The 2019 Subaru Ascent is a midsize SUV that offers a combination of comfort, technology, and performance. One crucial aspect of vehicle maintenance is ensuring that the tire pressure is always at the recommended levels. Proper tire pressure not only enhances fuel efficiency but also improves handling and safety on the road.
Maintaining the correct tire pressure is essential for the longevity of your tires and the overall performance of your vehicle. The 2019 Subaru Ascent comes in various trims, each with specific tire pressure requirements. Understanding these specifications will help you keep your vehicle in optimal condition.
2019 Subaru Ascent Tire Pressure
Tire Pressure Specifications
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Ascent Base | 33 | 2.3 | 33 | 2.3 |
| Ascent Premium | 33 | 2.3 | 33 | 2.3 |
| Ascent Limited | 33 | 2.3 | 33 | 2.3 |
| Ascent Touring | 33 | 2.3 | 33 | 2.3 |
2019 Subaru Ascent Tire Pressure Sensor Reset
When the tire pressure monitoring system (TPMS) light on your 2019 Subaru Ascent flashes, it indicates a potential issue with your tire pressure. This could be due to low tire pressure or a malfunctioning sensor. Resetting the tire pressure sensor is a straightforward process that can help ensure your vehicle operates safely and efficiently.
Steps to Reset the Tire Pressure Sensor
- Check the Tire Pressure: Before resetting, verify that all tires are inflated to the recommended PSI levels.
- Turn on the Ignition: Insert the key into the ignition and turn it to the “On” position without starting the engine.
- Locate the TPMS Reset Button: The reset button is usually found beneath the steering wheel or in the glove compartment.
- Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.
- Start the Engine: Turn off the ignition, then start the engine to check if the light has turned off.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a more serious issue. Here are some possible reasons:
| Issue | Description |
|---|---|
| Low Tire Pressure | Check for any tires that may be under-inflated and inflate them to the recommended pressure. |
| Faulty Sensor | A malfunctioning sensor may need replacement or recalibration. |
| Damaged Tire | Inspect for any visible damage or punctures that could cause air loss. |
| System Malfunction | In some cases, the TPMS itself may require professional diagnosis and repair. |
Tips for Maintaining the TPMS
- Regularly check tire pressure, especially before long trips.
- Replace tires with TPMS-compatible models when needed.
- Have your TPMS checked during routine vehicle maintenance.
- Be aware of temperature changes, as they can affect tire pressure.
Importance of Maintaining Proper Tire Pressure
Maintaining the correct tire pressure is crucial for the overall performance and safety of your 2019 Subaru Ascent. Under-inflated tires can lead to increased rolling resistance, which negatively impacts fuel efficiency. Conversely, over-inflated tires can result in reduced traction and uneven tire wear. Both conditions can compromise vehicle handling and safety.
Proper tire pressure also plays a significant role in tire longevity. Tires that are consistently inflated to the recommended levels wear evenly, extending their lifespan and saving you money on replacements. Additionally, maintaining the right pressure helps ensure optimal braking performance, especially in emergency situations.
How to Check Tire Pressure
Checking the tire pressure is a straightforward process that can be done at home with a few simple tools. Follow these steps to ensure your tires are properly inflated:
- Gather Your Tools: You will need a reliable tire pressure gauge and an air compressor if adjustments are necessary.
- Check When Cold: For the most accurate reading, check tire pressure when the tires are cold, ideally before driving.
- Remove the Valve Cap: Unscrew the valve cap from the tire you want to check.
- Insert the Tire Pressure Gauge: Press the gauge onto the valve stem firmly to get a reading.
- Read the Pressure: Note the PSI reading on the gauge and compare it to the recommended pressure found in your owner’s manual or on the driver’s side door jamb.
- Adjust as Needed: If the pressure is too low, use an air compressor to inflate the tire. If it’s too high, release some air until it reaches the recommended level.
- Replace the Valve Cap: After checking and adjusting, make sure to screw the valve cap back on securely.
Useful Tips for Tire Pressure Maintenance
To keep your tires in optimal condition, consider the following tips:
- Check Tire Pressure Monthly: Regular checks can help catch issues before they become serious.
- Monitor Temperature Changes: Tire pressure can drop in colder weather, so check more frequently during seasonal changes.
- Inspect Tires for Damage: Regularly look for cuts, punctures, or bulges that could affect tire performance.
- Rotate Tires Regularly: Follow the manufacturer’s recommendations for tire rotation to promote even wear.
- Be Aware of Load Changes: If you frequently carry heavy loads, adjust your tire pressure according to the vehicle’s load recommendations.
By consistently maintaining proper tire pressure, you enhance your vehicle’s safety, performance, and efficiency. This simple yet vital task can make a significant difference in your driving experience.
0 Comments