Harley-Davidson is a name synonymous with freedom and the open road. Among its diverse lineup, the Breakout model stands out for its striking design and powerful performance. However, to fully enjoy the ride, maintaining proper tire pressure is crucial. This not only ensures safety but also enhances the motorcycle’s handling and fuel efficiency.
Harley Davidson Breakout Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Breakout 107 | 36 | 2.5 | 40 | 2.8 |
| Breakout 114 | 36 | 2.5 | 40 | 2.8 |
| Breakout 117 | 36 | 2.5 | 40 | 2.8 |
Harley Davidson Breakout Tire Pressure Sensor Reset
When the tire pressure monitoring system (TPMS) light starts flashing on your Harley-Davidson Breakout, it signals that the tire pressure sensor needs attention. Ignoring this warning can lead to unsafe riding conditions. Resetting the tire pressure sensor is a straightforward process that ensures your motorcycle operates efficiently.
Steps to Reset Tire Pressure Sensor
- Ensure your tires are inflated to the recommended pressure.
- Turn the ignition key to the “On” position without starting the engine.
- Locate the TPMS reset button, typically found beneath the steering column.
- Press and hold the TPMS reset button until the TPMS light blinks three times.
- Release the button and start the engine.
- Drive your motorcycle for a short distance to allow the system to recalibrate.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, there may be an underlying issue. Here are common reasons for a persistent TPMS light:
| Issue | Description |
|---|---|
| Low Tire Pressure | Check all tires for proper inflation. |
| Faulty Sensor | The tire pressure sensor may need replacement. |
| Battery Issues | The sensor’s battery may be dead; sensors typically last 5-10 years. |
Additional Tips
- Regularly check tire pressure, especially before long rides.
- Inspect for any visible damage to the tires or sensors.
- Consult your owner’s manual for specific instructions related to your model.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the performance and safety of your Harley-Davidson Breakout. Incorrect tire pressure can lead to various issues, including poor handling, decreased fuel efficiency, and increased tire wear. Overinflated tires can result in a harsh ride and reduced traction, while underinflated tires can cause overheating and blowouts. Regularly checking and adjusting tire pressure ensures optimal performance and safety on the road.
How to Check Tire Pressure
Checking tire pressure is a simple process that can be done at home or at a gas station. Here’s how:
- Gather your tools: You will need a reliable tire pressure gauge.
- Ensure the tires are cold: Check tire pressure before riding or after the motorcycle has been stationary for a few hours.
- Remove the valve cap: Unscrew the cap from the tire valve.
- Press the gauge onto the valve: Firmly press the tire pressure gauge onto the valve stem to get a reading.
- Read the pressure: Note the PSI reading on the gauge and compare it to the manufacturer’s recommended tire pressure.
- Adjust as necessary: If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air.
- Replace the valve cap: After checking and adjusting, screw the valve cap back on securely.
Useful Tips for Tire Pressure Maintenance
To ensure your Harley-Davidson Breakout remains in peak condition, consider the following tips:
- Check tire pressure at least once a month and before long trips.
- Always refer to the owner’s manual for the recommended tire pressure for your specific model.
- Invest in a quality tire pressure gauge for accurate readings.
- Inspect your tires regularly for any signs of damage, such as cracks or bulges.
- Rotate your tires periodically to promote even wear.
- Be mindful of temperature changes, as tire pressure can fluctuate with temperature. A drop in temperature can lower tire pressure, while warmer conditions can raise it.
By keeping an eye on your tire pressure and following these guidelines, you can enhance the longevity of your tires and enjoy a safer, more enjoyable ride.
0 Comments