The 2020 Harley-Davidson Road Glide is a popular touring motorcycle known for its comfort and performance. Proper tire pressure is crucial for ensuring optimal handling, safety, and tire longevity. Riders must be aware of the recommended tire pressures for their specific trim or engine type to maintain peak performance.
Maintaining the correct tire pressure not only enhances the riding experience but also contributes to safety on the road. Under-inflated tires can lead to poor handling and increased tire wear, while over-inflated tires can result in a harsh ride and reduced traction. Below is a detailed table outlining the recommended tire pressures for various trims and engine configurations of the 2020 Harley-Davidson Road Glide.
2020 Harley-Davidson Road Glide Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Road Glide Special | 36 | 2.48 | 40 | 2.76 |
| Road Glide Standard | 36 | 2.48 | 40 | 2.76 |
| Road Glide Limited | 36 | 2.48 | 40 | 2.76 |
| Road Glide Ultra | 36 | 2.48 | 40 | 2.76 |
Resetting the Tire Pressure Sensor on the 2020 Harley-Davidson Road Glide
The tire pressure monitoring system (TPMS) is an essential feature in modern motorcycles, including the 2020 Harley-Davidson Road Glide. It alerts riders when tire pressure is too low or too high. If the TPMS light is flashing, it indicates that the system requires attention, often due to a reset being necessary after adjusting tire pressures or after a tire change.
Resetting the tire pressure sensor is a straightforward process that ensures the TPMS functions correctly. Follow these steps to reset the sensor effectively.
Steps to Reset the Tire Pressure Sensor
- Ensure that the tires are inflated to the recommended pressure as per the specifications.
- Turn on the ignition without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering column or in the fuse box.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the engine and drive the motorcycle for a few minutes to allow the system to recalibrate.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it could indicate a malfunction or a persistent issue. Here are some common reasons for a flashing TPMS light:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires are below the recommended pressure. |
| Faulty Sensor | A tire pressure sensor may be damaged or malfunctioning. |
| Battery Issues | The battery in the tire pressure sensor may need replacement. |
| Calibration Needed | The system may require recalibration after tire changes. |
What to Do If the Light Remains On
If the TPMS light remains illuminated or continues to flash after following the reset procedure, consider the following actions:
- Check all tire pressures again to ensure they are at the correct levels.
- Inspect the tires for any visible damage or punctures.
- Consult the owner’s manual for specific troubleshooting steps.
- Visit a certified Harley-Davidson dealership for professional diagnostics and repairs.
Understanding the Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is critical for the performance, safety, and longevity of your 2020 Harley-Davidson Road Glide. Correct tire pressure ensures optimal handling and stability, which is especially important during long rides or in challenging weather conditions. Under-inflated tires can lead to increased rolling resistance, reduced fuel efficiency, and accelerated tire wear. Conversely, over-inflated tires can cause a harsh ride and diminish traction, leading to a higher risk of accidents.
Regularly checking and maintaining the recommended tire pressure is essential not just for performance, but also for rider safety. A well-maintained tire can better absorb shocks from the road, provide better grip, and improve overall riding comfort.
How to Check Tire Pressure
Checking the tire pressure on your Harley-Davidson Road Glide is a simple but essential task. Follow these steps to ensure accurate readings:
- Purchase a reliable tire pressure gauge, either digital or analog.
- Ensure the motorcycle has been parked for at least a few hours, allowing the tires to cool down for accurate readings.
- Remove the valve cap from the tire you wish to check.
- Press the tire pressure gauge onto the valve stem firmly to get a reading.
- Note the pressure reading and compare it with the recommended pressure listed in the owner’s manual.
- If necessary, add or release air to achieve the correct pressure.
- Replace the valve cap securely after checking.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain in optimal condition, consider the following tips:
- Check tire pressure at least once a month and before long trips.
- Inspect tires for any signs of wear or damage, such as cracks or bulges.
- Use a high-quality tire pressure gauge for accurate measurements.
- Be aware that tire pressure can fluctuate with temperature changes. Check pressures during different seasons.
- Keep a portable air compressor handy for quick adjustments on the road.
- Familiarize yourself with the recommended tire pressure for both the front and rear tires.
- Consider joining a motorcycle maintenance group or forum to share tips and experiences with other riders.
By prioritizing proper tire pressure maintenance, you enhance your riding experience, improve safety, and extend the life of your tires. Regular checks and adjustments are key to enjoying the open road on your Harley-Davidson Road Glide.
0 Comments