Correct Honda Civic Tire Pressure 2017 Guide

The 2017 Honda Civic is a popular compact car known for its reliability, efficiency, and performance. One crucial aspect of maintaining this vehicle is ensuring that the tire pressure is within the recommended range. Proper tire pressure not only enhances fuel efficiency but also improves safety and handling. Neglecting tire pressure can lead to uneven tire wear, decreased traction, and increased risk of blowouts.

Understanding the recommended tire pressure for different trims and engines of the 2017 Honda Civic is essential for optimal performance. The following table provides detailed information about the appropriate tire pressure settings for various models. This information is vital for owners looking to maintain their vehicles in peak condition.

Honda Civic Tire Pressure 2017

Tire Pressure Table for Different Trim/Engine

Honda Civic Tire Pressure 2017: Resetting the Tire Pressure Sensor

When the tire pressure monitoring system (TPMS) light on your 2017 Honda Civic flashes, it indicates that there’s an issue with the tire pressure or the TPMS itself. This light can be triggered by under-inflated tires, over-inflated tires, or a malfunctioning sensor. To ensure your vehicle operates safely and efficiently, it’s essential to reset the tire pressure sensor after checking and adjusting the tire pressures.

Steps to Reset the Tire Pressure Sensor

1. Check the Tire Pressure:
   

   • Use a tire pressure gauge to measure the pressure in all four tires.
   • Adjust the pressure according to the recommended levels found in the owner’s manual or the sticker located on the driver’s side door jamb.

2. Turn on the Ignition:
   

   • Insert the key into the ignition and turn it to the “On” position without starting the engine.

3. Locate the TPMS Reset Button:
   

   • The TPMS reset button is usually located beneath the steering wheel or on the dashboard.
   • Refer to the owner’s manual for the exact location if necessary.

4. Press and Hold the TPMS Reset Button:
   

   • Press and hold the TPMS reset button until the TPMS light blinks three times, then release the button.

5. Start the Engine:
   

   • Start the engine and let it run for about 20 minutes to allow the system to recalibrate.

6. Check the TPMS Light:
   

   • If the light turns off, the sensor has been successfully reset.
   • If it remains on or continues to flash, further inspection may be needed.

Tire Pressure Monitoring System Light Flashing

If the TPMS light continues to flash even after resetting, it may indicate a malfunction in the system. Here are some common reasons for a flashing TPMS light:

If troubleshooting does not resolve the issue, consult a certified Honda technician for further diagnosis and repair.

Importance of Maintaining Proper Tire Pressure

Maintaining the correct tire pressure is crucial for the overall performance and safety of your vehicle. Under-inflated or over-inflated tires can lead to a range of issues, including poor handling, increased tire wear, reduced fuel efficiency, and compromised safety. Here are some key reasons why proper tire pressure matters:

Benefits of Proper Tire Pressure

• Improved Fuel Efficiency: Correctly inflated tires reduce rolling resistance, allowing your vehicle to use less fuel.


• Enhanced Safety: Proper tire pressure ensures optimal traction, reducing the risk of skidding or losing control, especially in adverse weather conditions.


• Longer Tire Life: Maintaining the right pressure helps prevent uneven tire wear, extending the lifespan of your tires.


• Better Handling: Tires that are inflated to the correct levels improve steering response and overall vehicle handling.

How to Check Tire Pressure

Regularly checking your tire pressure is essential for maintaining safety and performance. Follow these steps to effectively check your tire pressure:

1. Gather Necessary Tools: You will need a reliable tire pressure gauge and an air compressor if adjustments are needed.


2. Check Tire Pressure When Cold: Tire pressure should be checked when the tires are cold, preferably before driving or after the vehicle has been parked for several hours.


3. Remove Valve Stem Caps: Carefully remove the valve stem caps from each tire.


4. Use the Tire Pressure Gauge: Press the gauge onto the valve stem to get a reading. Make sure to press firmly but avoid using excessive force.


5. Record the Pressure: Note the pressure reading and compare it to the recommended levels found in your owner’s manual or on the driver’s side door jamb.


6. Adjust as Needed: If the pressure is too low, use an air compressor to inflate the tire to the recommended level. If it’s too high, release some air until it reaches the correct pressure.


7. Replace Valve Stem Caps: Once all tires are checked and adjusted, replace the valve stem caps securely.

Useful Tips for Maintaining Tire Pressure

To ensure your tires remain in optimal condition, consider the following tips:

• Check Tire Pressure Monthly: Make it a habit to check your tire pressure at least once a month and before long trips.


• Inspect Tires for Damage: Regularly inspect your tires for signs of wear, punctures, or other damage that could affect performance.


• Rotate Tires Regularly: Follow the manufacturer’s recommendations for tire rotation to promote even wear.


• Monitor Weather Changes: Be aware that temperature changes can affect tire pressure. Tires typically lose about 1 PSI for every 10°F drop in temperature.


• Use a Quality Tire Pressure Gauge: Invest in a good-quality tire pressure gauge for accurate readings.

By adhering to these practices, you can ensure that your 2017 Honda Civic operates efficiently and safely, maximizing its performance and longevity.