Correct Honda Accord 2015 Tire Pressure Maintenance

The 2015 Honda Accord is a popular midsize sedan known for its reliability, comfort, and fuel efficiency. One critical aspect of vehicle maintenance that often goes overlooked is tire pressure. Proper tire pressure is essential for optimal performance, safety, and fuel economy. Understanding the recommended tire pressure for different trims and engine types can help ensure that your Accord operates at its best.

Maintaining the correct tire pressure is not only important for safety but also contributes to the longevity of your tires. Under-inflated tires can lead to poor handling, increased tire wear, and reduced fuel efficiency. Conversely, over-inflated tires can cause a harsh ride and increased risk of tire blowouts. This guide provides detailed information on the recommended tire pressure for the 2015 Honda Accord based on its various trims and engine configurations.

Honda Accord 2015 Tire Pressure

Tire Pressure Table for Different Trim/Engine

Honda Accord 2015 Tire Pressure Sensor Reset

The tire pressure monitoring system (TPMS) in the 2015 Honda Accord is designed to alert you when tire pressure is low. However, after inflating your tires to the recommended levels, you may need to reset the TPMS light. This process ensures that the system accurately reflects the new tire pressures. A flashing TPMS light can indicate a malfunction or that the system needs to be reset.

Resetting the tire pressure sensor is a straightforward process. Follow the steps outlined below to ensure your TPMS is functioning correctly.

Steps to Reset Tire Pressure Sensor

1. Check Tire Pressure: Before resetting, make sure all tires are inflated to the recommended pressure.
2. Turn the Ignition On: Insert the key and turn the ignition to the “On” position without starting the engine.
3. Locate the TPMS Reset Button: This is usually located under the steering wheel or near the driver’s side door.
4. Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.
5. Start the Engine: Turn the ignition off and then start the engine to ensure the light has reset.

Tire Pressure Monitoring System Light Flashing

If the TPMS light continues to flash after following the reset procedure, it may indicate a problem with the system. Here are some common reasons for a flashing TPMS light:

What to Do If the Light Does Not Turn Off

If the TPMS light remains on or continues to flash, consider the following actions:

• Recheck Tire Pressures: Make sure all tires are properly inflated.


• Inspect for Damage: Look for any visible damage to the tires or sensors.


• Consult a Mechanic: If issues persist, take your vehicle to a professional for further inspection.

The Importance of Maintaining Proper Tire Pressure

Maintaining proper tire pressure is crucial for vehicle safety, performance, and efficiency. Under-inflated tires can lead to poor handling, increased tire wear, and decreased fuel economy. On the other hand, over-inflated tires can result in a harsh ride and a higher risk of blowouts. Regularly checking and maintaining the correct tire pressure is one of the simplest yet most effective ways to ensure your vehicle operates safely and efficiently.

Proper tire pressure contributes to better traction, enhanced braking, and improved fuel efficiency. When tires are inflated to the recommended levels, they provide the best contact with the road, which is vital for handling and stability. Additionally, maintaining the right pressure can extend the lifespan of your tires, saving you money in the long run.

How to Check Tire Pressure

Checking your tire pressure is a straightforward process that can be done at home or at a service station. Follow these steps to ensure accurate measurements:

1. Gather Your Tools: You will need a reliable tire pressure gauge. Digital gauges are often easier to read, but manual ones work just as well.
2. Check When Tires Are Cold: Tire pressure should be checked when the tires are cold, ideally before driving or at least three hours after driving.
3. Remove Valve Cap: Unscrew the valve cap from the tire you wish to check.
4. Press Gauge onto Valve: Firmly press the tire pressure gauge onto the valve stem until you get a reading.
5. Read the Pressure: Note the pressure displayed on the gauge and compare it to the recommended levels found in your owner’s manual or on the driver’s side door jamb.
6. Replace the Valve Cap: After checking, make sure to replace the valve cap to prevent dirt and debris from entering.

Useful Tips for Maintaining Tire Pressure

To ensure your tires remain at the optimal pressure, consider the following tips:

• Check Monthly: Make it a habit to check your tire pressure at least once a month and before long trips.


• Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes. For every 10°F drop in temperature, tire pressure can decrease by about 1 PSI.


• Inspect for Damage: Regularly check your tires for signs of wear, punctures, or bulges that could affect pressure.


• Use Nitrogen: Consider filling your tires with nitrogen instead of air. Nitrogen is less likely to escape through the tire walls, helping maintain pressure longer.


• Rotate Tires: Regularly rotating your tires can help ensure even wear and pressure distribution across all tires.

By actively maintaining proper tire pressure, you enhance your vehicle’s safety, performance, and overall efficiency. Regular checks and adherence to best practices can lead to a smoother, safer driving experience.