also enhances the overall riding experience. Understanding the recommended tire pressure for various trims and engines is essential for keeping your bike in top condition.
Maintaining the correct tire pressure can significantly affect your motorcycle’s performance and longevity. Under-inflated tires can lead to poor handling, increased tire wear, and even dangerous blowouts. Conversely, over-inflated tires can result in a harsh ride and reduced traction. Therefore, knowing the appropriate tire pressure for your 2020 Harley Davidson Street Bob is crucial for any rider.
2020 Harley Davidson Street Bob Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Street Bob 107 | 36 | 2.5 | 40 | 2.8 |
| Street Bob 114 | 36 | 2.5 | 40 | 2.8 |
| Street Bob Special | 36 | 2.5 | 40 | 2.8 |
Resetting the Tire Pressure Sensor on the 2020 Harley Davidson Street Bob
Understanding how to reset the tire pressure sensor is essential for maintaining your 2020 Harley Davidson Street Bob. The tire pressure monitoring system (TPMS) alerts you when tire pressure is low or if there is a malfunction. If the TPMS light is flashing, it indicates that the system needs attention. This guide will walk you through the steps to reset the tire pressure sensor and address any issues with the TPMS light.
Steps to Reset the Tire Pressure Sensor
- Ensure that all tires are inflated to the recommended pressure.
- Turn the ignition key to the “On” position without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering wheel or in the glove compartment.
- Press and hold the reset button until the TPMS light blinks three times and then stays on.
- Start the engine and let it run for a few minutes.
- Turn off the engine and restart it to check if the TPMS light is off.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a more serious issue. Below are common reasons for a flashing TPMS light:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may be significantly under-inflated. |
| Faulty Sensor | A malfunctioning tire pressure sensor may need replacement. |
| Battery Issue | The sensor battery may be dead, requiring replacement. |
| System Malfunction | The TPMS may have a system error that needs diagnostic tools. |
What to Do If the Light Remains On
If the TPMS light remains illuminated after following the reset procedure, consider these steps:
- Check tire pressures manually with a gauge.
- Inspect tires for visible damage or punctures.
- Consult the owner’s manual for specific troubleshooting steps.
- Take your motorcycle to a certified technician for a thorough inspection.
By addressing the tire pressure sensor and monitoring system promptly, you can ensure a safe and enjoyable riding experience on your Harley Davidson Street Bob.
Maintaining Proper Tire Pressure for Your Motorcycle
Proper tire pressure is crucial to the performance and safety of your motorcycle. For the 2020 Harley Davidson Street Bob, maintaining the correct tire pressure enhances handling, improves fuel efficiency, and extends tire life. Ignoring tire pressure can lead to a range of issues, including poor traction, uneven tire wear, and increased risk of blowouts. Understanding how to check tire pressure and the importance of regular monitoring can help you avoid these problems.
The Importance of Maintaining Proper Tire Pressure
Maintaining the correct tire pressure is essential for several reasons:
- Safety: Properly inflated tires provide better grip and handling, reducing the risk of accidents.
- Performance: Correct tire pressure ensures optimal performance, allowing for smoother rides and better acceleration.
- Fuel Efficiency: Proper inflation minimizes rolling resistance, leading to improved fuel economy.
- Tire Longevity: Maintaining recommended pressure helps prevent premature tire wear, saving you money on replacements.
How to Check Tire Pressure
Checking tire pressure is a straightforward process that should be done regularly, ideally before each ride. Here’s how to do it:
- Gather your tools: a reliable tire pressure gauge and an air compressor.
- Ensure the tires are cold, as tire pressure increases with heat from riding.
- Remove the valve cap from the tire you want to check.
- Press the tire pressure gauge onto the valve stem firmly to get a reading.
- Compare the reading to the recommended tire pressure found in your owner’s manual.
- If necessary, add or release air to achieve the correct pressure.
- Replace the valve cap securely after checking.
Useful Tips for Maintaining Tire Pressure
To keep your tires in optimal condition, consider the following tips:
- Check tire pressure at least once a month and before long rides.
- Invest in a quality tire pressure gauge for accurate readings.
- Monitor tire condition regularly for signs of wear or damage.
- Keep a portable air compressor handy for quick adjustments on the go.
- Be aware that temperature changes can affect tire pressure; check more frequently in extreme weather.
By prioritizing proper tire pressure maintenance, you can enhance your riding experience and ensure the longevity and safety of your 2020 Harley Davidson Street Bob.
0 Comments