The 2020 Nissan Pathfinder is a versatile SUV designed for both comfort and performance. One crucial aspect of maintaining this vehicle is ensuring the tire pressure is at the recommended levels. Proper tire pressure not only enhances fuel efficiency but also contributes to the overall safety and handling of the vehicle.

Maintaining the correct tire pressure is essential for optimal driving conditions. Each trim and engine variant of the 2020 Pathfinder has specific tire pressure requirements, which can vary based on load and driving conditions. Below are the recommended tire pressure specifications for different trims and engines of the 2020 Nissan Pathfinder.

2020 Nissan Pathfinder Tire Pressure

Tire Pressure Table for Different Trim/Engine

Trim/Engine Front Tire Pressure (PSI) Front Tire Pressure (BAR) Rear Tire Pressure (PSI) Rear Tire Pressure (BAR)
S 33 2.3 33 2.3
SV 33 2.3 33 2.3
SL 33 2.3 33 2.3
Platinum 33 2.3 33 2.3

2020 Nissan Pathfinder Tire Pressure Sensor Reset

The tire pressure monitoring system (TPMS) in the 2020 Nissan Pathfinder is designed to alert drivers when tire pressure is too low. However, after inflating tires or changing a tire, you may notice that the TPMS light continues to flash. This indicates that the system needs to be reset to accurately monitor the tire pressures.

Resetting the tire pressure sensor is a straightforward process. Follow the steps outlined below to ensure your TPMS functions properly.

Steps to Reset Tire Pressure Sensor


  1. Check Tire Pressure: Ensure all tires are inflated to the recommended PSI as per the specifications.

  2. Turn on the Ignition: Insert the key into the ignition and turn it to the “On” position without starting the engine.

  3. Locate the TPMS Reset Button: This button is typically located beneath the steering wheel or in the glove compartment.

  4. Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.

  5. Start the Engine: Turn the ignition off and start the engine to complete the reset process.

Tire Pressure Monitoring System Light Flashing

If the TPMS light continues to flash after following the reset steps, it could indicate a malfunction. Below are common reasons for a flashing TPMS light:

Issue Possible Causes Recommended Action
Low Tire Pressure Tires not inflated to the recommended level Inflate tires to the correct PSI
Faulty Sensor TPMS sensor may be damaged or malfunctioning Inspect and replace the sensor if necessary
Battery Issues TPMS sensor battery may be dead Replace the sensor battery
System Malfunction Internal issues within the TPMS Consult a professional mechanic for diagnostics

Maintaining the functionality of the TPMS is critical for ensuring safe driving conditions. Regularly check tire pressures and address any alerts promptly.

Importance of Maintaining Proper Tire Pressure

Maintaining proper tire pressure is crucial for the performance, safety, and longevity of your 2020 Nissan Pathfinder. Incorrect tire pressure can lead to a range of issues, including decreased fuel efficiency, poor handling, and increased tire wear. Moreover, driving on under-inflated or over-inflated tires can compromise your safety, increasing the risk of tire blowouts or accidents.

Proper tire pressure enhances fuel efficiency by reducing rolling resistance. When tires are inflated to the recommended levels, they provide optimal contact with the road, improving traction and handling. This not only contributes to a smoother ride but also extends the lifespan of your tires, saving you money on replacements.

How to Check Tire Pressure

Checking tire pressure is a simple yet essential task. Follow these steps to ensure your tires are properly inflated:


  1. Gather Necessary Tools: You will need a reliable tire pressure gauge.

  2. Check When Tires are Cold: Measure tire pressure when the tires are cold, ideally before driving or at least three hours after the vehicle has been parked.

  3. Remove Valve Cap: Unscrew the valve cap from the tire you want to check.

  4. Press Gauge onto Valve: Firmly press the tire pressure gauge onto the valve stem and hold it in place until you get a reading.

  5. Read the Pressure: Note the PSI reading on the gauge. Compare it with the recommended pressure found in your owner’s manual or on the driver’s side door jamb.

  6. Replace Valve Cap: After checking, replace the valve cap securely.

Useful Tips for Maintaining Tire Pressure

To ensure your tires remain at the correct pressure, consider the following tips:


  • Regular Checks: Check tire pressure at least once a month and before long trips.

  • Use a Quality Gauge: Invest in a good quality tire pressure gauge for accurate readings.

  • Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes. Check pressure during seasonal transitions.

  • Inspect for Damage: Regularly inspect tires for signs of wear, punctures, or damage that could affect pressure.

  • Consider Nitrogen Inflation: Nitrogen-filled tires maintain pressure longer than air-filled tires, especially in extreme temperatures.

By prioritizing proper tire pressure maintenance, you enhance not only the performance of your 2020 Nissan Pathfinder but also your overall driving safety and comfort.

Categories: Nissan

0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *