The 2019 Toyota Yaris is a compact car known for its efficiency and reliability. One of the crucial aspects of maintaining your Yaris is ensuring that the tire pressure is kept at the manufacturer’s recommended levels. Proper tire pressure not only enhances fuel efficiency but also ensures safety and optimal performance on the road.

Maintaining the correct tire pressure is essential for the longevity of your tires and the overall driving experience. The recommended tire pressure can vary depending on the specific trim and engine type of the Yaris. Below are the details for the tire pressure specifications for different trims of the 2019 Toyota Yaris.

2019 Toyota Yaris Tire Pressure

Tire Pressure Table for Different Trim/Engine

Trim/Engine Front Tire Pressure (PSI) Front Tire Pressure (BAR) Rear Tire Pressure (PSI) Rear Tire Pressure (BAR)
Yaris L 32 2.2 32 2.2
Yaris LE 32 2.2 32 2.2
Yaris XLE 32 2.2 32 2.2
Yaris Hatchback 32 2.2 32 2.2

2019 Toyota Yaris Tire Pressure Sensor Reset

The tire pressure monitoring system (TPMS) in the 2019 Toyota Yaris is designed to alert you when tire pressure is too low. However, after correcting the tire pressure, you may notice that the TPMS light continues to flash. Resetting the tire pressure sensor is essential for ensuring that the system accurately reflects the current tire conditions.

To reset the tire pressure sensor, follow these steps:

Steps to Reset Tire Pressure Sensor


  1. Check and adjust the tire pressures for all tires to the recommended levels.

  2. Turn the ignition to the “ON” position without starting the engine.

  3. Locate the TPMS reset button, usually found beneath the steering wheel or in the glove compartment.

  4. Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.

  5. Start the engine and wait for a few minutes for the system to recalibrate.

If the TPMS light continues to flash after following these steps, there may be an issue with the system itself.

Tire Pressure Monitoring System Light Flashing

A flashing TPMS light can indicate various issues:

Indicator Possible Cause Action Required
Flashing Light Low Tire Pressure Check and inflate tires to recommended pressure.
Flashing Light Faulty Sensor Inspect or replace the tire pressure sensor.
Flashing Light TPMS Malfunction Consult a professional mechanic for diagnostics.

Regularly checking your tire pressure and understanding how to reset the TPMS can help maintain the health of your vehicle.

Importance of Maintaining Proper Tire Pressure

Maintaining the correct tire pressure is crucial for the safety and performance of your 2019 Toyota Yaris. Proper tire pressure affects various aspects of driving, including fuel efficiency, tire longevity, and overall vehicle handling. Under-inflated tires can lead to increased rolling resistance, which negatively impacts fuel economy. Conversely, over-inflated tires may cause uneven wear and reduce traction.

In addition to performance, correct tire pressure is vital for safety. Tires that are not inflated to the recommended levels can lead to blowouts or loss of control while driving. Regularly checking and maintaining your tire pressure can prevent these potentially dangerous situations.

How to Check Tire Pressure

Checking the tire pressure of your Yaris is a straightforward process. Follow these steps to ensure your tires are at the correct pressure:


  1. Purchase a reliable tire pressure gauge. These are available at auto parts stores or online.

  2. Make sure your tires are cold, as tire pressure can increase with heat from driving.

  3. Remove the valve cap from the tire you want to check.

  4. Press the tire pressure gauge onto the valve stem firmly to get a reading.

  5. Note the pressure displayed on the gauge and compare it to the recommended pressure listed in your owner’s manual or on the driver’s side door jamb.

  6. If the pressure is too low or too high, adjust accordingly by adding or releasing air.

  7. Replace the valve cap securely after checking.

Useful Tips for Maintaining Tire Pressure

Here are some practical tips to help you maintain proper tire pressure in your Yaris:


  • Check tire pressure at least once a month and before long trips.

  • Inspect tires for visible damage, such as cuts or bulges, which may affect pressure.

  • Rotate your tires regularly to ensure even wear and maintain performance.

  • Be mindful of temperature changes; tire pressure can drop in colder weather.

  • Use nitrogen instead of air for inflation, as it can help maintain pressure longer.

  • Keep a portable air compressor in your vehicle for quick adjustments.

By adhering to these practices, you can enhance the safety, performance, and longevity of your 2019 Toyota Yaris while ensuring a comfortable driving experience.

Categories: Toyota

0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *