Correct BMW R1100RT Tire Pressure Maintenance Guide

The BMW R1100RT is a renowned touring motorcycle, known for its comfort and performance. One of the crucial aspects of maintaining this bike is ensuring the tire pressure is at the correct level. Proper tire pressure not only affects handling and safety but also impacts fuel efficiency and tire longevity. Riders must be diligent in checking and adjusting tire pressure regularly to ensure optimal performance.

BMW R1100RT Tire Pressure

Front Tire Pressure

Rear Tire Pressure

Resetting the BMW R1100RT Tire Pressure Sensor

The tire pressure monitoring system (TPMS) is an essential feature in the BMW R1100RT, designed to alert riders when tire pressure is outside the recommended range. If the TPMS light is flashing, it indicates a potential issue that requires attention. Resetting the tire pressure sensor is a straightforward process, but it’s important to follow the correct steps to ensure proper functionality.

Steps to Reset Tire Pressure Sensor

1. Check Tire Pressure:

• Ensure that all tires are inflated to the recommended pressure.
• Use a reliable pressure gauge for accuracy.

2. Turn on the Ignition:

• Do not start the engine; just turn the key to the “ON” position.

3. Locate the Reset Button:

• Find the TPMS reset button, usually located near the steering column or under the dashboard.

4. Press and Hold the Reset Button:

• Hold the button until the TPMS light blinks three times.
• Release the button after the third blink.

5. Turn Off the Ignition:

• Turn the key to the “OFF” position and remove it.

6. Start the Engine:

• Start the motorcycle and check if the TPMS light is off.

Common Issues with TPMS Light

The Importance of Maintaining Proper Tire Pressure

Maintaining proper tire pressure is crucial for the safety, performance, and longevity of your BMW R1100RT. Incorrect tire pressure can lead to various problems, including poor handling, reduced fuel efficiency, and increased tire wear. Overinflated tires may cause a harsh ride and decrease traction, while underinflated tires can lead to overheating and blowouts. Regularly checking and adjusting tire pressure ensures that you get the best performance from your motorcycle.

How to Check Tire Pressure

Checking tire pressure is a simple process that requires a few tools and a little time. Follow these steps to ensure your tires are properly inflated:

1. Gather Your Tools:

• Tire pressure gauge (digital or analog)
• Air compressor or manual pump

2. Check When Tires Are Cold:

• For the most accurate reading, check tire pressure when the tires are cold, ideally before riding or after sitting for a few hours.

3. Remove Valve Cap:

• Unscrew the valve cap from the tire you are checking.

4. Press Gauge onto Valve:

• Firmly press the tire pressure gauge onto the valve stem to get a reading.

5. Read the Pressure:

• Note the pressure reading and compare it to the recommended PSI listed in your owner’s manual.

6. Adjust as Necessary:

• If the pressure is too low, use an air compressor to inflate the tire. If it’s too high, release some air until it reaches the recommended level.

7. Replace Valve Cap:

• Once you’ve checked and adjusted the pressure, replace the valve cap securely.

Useful Tips for Maintaining Tire Pressure

• Check Regularly:




• Make it a habit to check tire pressure at least once a month and before long trips.





• Invest in a Quality Gauge:




• A reliable tire pressure gauge ensures accurate readings.





• Monitor Temperature Changes:




• Tire pressure can change with temperature fluctuations, so adjust accordingly.





• Inspect Tires for Damage:




• While checking tire pressure, also inspect for any visible damage or wear.





• Don’t Ignore Warning Lights:




• If the TPMS light activates, check your tire pressure immediately.