The 2020 Ford Explorer is a versatile SUV known for its performance, comfort, and advanced technology. Proper tire maintenance is crucial for ensuring safety, fuel efficiency, and optimal handling. One of the key aspects of tire maintenance is maintaining the correct tire pressure, which can vary based on the trim and engine type of the vehicle.
Understanding the specific tire pressure requirements for your 2020 Ford Explorer can help you avoid potential issues on the road. Below is a detailed table outlining the recommended tire pressure specifications for different trims and engine configurations, measured in both PSI and BAR.
2020 Ford Explorer Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| XLT 2.3L | 35 | 2.41 | 35 | 2.41 |
| Limited 2.3L | 35 | 2.41 | 35 | 2.41 |
| ST 3.0L | 36 | 2.48 | 36 | 2.48 |
| Platinum 3.0L | 36 | 2.48 | 36 | 2.48 |
| Base 2.3L | 35 | 2.41 | 35 | 2.41 |
2020 Ford Explorer Tire Pressure Sensor Reset
When the tire pressure monitoring system (TPMS) light is flashing on your 2020 Ford Explorer, it indicates that there may be an issue with the tire pressure sensors or that the tire pressure is significantly low. Resetting the tire pressure sensor is essential to ensure that your vehicle accurately monitors tire pressure and maintains safety on the road.
Steps to Reset Tire Pressure Sensor
To reset the tire pressure sensor on your 2020 Ford Explorer, follow these steps:
- Ensure all tires are inflated to the recommended pressure as listed in the owner’s manual.
- Turn the ignition key to the “ON” position without starting the engine.
- Locate the TPMS reset button, which is typically found beneath the steering wheel or on the dashboard.
- Press and hold the reset button until the TPMS light blinks three times, then release it.
- Start the engine and let it run for a few minutes. The TPMS light should turn off if the reset is successful.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a malfunction in the tire pressure monitoring system. Here are some potential causes:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may be under-inflated. |
| Faulty Sensor | A tire pressure sensor may be malfunctioning or damaged. |
| Battery Issues | The sensor battery may be dead, requiring replacement. |
| System Malfunction | The TPMS may have a fault that needs professional diagnosis. |
What to Do If the Light Remains On
If the TPMS light remains on or continues to flash after following the reset steps, consider these actions:
- Check the tire pressure in all tires, including the spare.
- Inspect the tires for any visible damage or punctures.
- Visit a certified mechanic or tire specialist for a thorough inspection.
- Consider having the TPMS system scanned for error codes.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance, safety, and longevity of your 2020 Ford Explorer. Incorrect tire pressure can lead to various issues, including poor fuel efficiency, uneven tire wear, and compromised handling. Keeping your tires inflated to the recommended levels enhances traction and stability, especially in adverse weather conditions.
Consequences of Improper Tire Pressure
Driving with under-inflated or over-inflated tires can have significant drawbacks:
- Reduced Fuel Efficiency: Low tire pressure increases rolling resistance, causing the engine to work harder and consume more fuel.
- Increased Tire Wear: Improperly inflated tires wear out faster, leading to the need for premature replacements.
- Compromised Safety: Low tire pressure can affect braking distance and overall vehicle control, increasing the risk of accidents.
- Risk of Blowouts: Over-inflated tires are more susceptible to blowouts, especially on hot roads.
How to Check Tire Pressure
Regularly checking your tire pressure is vital for maintaining optimal performance. Here’s how to do it:
- Gather Necessary Tools: You will need a reliable tire pressure gauge, which can be digital or analog.
- Check When Cold: Measure tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for a few hours.
- Remove Valve Cap: Unscrew the valve cap from the tire you wish to check.
- Press Gauge: Firmly press the tire pressure gauge onto the valve stem to get a reading. Make sure there is no hissing sound, which indicates air escaping.
- Read the Pressure: Note the PSI reading on the gauge and compare it to the recommended pressure found on the driver’s side door jamb.
- Adjust as Necessary: If the pressure is too low, inflate the tire to the recommended level. If it’s too high, release some air until it reaches the correct PSI.
- Replace Valve Cap: Don’t forget to screw the valve cap back on securely.
Useful Tips for Tire Maintenance
To ensure your tires remain in good condition, consider the following tips:
- Regular Inspections: Check your tires for signs of wear, damage, or foreign objects regularly.
- Rotate Tires: Rotate your tires every 5,000 to 7,500 miles to promote even wear.
- Alignment Checks: Ensure your wheels are properly aligned to avoid uneven tire wear and enhance handling.
- Monitor Weather Conditions: Be aware that temperature changes can affect tire pressure; check more frequently during extreme weather.
- Use a Quality Gauge: Invest in a good tire pressure gauge for accurate readings.
Maintaining proper tire pressure is not just a routine task; it’s a critical component of vehicle safety and performance. Regular checks and adjustments can lead to a more enjoyable driving experience and extend the life of your tires.
0 Comments