The 2017 Honda Fit is a versatile and efficient subcompact car that appeals to a wide range of drivers. One of the critical aspects of maintaining any vehicle’s performance and safety is ensuring that the tire pressure is kept at the optimal level. Proper tire pressure not only enhances fuel efficiency but also contributes to better handling and tire longevity.
Understanding the specific tire pressure requirements for different trims and engines of the Honda Fit is essential for owners. This information helps in maintaining the vehicle’s performance and safety standards. Below is a detailed table that outlines the recommended tire pressure for various trims of the 2017 Honda Fit.
Honda Fit 2017 Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Fit LX | 32 | 2.2 | 32 | 2.2 |
| Fit EX | 32 | 2.2 | 32 | 2.2 |
| Fit EX-L | 32 | 2.2 | 32 | 2.2 |
| Fit Sport | 32 | 2.2 | 32 | 2.2 |
Honda Fit 2017 Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2017 Honda Fit plays a crucial role in ensuring your tires are properly inflated. If the TPMS light is flashing or remains illuminated, it indicates a potential issue with tire pressure or the system itself. Resetting the tire pressure sensor is a straightforward process that can be done at home without the need for specialized tools.
Steps to Reset Tire Pressure Sensor
- Ensure all tires are properly inflated to the recommended PSI.
- Turn the ignition key to the “ON” position without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering wheel or in the glove compartment.
- Press and hold the reset button until the TPMS light blinks three times.
- Release the button and turn off the ignition.
- Start the engine to check if the TPMS light has turned off.
Tire Pressure Monitoring System Light Flashing
If the TPMS light is flashing, this indicates a malfunction in the system. Here’s what you should do:
- Check for any tire leaks or damage that could affect pressure.
- Inspect the tire pressure of all four tires, including the spare if equipped with a sensor.
- Look for any warning messages on the dashboard that may indicate a specific issue.
- If the light persists, consult the owner’s manual for troubleshooting steps.
- Consider visiting a certified Honda technician for a diagnostic check.
Common Causes of TPMS Light Activation
| Cause | Description |
|---|---|
| Low Tire Pressure | One or more tires are below the recommended pressure. |
| Temperature Changes | Significant temperature drops can cause tire pressure to decrease. |
| Faulty Sensor | A malfunctioning TPMS sensor may trigger the warning light. |
| Improper Installation | New tires or sensors not installed correctly can lead to issues. |
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the safety, performance, and longevity of your vehicle. Under-inflated tires can lead to increased tire wear, reduced fuel efficiency, and compromised handling. Conversely, over-inflated tires can cause a harsher ride and increase the risk of a blowout. Regularly checking and maintaining the correct tire pressure ensures optimal vehicle performance and safety.
Benefits of Proper Tire Pressure
- Improved Fuel Efficiency: Properly inflated tires reduce rolling resistance, helping your vehicle achieve better miles per gallon.
- Enhanced Safety: Correct tire pressure ensures better traction and handling, especially in adverse weather conditions.
- Longer Tire Life: Maintaining the right pressure prevents uneven tire wear, extending the lifespan of your tires.
- Better Performance: Proper inflation contributes to improved steering response and overall vehicle performance.
How to Check Tire Pressure
Checking tire pressure is a simple task that can be done at home with a tire pressure gauge. Here are the steps to follow:
- Ensure the tires are cold, as heat from driving can increase pressure readings.
- Remove the valve cap from the tire you want to check.
- Press the tire pressure gauge onto the valve stem until you hear a hissing sound, indicating a seal has formed.
- Read the pressure on the gauge. Compare it to the recommended PSI found on the driver’s side door jamb.
- If the pressure is low, add air until it reaches the recommended level. If it’s too high, release some air.
- Replace the valve cap securely and repeat for all tires.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain properly inflated, consider the following tips:
- Check Regularly: Aim to check your tire pressure at least once a month and before long trips.
- Use a Quality Gauge: Invest in a reliable tire pressure gauge for accurate readings.
- Monitor Temperature Changes: Be aware that temperature fluctuations can affect tire pressure; check pressure during extreme weather.
- Inspect for Damage: Regularly inspect tires for cuts, punctures, or other damage that may affect pressure.
- Consider Professional Checks: Have a professional check your tire pressure and alignment during routine maintenance.
0 Comments