The Harley Davidson Street 750 is a popular choice among motorcycle enthusiasts, known for its sleek design and powerful performance. Proper maintenance is essential for ensuring the bike runs smoothly and safely. One crucial aspect of maintenance is maintaining the correct tire pressure, which can greatly impact handling, fuel efficiency, and overall riding experience.
Understanding the recommended tire pressure for different trims and engine configurations of the Street 750 can help riders optimize their performance. Below is a comprehensive table detailing the appropriate tire pressure specifications for various trims and engine types, measured in both PSI and BAR.
Harley Davidson Street 750 Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Street 750 Standard | 36 | 2.5 | 40 | 2.8 |
| Street 750 Special | 36 | 2.5 | 40 | 2.8 |
| Street 750 with ABS | 36 | 2.5 | 40 | 2.8 |
| Street 750 Custom | 36 | 2.5 | 40 | 2.8 |
Harley Davidson Street 750 Tire Pressure Sensor Reset
When the tire pressure monitoring system (TPMS) light on your Harley Davidson Street 750 starts flashing, it indicates a potential issue with the tire pressure sensors. This could be due to low tire pressure or a malfunction in the system itself. Resetting the tire pressure sensor is a straightforward process that can help you regain control over your bike’s performance and safety.
Steps to Reset the Tire Pressure Sensor
- Ensure that all tires are inflated to the recommended pressure.
- Turn the ignition key to the “ON” position without starting the engine.
- Press and hold the TPMS reset button, typically located under the dashboard or near the fuse box, for a few seconds.
- Release the button and wait for the TPMS light to blink and turn off.
- Start the engine and check if the TPMS light remains off.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after attempting to reset, it may indicate a more serious issue. Below are common reasons for a flashing TPMS light:
| Issue | Description | Recommended Action |
|---|---|---|
| Low Tire Pressure | One or more tires are below the recommended pressure. | Check and inflate tires to the correct PSI. |
| Faulty Sensor | A sensor may be malfunctioning or damaged. | Inspect sensors and replace if necessary. |
| Battery Issues | The battery in the tire pressure sensor may be dead. | Replace the sensor battery or the entire sensor. |
| System Malfunction | The TPMS may have a software or hardware issue. | Consult a professional mechanic for diagnostics. |
When to Seek Professional Help
If you’ve followed the reset procedure and the TPMS light remains on or continues to flash, it’s advisable to consult a professional. Ignoring the warning lights can lead to unsafe riding conditions. Always prioritize safety by ensuring your tire pressure monitoring system is functioning correctly.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the performance and safety of your Harley Davidson Street 750. Incorrect tire pressure can lead to various issues, including poor handling, reduced fuel efficiency, and increased tire wear. Riding on under-inflated or over-inflated tires can compromise your motorcycle’s stability, making it more difficult to control, especially during sharp turns or emergency maneuvers.
Benefits of Proper Tire Pressure
- Improved Handling: Correct tire pressure enhances grip and stability, allowing for better cornering and overall control.
- Increased Fuel Efficiency: Properly inflated tires reduce rolling resistance, leading to better fuel economy.
- Extended Tire Life: Maintaining the right pressure helps prevent uneven wear, extending the lifespan of your tires.
- Enhanced Safety: Proper tire pressure reduces the risk of blowouts and improves braking performance.
How to Check Tire Pressure
Regularly checking your tire pressure is essential for safe riding. Here’s how to do it effectively:
- Gather Tools: You will need a reliable tire pressure gauge and an air compressor.
- Check When Cold: Measure tire pressure when the tires are cold, ideally before riding or after sitting for a few hours.
- Remove Valve Cap: Unscrew the valve cap from the tire you want to check.
- Press Gauge: Firmly press the tire pressure gauge onto the valve stem to get a reading.
- Read Pressure: Note the PSI reading on the gauge. Compare it with the recommended tire pressure for your bike.
- Adjust as Needed: If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air.
- Replace Valve Cap: Always remember to put the valve cap back on after checking.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain in optimal condition, consider the following tips:
- Check Regularly: Make it a habit to check your tire pressure at least once a month.
- Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes. Check more frequently during seasonal transitions.
- Use Quality Gauges: Invest in a good quality tire pressure gauge for accurate readings.
- Inspect for Damage: Regularly inspect tires for cuts, punctures, or other damage that may affect pressure.
- Stay Informed: Familiarize yourself with the recommended tire pressure for your specific model and trim.
By prioritizing proper tire pressure maintenance, you can enhance your riding experience, improve safety, and ensure your Harley Davidson Street 750 performs at its best.
0 Comments