The Honda Pilot 2017 is a versatile and reliable SUV that is designed for families and adventure seekers alike. One of the critical aspects of vehicle maintenance is ensuring that your tires are properly inflated. Correct tire pressure not only enhances safety but also improves fuel efficiency and prolongs the lifespan of your tires.
Understanding the specific tire pressure requirements for different trims and engines is essential for optimal performance. Below is a detailed tire pressure table for the 2017 Honda Pilot, providing the recommended pressure in both PSI and BAR for various configurations.
Honda Pilot 2017 Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Honda Pilot LX | 35 | 2.41 | 35 | 2.41 |
| Honda Pilot EX | 35 | 2.41 | 35 | 2.41 |
| Honda Pilot EX-L | 35 | 2.41 | 35 | 2.41 |
| Honda Pilot Touring | 35 | 2.41 | 35 | 2.41 |
| Honda Pilot Elite | 35 | 2.41 | 35 | 2.41 |
Honda Pilot 2017 Tire Pressure Sensor Reset
If the tire pressure monitoring system (TPMS) light is flashing on your 2017 Honda Pilot, it indicates that there may be an issue with the tire pressure sensors or that the tire pressure needs to be checked. Resetting the tire pressure sensor is a straightforward process that can help turn off the warning light and ensure your vehicle is operating safely.
Steps to Reset Tire Pressure Sensor
- Check the Tire Pressure: Before resetting the sensor, ensure all tires are inflated to the recommended pressure listed in the owner’s manual or the tire pressure label.
- Turn on the Ignition: Insert the key into the ignition and turn it to the “ON” position without starting the engine.
- Locate the TPMS Reset Button: The reset button is usually located beneath the steering wheel or on the dashboard. Refer to the owner’s manual for the exact location.
- Press and Hold the Reset Button: Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the Engine: Turn off the ignition and then start the engine. The TPMS light should turn off after a few moments.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a malfunction within the tire pressure monitoring system. Here are some common reasons for a flashing light:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may be under-inflated, requiring immediate attention. |
| Faulty Sensor | A malfunctioning tire pressure sensor may need replacement. |
| Battery Issues | The sensor battery may be dead, especially in older models. |
| Temperature Change | Significant temperature changes can affect tire pressure, triggering the light. |
What to Do If the Light Remains On
If the TPMS light remains illuminated or continues to flash after attempting to reset, follow these steps:
- Inspect all tires for visible damage or punctures.
- Check the tire pressure again using a reliable pressure gauge.
- Visit a qualified mechanic or Honda dealership for a diagnostic check.
- Consider replacing faulty sensors if necessary.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. Under-inflated or over-inflated tires can lead to various issues, including decreased fuel efficiency, poor handling, and increased tire wear. Additionally, improper tire pressure can significantly affect braking distances and overall vehicle stability, especially in adverse weather conditions.
Benefits of Proper Tire Pressure
- Enhanced Fuel Efficiency: Correct tire pressure helps maximize fuel economy by reducing rolling resistance.
- Improved Safety: Properly inflated tires ensure better traction and handling, reducing the risk of accidents.
- Extended Tire Life: Maintaining the recommended pressure prevents uneven tire wear, prolonging the lifespan of your tires.
- Better Ride Comfort: Proper inflation contributes to a smoother ride, enhancing overall driving comfort.
How to Check Tire Pressure
Checking tire pressure is a simple process that can be done at home or at a gas station. Here’s how to do it:
- Gather Your Tools: You will need a reliable tire pressure gauge. Digital gauges are often easier to read than analog ones.
- Remove Valve Caps: Unscrew the valve caps from all four tires.
- Check Pressure: Press the gauge firmly onto the valve stem and read the measurement. Make sure to do this quickly to avoid air loss.
- Compare with Recommended Pressure: Refer to the owner’s manual or the tire pressure label on the driver’s side door jamb to find the recommended PSI.
- Adjust Accordingly: If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air.
- Replace Valve Caps: Once all tires are checked and adjusted, replace the valve caps securely.
Useful Tips for Maintaining Tire Pressure
- Check Regularly: Tire pressure should be checked at least once a month and before long trips.
- Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes; tires may lose pressure in colder weather.
- Use a Quality Gauge: Invest in a good-quality tire pressure gauge for accurate readings.
- Don’t Forget the Spare: Ensure that your spare tire is also properly inflated, as it can be a lifesaver in emergencies.
- Be Aware of Load Changes: If carrying heavy loads, check if the tire pressure needs adjustment based on the load requirements.
0 Comments