The Harley-Davidson Ultra Limited is a popular touring motorcycle known for its comfort and performance. One crucial aspect of maintaining this bike is ensuring the tire pressure is set correctly. Proper tire pressure not only enhances the riding experience but also contributes to safety and fuel efficiency. Riders should be aware of the specific tire pressure requirements for different trims and engine configurations to optimize their motorcycle’s performance.
Harley Davidson Ultra Limited Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Ultra Limited (2014 – Present) | 36 | 2.5 | 40 | 2.8 |
| Ultra Limited Low (2015 – Present) | 36 | 2.5 | 40 | 2.8 |
| Ultra Limited 114 (2020 – Present) | 36 | 2.5 | 40 | 2.8 |
| Ultra Limited 117 (2021 – Present) | 36 | 2.5 | 40 | 2.8 |
| Ultra Classic Electra Glide (2013) | 36 | 2.5 | 40 | 2.8 |
Harley Davidson Ultra Limited Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the Harley-Davidson Ultra Limited is designed to alert riders when tire pressure is outside the recommended range. If the TPMS light is flashing, it indicates a problem that requires immediate attention. Resetting the tire pressure sensor can help resolve this issue and ensure that the system functions correctly.
Steps to Reset Tire Pressure Sensor
- Check Tire Pressure
- Locate the TPMS Reset Button
- Turn On the Ignition
- Press and Hold the TPMS Reset Button
- Release the Button and Wait for the Light to Turn Off
Check Tire Pressure
Before resetting the TPMS, verify that all tires are inflated to the recommended pressure. Use a reliable tire pressure gauge and compare your readings to the values in the tire pressure table provided earlier.
Locate the TPMS Reset Button
The TPMS reset button is usually located beneath the steering column or near the dashboard. Consult your owner’s manual for the exact location.
Turn On the Ignition
Insert the key into the ignition and turn it to the “On” position without starting the engine. This action powers the vehicle’s electrical systems.
Press and Hold the TPMS Reset Button
Press and hold the TPMS reset button until the TPMS light blinks three times. This indicates that the system is in reset mode.
Release the Button and Wait for the Light to Turn Off
After releasing the button, the TPMS light should turn off after a few moments. If it remains on or continues to flash, there may be an underlying issue that requires further investigation.
Tire Pressure Monitoring System Light Flashing
If the TPMS light is flashing, it may indicate one of the following issues:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may be significantly under-inflated. |
| Faulty Sensor | The tire pressure sensor may be damaged or malfunctioning. |
| Battery Issues | The sensor battery may be dead, requiring replacement. |
| System Malfunction | The TPMS itself may be experiencing a fault. |
What to Do If the Light Continues to Flash
If the TPMS light persists after resetting, take the following actions:
- Inspect all tires for visible damage or punctures.
- Check the tire pressure again to ensure accuracy.
- Consult a Harley-Davidson dealership or qualified mechanic for diagnostics.
Maintaining the TPMS is essential for safe riding. Regular checks and timely resets can prevent unnecessary complications on the road.
The Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the performance, safety, and longevity of your Harley-Davidson Ultra Limited. Incorrect tire pressure can lead to various issues, including reduced handling, increased tire wear, and compromised safety. Under-inflated tires can overheat, increasing the risk of a blowout, while over-inflated tires can lead to a harsh ride and decreased traction. Regular monitoring and maintenance of tire pressure are essential for an optimal riding experience.
How to Check Tire Pressure
Checking tire pressure is a straightforward process that should be performed regularly, especially before long rides. Here’s how to do it:
- Gather Your Tools: You will need a reliable tire pressure gauge and, if necessary, an air compressor.
- Check Tire Temperature: Tire pressure should be checked when the tires are cold, ideally before riding or after the bike has been parked for several hours.
- Remove Valve Cap: Unscrew the valve cap from the tire you want to check.
- Insert Tire Pressure Gauge: Press the gauge onto the valve stem quickly and firmly to get an accurate reading.
- Read the Gauge: Note the PSI reading on the gauge and compare it to the recommended pressure listed in your owner’s manual or on the tire pressure label.
- Adjust Pressure if Necessary: If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air until it is within the acceptable range.
- Replace Valve Cap: After checking and adjusting, make sure to put the valve cap back on securely.
Useful Tips for Maintaining Proper Tire Pressure
To ensure your tires remain in optimal condition, consider the following tips:
- Check Regularly: Make it a habit to check tire pressure at least once a month and before any long trips.
- Use a Quality Gauge: Invest in a good-quality tire pressure gauge for accurate readings.
- Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes. Check the pressure more frequently during extreme weather conditions.
- Inspect for Damage: Regularly inspect tires for signs of wear, punctures, or damage that could affect pressure.
- Know Your Limits: Familiarize yourself with the recommended tire pressure for your specific model and adjust accordingly based on load and riding conditions.
- Stay Informed: Keep an eye on tire pressure monitoring system alerts and address any warnings promptly.
By following these guidelines, you can enhance your riding experience and ensure your Harley-Davidson Ultra Limited performs at its best. Proper tire maintenance is not just about extending tire life; it’s also about ensuring your safety on the road.
0 Comments