The 2020 Mazda 6 is a well-engineered sedan known for its performance, comfort, and sleek design. One crucial aspect of maintaining its performance is ensuring that the tire pressure is set correctly. Proper tire pressure not only enhances fuel efficiency but also improves handling and safety on the road.
Maintaining the correct tire pressure is essential for the longevity of your tires and the overall driving experience. Each trim level of the 2020 Mazda 6 has specific tire pressure requirements that should be adhered to for optimal performance. Below is a detailed tire pressure table for different trims and engines of the 2020 Mazda 6.
2020 Mazda 6 Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim Level | Engine Type | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|---|
| Sport | 2.5L I4 | 32 | 2.21 | 30 | 2.07 |
| Touring | 2.5L I4 | 32 | 2.21 | 30 | 2.07 |
| Grand Touring | 2.5L I4 | 32 | 2.21 | 30 | 2.07 |
| Grand Touring Reserve | 2.5L Turbo I4 | 32 | 2.21 | 30 | 2.07 |
| Signature | 2.5L Turbo I4 | 32 | 2.21 | 30 | 2.07 |
2020 Mazda 6 Tire Pressure Sensor Reset
When the tire pressure monitoring system (TPMS) light flashes on your 2020 Mazda 6, it indicates that the tire pressure sensors need attention. This could be due to low tire pressure, a malfunctioning sensor, or a need for recalibration. Knowing how to reset the tire pressure sensor is essential for ensuring accurate readings and maintaining safety on the road.
Steps to Reset the Tire Pressure Sensor
- Check Tire Pressure: Before resetting, ensure all tires are inflated to the recommended pressure.
- Turn on the Ignition: Insert the key and turn the ignition to the ‘ON’ position without starting the engine.
- Locate the TPMS Reset Button: This button is usually found under the steering wheel or in the glove compartment.
- Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.
- Start the Engine: Turn the ignition to the ‘OFF’ position, then start the engine. The light should turn off.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a deeper issue. Here are potential causes:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires are below the recommended PSI. |
| Faulty Sensor | A tire pressure sensor may be malfunctioning or damaged. |
| TPMS System Malfunction | The TPMS may require diagnostic testing to identify issues. |
What to Do If the Light Remains On
If the TPMS light remains illuminated after following the reset procedure, consider these actions:
- Inspect each tire for visible damage or punctures.
- Check the sensor battery; it may need replacement.
- Visit a certified mechanic or Mazda dealership for diagnostics.
Maintaining Proper Tire Pressure
Proper tire pressure is crucial for the performance and safety of your 2020 Mazda 6. Maintaining the correct PSI not only enhances fuel efficiency but also improves handling, extends tire life, and ensures optimal braking performance. Under-inflated or over-inflated tires can lead to uneven wear and increase the risk of blowouts, making regular checks essential.
How to Check Tire Pressure
Checking the tire pressure is a straightforward process. Follow these steps to ensure your tires are properly inflated:
- Gather Tools: You’ll need a reliable tire pressure gauge. Digital gauges are often more accurate than analog ones.
- Check When Cold: Measure tire pressure when the tires are cold, ideally before driving or after the car has been parked for a few hours.
- Remove Valve Caps: Unscrew the valve caps from each tire, keeping them in a safe place.
- Press Gauge onto Valve Stem: Firmly press the tire pressure gauge onto the valve stem. You should hear a hissing sound as air escapes; this is normal.
- Read the Pressure: Check the reading on the gauge and compare it to the recommended tire pressure listed in your owner’s manual or on the driver’s side door jamb.
- Adjust Pressure if Necessary: If the tire pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air until it is correct.
- Replace Valve Caps: After checking and adjusting, replace the valve caps securely.
Useful Tips for Tire Maintenance
Maintaining proper tire pressure is just one part of tire care. Here are some additional tips to keep your tires in excellent condition:
- Regular Inspections: Check your tires for signs of wear, such as cracks, bulges, or uneven tread. This should be done at least once a month.
- Rotate Tires: Rotate your tires every 5,000 to 7,500 miles to promote even wear.
- Align Wheels: Ensure your wheels are properly aligned to avoid uneven tire wear and improve handling.
- Monitor Tread Depth: Use the penny test: insert a penny into the tread with Lincoln’s head facing down. If you can see all of Lincoln’s head, it’s time for new tires.
- Know Seasonal Changes: Tire pressure can fluctuate with temperature changes. Check your tire pressure more frequently during extreme weather conditions.
By following these guidelines, you can ensure that your 2020 Mazda 6 performs at its best while keeping you safe on the road. Regular tire maintenance is a small investment for a significant return in safety, performance, and fuel efficiency.
0 Comments