Proper tire pressure is essential for the performance and safety of your Harley Davidson Dyna Super Glide. Maintaining the correct pressure ensures optimal handling, stability, and fuel efficiency. Under-inflated or over-inflated tires can lead to increased wear, reduced traction, and potential blowouts, which can jeopardize your ride.
Understanding the specific tire pressure requirements for different trims and engines of the Dyna Super Glide is crucial. This knowledge allows riders to adjust their tire pressure according to the manufacturer’s specifications, ensuring a safe and enjoyable riding experience.
Harley Davidson Dyna Super Glide Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Dyna Super Glide (Standard) | 36 | 2.5 | 40 | 2.8 |
| Dyna Super Glide Custom | 36 | 2.5 | 40 | 2.8 |
| Dyna Super Glide Special | 36 | 2.5 | 40 | 2.8 |
| Dyna Street Bob | 36 | 2.5 | 40 | 2.8 |
| Dyna Low Rider | 36 | 2.5 | 40 | 2.8 |
Harley Davidson Dyna Super Glide Tire Pressure Sensor Reset
When the tire pressure monitoring system (TPMS) light on your Harley Davidson Dyna Super Glide starts flashing, it indicates that there is an issue with the tire pressure sensors. This can happen for various reasons, including low tire pressure, sensor malfunction, or after changing tires. Resetting the tire pressure sensor is essential to ensure accurate readings and maintain safety while riding.
Steps to Reset the Tire Pressure Sensor
- Check Tire Pressure: Before resetting, ensure all tires are inflated to the recommended pressure levels.
- Turn on the Ignition: Insert the key and turn the ignition to the “On” position without starting the engine.
- Locate the TPMS Reset Button: This button is usually found under the steering column or in the glove compartment.
- Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times and then turns off.
- Start the Engine: Turn on the engine and let it run for a few minutes. The TPMS light should remain off.
Common Issues with Tire Pressure Monitoring System
| Issue | Possible Causes | Recommended Action |
|---|---|---|
| TPMS Light Flashing | Low tire pressure or sensor malfunction | Check and inflate tires; reset sensor |
| TPMS Light On | One or more tires are under-inflated | Inflate tires to recommended pressure |
| TPMS Light Blinking | Sensor battery low or malfunctioning | Replace sensor battery or sensor |
Tips for Maintaining Tire Pressure Monitoring System
- Regularly check tire pressures, especially before long rides.
- Replace TPMS sensors as recommended by the manufacturer.
- Ensure proper tire maintenance and inspection.
- Keep an eye on the TPMS light for any irregularities.
Understanding the Importance of Proper Tire Pressure
Maintaining proper tire pressure is crucial for the performance and safety of your motorcycle. Correct tire pressure ensures optimal contact between the tires and the road, which significantly affects handling, stability, and braking. Under-inflated tires can lead to increased tire wear, reduced fuel efficiency, and a higher risk of blowouts. Conversely, over-inflated tires may result in a harsh ride and decreased traction, especially in wet conditions.
Regularly checking and maintaining the correct tire pressure can enhance your riding experience and prolong the lifespan of your tires. It also plays a vital role in your overall safety on the road, making it an essential aspect of motorcycle maintenance.
How to Check Tire Pressure
Checking the tire pressure on your Harley Davidson Dyna Super Glide is a straightforward process. Follow these steps for accurate results:
- Gather Your Tools: You will need a reliable tire pressure gauge and, if necessary, an air compressor.
- Check Tire Temperature: For the most accurate reading, check the tire pressure when the tires are cold, ideally before riding.
- Remove Valve Cap: Unscrew the valve cap from the tire you want to check.
- Press Gauge onto Valve: Firmly press the tire pressure gauge onto the valve stem. Ensure a good seal to avoid air leakage.
- Read the Pressure: Note the reading on the gauge. Compare it to the recommended pressure listed in your owner’s manual.
- Add Air if Needed: If the pressure is low, use an air compressor to inflate the tire to the recommended PSI.
- Replace Valve Cap: After checking, ensure to screw the valve cap back on securely.
Useful Tips for Maintaining Proper Tire Pressure
- Check Tire Pressure Regularly: Aim to check your tire pressure at least once a month and before long trips.
- Know the Recommended Pressure: Familiarize yourself with the ideal tire pressure for your specific Dyna Super Glide model.
- Inspect Tires for Damage: Regularly examine your tires for cuts, punctures, or other signs of wear that could affect pressure.
- Use a Quality Gauge: Invest in a good-quality tire pressure gauge for accurate readings.
- Monitor Weather Conditions: Changes in temperature can affect tire pressure. Check more frequently during extreme weather changes.
- Be Cautious of Overloading: Avoid exceeding the maximum load capacity of your motorcycle, as this can lead to tire pressure issues.
By prioritizing the maintenance of proper tire pressure, you enhance your motorcycle’s performance and ensure a safer ride. Regular checks and adjustments are simple yet effective ways to prolong the life of your tires and improve your overall riding experience.
0 Comments