Harley-Davidson Street Glide is a popular touring motorcycle known for its comfort and performance. One of the key factors in ensuring the optimal riding experience is maintaining the proper tire pressure. Incorrect tire pressure can lead to poor handling, increased tire wear, and reduced fuel efficiency. Therefore, it is essential for riders to be aware of the recommended tire pressure for their specific model.
The recommended tire pressure varies depending on the trim and engine of the Harley-Davidson Street Glide. Below is a detailed table that outlines the appropriate tire pressure settings in both PSI and BAR for different trims and engines of the Street Glide.
Harley Davidson Street Glide Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Model Year | Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|---|
| 2023 | Street Glide Special | 36 | 2.5 | 40 | 2.8 |
| 2022 | Street Glide | 36 | 2.5 | 40 | 2.8 |
| 2021 | Street Glide | 36 | 2.5 | 40 | 2.8 |
| 2020 | Street Glide | 36 | 2.5 | 40 | 2.8 |
| 2019 | Street Glide | 36 | 2.5 | 40 | 2.8 |
| 2018 | Street Glide | 36 | 2.5 | 40 | 2.8 |
Harley Davidson Street Glide Tire Pressure Sensor Reset
When the tire pressure monitoring system (TPMS) light on your Harley-Davidson Street Glide starts flashing, it indicates that there is an issue with the tire pressure. This could mean that the tire pressure is too low, or it may require recalibration. Resetting the tire pressure sensor is a straightforward process that can help restore the functionality of the TPMS.
Steps to Reset the Tire Pressure Sensor
- Ensure that all tires are inflated to the recommended pressure as specified in the tire pressure table.
- Turn on the ignition without starting the engine.
- Locate the TPMS reset button, which is usually found beneath the steering column or on the dashboard.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release the button.
- Start the engine and let the motorcycle run for about 20 minutes to allow the system to recalibrate.
Tire Pressure Monitoring System Light Troubleshooting
If the TPMS light continues to flash after resetting, further troubleshooting may be necessary. Here are some common causes and solutions:
| Issue | Possible Cause | Solution |
|---|---|---|
| Flashing TPMS Light | Low Tire Pressure | Check and inflate tires to the recommended PSI. |
| Flashing TPMS Light | Sensor Malfunction | Inspect the sensors for damage; replace if necessary. |
| Flashing TPMS Light | Battery Issues | Check the battery level of the tire pressure sensors; replace if low. |
Additional Tips
- Regularly check tire pressure to avoid TPMS issues.
- Keep the TPMS sensors clean and free from debris.
- Consult the owner’s manual for specific instructions related to your model.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your Harley-Davidson Street Glide. Incorrect tire pressure can lead to various issues, including reduced handling, increased tire wear, and compromised fuel efficiency. Riding on under-inflated tires can cause them to overheat, increasing the risk of a blowout. Conversely, over-inflated tires can result in a harsh ride and decreased traction, especially on wet surfaces.
Proper tire pressure also plays a significant role in your motorcycle’s handling characteristics. When the tires are inflated to the correct PSI, you can expect optimal grip and stability, which is essential for a safe riding experience. Regularly checking and maintaining tire pressure is a simple yet effective way to enhance your motorcycle’s performance and prolong the life of your tires.
How to Check Tire Pressure
Checking the tire pressure on your Harley-Davidson Street Glide is a straightforward process. Here are the steps to follow:
- Gather necessary tools: You will need a reliable tire pressure gauge.
- Ensure the tires are cold: Check the pressure when the tires are cold, ideally before riding.
- Remove the valve cap: Unscrew the valve cap from the tire you want to check.
- Press the gauge onto the valve stem: Apply the tire pressure gauge firmly onto the valve stem to get a reading.
- Read the gauge: Note the PSI reading on the gauge. Compare this with the recommended tire pressure from the manufacturer.
- Adjust if necessary: If the pressure is too low, inflate the tire to the recommended PSI. If it’s too high, release some air.
- Replace the valve cap: Once done, screw the valve cap back on securely.
Useful Tips for Maintaining Tire Pressure
To ensure your tire pressure remains at optimal levels, consider the following tips:
- Check tire pressure regularly: Make it a habit to check your tire pressure at least once a month and before long rides.
- Invest in a quality gauge: A good tire pressure gauge will provide accurate readings and help you maintain proper inflation.
- Monitor temperature changes: Tire pressure can fluctuate with temperature changes, so check your tires more frequently during seasonal transitions.
- Be aware of load: Carrying extra weight can affect tire pressure. Adjust accordingly based on your load.
- Inspect tires for damage: Regularly check for cuts, punctures, or wear that could affect tire performance.
By prioritizing tire pressure maintenance, you enhance not only your riding experience but also your safety on the road.
0 Comments