The 2020 Harley Davidson Street Glide is a popular touring motorcycle known for its comfort, style, and performance. Maintaining proper tire pressure is crucial for ensuring optimal handling, safety, and tire longevity. Riders should familiarize themselves with the specific tire pressure requirements for their motorcycle’s trim and engine type to maximize its performance.
Understanding the correct tire pressure for your Street Glide can prevent uneven tire wear and enhance fuel efficiency. This knowledge is especially important for long-distance riders who depend on their bikes for comfort and reliability. Below is a detailed table outlining the recommended tire pressures for various trims and engines of the 2020 Harley Davidson Street Glide.
2020 Harley Davidson Street Glide Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Street Glide Standard | 36 | 2.48 | 40 | 2.76 |
| Street Glide Special | 36 | 2.48 | 40 | 2.76 |
| Street Glide CVO | 36 | 2.48 | 40 | 2.76 |
2020 Harley Davidson Street Glide Tire Pressure Sensor Reset
If the tire pressure monitoring system (TPMS) light is flashing on your 2020 Harley Davidson Street Glide, it indicates that the system has detected an issue. This could be due to low tire pressure, a malfunctioning sensor, or the need to reset the system after adjusting tire pressures. Resetting the tire pressure sensor is a straightforward process that can help ensure your motorcycle runs safely and efficiently.
Steps to Reset the Tire Pressure Sensor
- Check Tire Pressures: Ensure all tires are inflated to the recommended PSI as outlined in the tire pressure table.
- Turn on the Ignition: Insert the key fob and turn the ignition to the “On” position without starting the engine.
- Locate the TPMS Reset Button: This is typically found under the dash or near the instrument cluster.
- Press and Hold the Reset Button: Hold the button for about 3 seconds until the TPMS light blinks and then turns off.
- Start the Engine: Turn the ignition off, then start the motorcycle. This should complete the reset process.
What to Do If the TPMS Light Continues to Flash
If the TPMS light continues to flash after resetting, it may indicate a deeper issue. Here are some steps to troubleshoot:
- Inspect for Leaks: Check for any visible punctures or leaks in the tires.
- Check Sensor Functionality: Ensure that the tire pressure sensors are functioning properly. This may require a diagnostic tool.
- Consult the Owner’s Manual: Refer to the manual for specific troubleshooting tips related to your model.
- Visit a Professional: If problems persist, take your motorcycle to a certified Harley Davidson dealer for a thorough inspection.
Tire Pressure Monitoring System Light Troubleshooting
If the TPMS light is flashing, it’s crucial to address the issue promptly. Below is a table outlining potential causes and solutions for a flashing TPMS light.
| Issue | Possible Cause | Recommended Action |
|---|---|---|
| Flashing TPMS Light | Low Tire Pressure | Inflate tires to recommended PSI. |
| Flashing TPMS Light | Faulty Tire Pressure Sensor | Replace or repair the sensor. |
| Flashing TPMS Light | TPMS System Malfunction | Run a diagnostic check at a dealership. |
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is essential for any motorcycle, including the 2020 Harley Davidson Street Glide. Correct tire pressure affects not only the safety and handling of the bike but also its overall performance and fuel efficiency. Under-inflated tires can lead to increased rolling resistance, reduced traction, and a higher risk of tire blowouts. Conversely, over-inflated tires can result in a harsh ride and uneven tire wear.
Regularly checking and adjusting tire pressure ensures that your motorcycle performs optimally. It also enhances safety by improving braking performance and handling stability. In essence, keeping your tire pressure within the recommended range is a simple yet effective way to prolong the life of your tires and enhance your riding experience.
How to Check Tire Pressure
Checking the tire pressure on your Harley Davidson Street Glide is a straightforward process. Follow these steps to ensure accurate readings:
- Gather Tools: You will need a reliable tire pressure gauge. Digital gauges are often more accurate than analog ones.
- Check When Cold: Tire pressure should be checked when the tires are cold, ideally before riding or after sitting for a few hours.
- Remove Valve Cap: Unscrew the valve cap from the tire you wish to check.
- Press Gauge Firmly: Place the tire pressure gauge onto the valve stem and press down firmly to get a reading.
- Read Pressure: Note the PSI reading displayed on the gauge.
- Replace Valve Cap: After checking, replace the valve cap securely to prevent dirt from entering.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain in optimal condition, consider the following tips:
- Check Regularly: Make it a habit to check tire pressure at least once a month and before long rides.
- Know the Recommended PSI: Familiarize yourself with the recommended tire pressures for your specific model, as outlined in the owner’s manual.
- Inspect for Damage: Regularly inspect your tires for any signs of wear, punctures, or other damage.
- Use a Quality Gauge: Invest in a good-quality tire pressure gauge for accurate readings.
- Adjust for Load: If you plan to carry extra weight or passengers, adjust the tire pressure accordingly, as specified in the owner’s manual.
- Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes; check your tires more frequently in extreme weather.
By following these guidelines, you can ensure that your 2020 Harley Davidson Street Glide remains safe, efficient, and enjoyable to ride.
0 Comments