The 2019 Subaru Forester is a versatile compact SUV known for its spacious interior, advanced safety features, and all-weather capabilities. One critical aspect of maintaining its performance and safety is ensuring that the tire pressure is set correctly. Proper tire pressure not only enhances fuel efficiency but also improves handling and prolongs the lifespan of the tires.
Understanding the recommended tire pressure for different trims and engine configurations is essential for every Forester owner. The following sections provide detailed information on the appropriate tire pressure settings in both PSI and BAR for various trims of the 2019 Subaru Forester.
2019 Subaru Forester Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Base | 33 | 2.3 | 32 | 2.2 |
| Premium | 33 | 2.3 | 32 | 2.2 |
| Sport | 33 | 2.3 | 32 | 2.2 |
| Limited | 33 | 2.3 | 32 | 2.2 |
| Touring | 33 | 2.3 | 32 | 2.2 |
2019 Subaru Forester Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2019 Subaru Forester is designed to alert drivers when tire pressure is too low. However, there are times when the TPMS light may flash or remain illuminated even after correcting the tire pressure. This can happen after inflating the tires or changing a tire. Resetting the tire pressure sensor is a straightforward process that ensures the system functions correctly.
Follow these steps to reset the tire pressure sensor in your 2019 Subaru Forester:
Steps to Reset Tire Pressure Sensor
- Ensure all tires are inflated to the recommended pressure.
- Turn the ignition switch to the “ON” position without starting the engine.
- Locate the TPMS reset button, typically found under the steering column or near the dashboard.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the engine, and the TPMS light should turn off after a few moments.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a malfunction in the system or a persistent low tire pressure issue. Here are some common reasons for a flashing TPMS light:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires are under-inflated, requiring immediate attention. |
| Faulty Sensor | The TPMS sensor in one or more tires may be malfunctioning. |
| Battery Issues | The battery in the TPMS sensor may be dead, requiring replacement. |
| System Malfunction | A malfunction in the TPMS itself may require professional diagnosis. |
What to Do If the Light Remains On
If the TPMS light remains illuminated or continues to flash after following the reset procedure, consider these actions:
- Check the tire pressures again to ensure they are all at the recommended levels.
- Inspect tires for visible damage or punctures that may cause air loss.
- Consult the vehicle’s owner’s manual for specific troubleshooting steps.
- Visit a certified Subaru technician for a thorough inspection of the TPMS.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the performance and safety of your 2019 Subaru Forester. Correct tire pressure affects handling, fuel efficiency, and tire longevity. Under-inflated tires can lead to increased rolling resistance, resulting in poor fuel economy and more frequent tire replacements. Conversely, over-inflated tires can cause a harsher ride and reduce traction, especially on wet or slippery surfaces.
Properly inflated tires also ensure optimal contact with the road, enhancing stability and control. This is particularly important in adverse weather conditions, where tire performance can significantly impact safety. Regularly checking and maintaining the correct tire pressure can prevent blowouts and improve overall vehicle performance.
How to Check Tire Pressure
Checking tire pressure is a simple task that can be done at home or at a gas station. Follow these steps to ensure your tires are properly inflated:
- Obtain a reliable tire pressure gauge. Digital gauges are often more accurate than manual ones.
- Ensure that the tires are cold, ideally before driving or after the vehicle has been parked for at least three hours.
- Remove the valve cap from the tire you want to check.
- Press the tire pressure gauge onto the valve stem until you hear a hissing sound, which indicates air is being released.
- Read the pressure displayed on the gauge and compare it to the recommended pressure listed on the driver’s side door jamb or in the owner’s manual.
- If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air until it is correct.
- Replace the valve cap securely and repeat the process for all tires.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain in optimal condition, consider these helpful tips:
- Check tire pressure at least once a month and before long trips.
- Inspect tires for signs of wear, such as uneven tread or cracks, which may indicate pressure issues.
- Be aware of seasonal changes, as temperature fluctuations can affect tire pressure. For every 10°F change in temperature, tire pressure can change by approximately 1 PSI.
- Use nitrogen instead of regular air for inflation, as it can help maintain pressure longer due to reduced permeability.
- Rotate tires regularly to ensure even wear and maintain proper alignment.
By following these recommendations, you can enhance the safety, efficiency, and longevity of your 2019 Subaru Forester’s tires. Regular maintenance of tire pressure is a small investment of time that pays off in performance and safety.
0 Comments