The 2019 Subaru Crosstrek is a versatile compact SUV known for its all-wheel-drive capabilities and rugged design. Proper tire maintenance is crucial for optimal performance, safety, and fuel efficiency. One of the key aspects of tire maintenance is ensuring that the tire pressure is within the manufacturer’s recommended range.
Maintaining the correct tire pressure can significantly impact handling, tread wear, and overall driving comfort. This article provides detailed tire pressure specifications for different trims and engine options of the 2019 Subaru Crosstrek. Understanding these specifications will help you keep your vehicle in top condition.
2019 Subaru Crosstrek Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim Level | Engine Type | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|---|
| Base | 2.0L 4-Cylinder | 33 | 2.3 | 32 | 2.2 |
| Premium | 2.0L 4-Cylinder | 33 | 2.3 | 32 | 2.2 |
| Limited | 2.0L 4-Cylinder | 33 | 2.3 | 32 | 2.2 |
| Hybrid | 2.0L 4-Cylinder + Electric | 33 | 2.3 | 32 | 2.2 |
2019 Subaru Crosstrek Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2019 Subaru Crosstrek is designed to alert drivers when tire pressure is too low, which can lead to unsafe driving conditions. Occasionally, the TPMS light may flash or remain illuminated even after correcting the tire pressure. This can happen due to various reasons, including a recent tire rotation, changes in tire pressure, or a malfunctioning sensor. Resetting the TPMS is a straightforward process that can be done at home.
Steps to Reset the Tire Pressure Sensor
- Ensure all tires are inflated to the recommended pressure levels, as specified in the owner’s manual or on the driver’s side door jamb.
- Turn the ignition key to the “ON” position without starting the engine.
- Locate the TPMS reset button, usually found below the steering wheel or on the center console.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release the button.
- Start the engine and allow it to run for a few minutes to complete the reset process.
- Check if the TPMS light turns off. If it remains on, repeat the process or consult a professional mechanic.
Tire Pressure Monitoring System Light Flashing
If the TPMS light is flashing, it indicates a malfunction in the system itself. This could be due to a dead battery in one of the tire sensors or a communication error. Here’s how to address this issue:
What to Do When the TPMS Light is Flashing
- Check the tire pressures again to ensure they are all within the recommended range.
- Inspect each tire for visible damage or signs of a puncture.
- Examine the TPMS sensors for any signs of corrosion or damage.
- Consider having the vehicle scanned for error codes using an OBD-II scanner.
- If necessary, replace the faulty TPMS sensor or consult a Subaru dealership for further assistance.
TPMS Light Reset Table
| Condition | Action Required |
|---|---|
| TPMS Light Solid | Check and adjust tire pressures |
| TPMS Light Flashing | Inspect for sensor issues or system malfunction |
| TPMS Light Off | All systems normal; tire pressures are correct |
Importance of Maintaining Proper Tire Pressure
Maintaining the correct tire pressure is essential for the overall performance, safety, and longevity of your vehicle. For the 2019 Subaru Crosstrek, proper tire pressure ensures optimal handling, fuel efficiency, and tire wear. Under-inflated tires can lead to increased rolling resistance, reduced fuel economy, and uneven tread wear, while over-inflated tires may result in a harsher ride and a higher risk of blowouts.
Benefits of Proper Tire Pressure
- Enhanced Safety: Properly inflated tires provide better traction, improving your vehicle’s handling and stability.
- Improved Fuel Efficiency: Maintaining the recommended tire pressure can enhance fuel economy, saving you money at the pump.
- Extended Tire Life: Correct inflation helps to avoid premature tire wear, prolonging the lifespan of your tires.
- Comfortable Ride: Properly inflated tires contribute to a smoother and more comfortable driving experience.
How to Check Tire Pressure
Regularly checking your tire pressure is a simple yet vital maintenance task. Follow these steps to ensure your tires are properly inflated:
- Gather Tools: You will need a reliable tire pressure gauge, which can be digital or analog.
- Check When Cold: Measure tire pressure when the tires are cold, ideally before driving or at least three hours after the vehicle has been parked.
- Remove Valve Cap: Unscrew the valve cap from the tire you want to check.
- Press Gauge: Press the tire pressure gauge onto the valve stem firmly to get a reading.
- Read Pressure: Check the gauge to see the current tire pressure in PSI or BAR.
- Compare with Recommendations: Compare the reading with the recommended tire pressure listed in the owner’s manual or on the driver’s side door jamb.
- Adjust as Needed: Inflate or deflate the tire to reach the recommended pressure, then replace the valve cap.
Useful Tips for Tire Maintenance
To ensure optimal tire performance, consider these additional tips:
- Regular Inspections: Check your tires for signs of wear, damage, or foreign objects regularly.
- Rotate Tires: Rotate your tires every 5,000 to 7,500 miles to promote even wear.
- Alignment Checks: Have your wheel alignment checked if you notice uneven tire wear or if the vehicle pulls to one side.
- Seasonal Adjustments: Adjust tire pressure according to seasonal temperature changes, as pressure can drop in colder weather.
- Keep a Tire Pressure Gauge: Invest in a quality tire pressure gauge and keep it in your vehicle for easy access.
0 Comments