The 2014 Harley-Davidson Street Glide is a popular touring motorcycle known for its comfort and performance. Proper tire pressure is crucial for ensuring optimal handling, safety, and tire longevity. Riders need to be aware of the specific tire pressure requirements for their model to maintain the best riding experience.
Maintaining the correct tire pressure not only enhances the motorcycle’s performance but also contributes to rider safety. Under-inflated or over-inflated tires can lead to poor handling, increased tire wear, and even tire failure. Below is the tire pressure table for different trims and engines of the 2014 Harley-Davidson Street Glide.
2014 Harley Davidson Street Glide Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Street Glide (Standard) | 36 | 2.5 | 40 | 2.8 |
| Street Glide Special | 36 | 2.5 | 40 | 2.8 |
| Street Glide with ABS | 36 | 2.5 | 40 | 2.8 |
Resetting the Tire Pressure Sensor on the 2014 Harley Davidson Street Glide
The Tire Pressure Monitoring System (TPMS) on the 2014 Harley-Davidson Street Glide is designed to alert the rider when tire pressure is outside the recommended range. If the TPMS light is flashing, it indicates a problem that needs to be addressed. Resetting the tire pressure sensor is essential for ensuring accurate readings and maintaining optimal performance.
Tire Pressure Monitoring System Light Flashing
When the TPMS light starts flashing, it often means that the system needs to be recalibrated or reset. This situation can occur after tire pressure adjustments or tire changes. Follow these steps to reset the tire pressure sensor:
- Ensure all tires are inflated to the recommended pressure.
- Turn the ignition key to the “ON” position without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering column or near the fuse box.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the engine and allow the bike to run for a few minutes to complete the reset process.
Tire Pressure Sensor Reset Table
| Step | Description |
|---|---|
| 1 | Check all tire pressures to ensure they are correct. |
| 2 | Turn the ignition to the “ON” position. |
| 3 | Find and press the TPMS reset button. |
| 4 | Observe the TPMS light for blinking confirmation. |
| 5 | Start the engine and let it run. |
Common Issues and Troubleshooting
If the TPMS light continues to flash after attempting to reset, consider the following troubleshooting tips:
- Check for any punctures or damage to the tires.
- Inspect the TPMS sensors for corrosion or battery issues.
- Ensure the tires are not over-inflated or under-inflated.
- Consult a professional if the issue persists.
Maintaining Proper Tire Pressure for Safety and Performance
Proper tire pressure is critical for the overall performance and safety of your motorcycle. For the 2014 Harley-Davidson Street Glide, maintaining the correct tire pressure helps ensure optimal handling, stability, and tire longevity. Riding on improperly inflated tires can lead to various issues, including decreased fuel efficiency, poor traction, and increased risk of tire blowouts.
Importance of Proper Tire Pressure
Maintaining the correct tire pressure offers several benefits:
- Improved Handling: Properly inflated tires enhance cornering stability and responsiveness, allowing for a smoother ride.
- Increased Safety: Correct tire pressure reduces the risk of tire blowouts and improves braking performance, essential for rider safety.
- Extended Tire Life: Maintaining the right pressure helps prevent uneven tire wear, extending the life of your tires.
- Better Fuel Efficiency: Properly inflated tires reduce rolling resistance, leading to better fuel economy.
How to Check Tire Pressure
Regularly checking your tire pressure is essential for maintaining optimal performance. Follow these steps to check the tire pressure on your Street Glide:
- Purchase a reliable tire pressure gauge. Digital gauges are often more accurate and easier to read.
- Ensure tires are cold. Tire pressure can increase with heat, so check when the bike has been stationary for at least three hours.
- Remove the valve stem cap from the tire you want to check.
- Press the tire pressure gauge onto the valve stem and take the reading.
- Compare the reading to the recommended tire pressure listed in your owner’s manual.
- If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air.
- Replace the valve stem cap securely after checking.
Useful Tips for Tire Maintenance
To ensure your tires remain in good condition, consider the following tips:
- Check Tire Pressure Monthly: Make it a habit to check your tire pressure at least once a month and before long rides.
- Inspect Tires for Damage: Regularly look for signs of wear, such as cracks, bulges, or foreign objects stuck in the tread.
- Rotate Tires: If applicable, rotate your tires according to the manufacturer’s recommendations to promote even wear.
- Store Properly: If you store your motorcycle for an extended period, elevate it to prevent flat spots on the tires.
By prioritizing proper tire pressure and maintenance, you can enhance your riding experience and ensure your safety on the road.
0 Comments