The 2019 Harley Davidson Street Glide is a popular touring motorcycle known for its comfort and performance on long rides. Proper tire pressure is critical for safety, handling, and tire longevity. Riders must ensure that their tires are inflated to the recommended levels to maintain optimal performance and ensure a smooth ride.
Maintaining the correct tire pressure not only enhances the riding experience but also contributes to fuel efficiency and tire wear. Each trim or engine variant of the Street Glide may have specific tire pressure requirements. Below is a detailed table outlining the recommended tire pressures for different trims and engine configurations of the 2019 Harley Davidson Street Glide.
2019 Harley Davidson Street Glide Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Street Glide Special | 36 | 2.5 | 40 | 2.8 |
| Street Glide | 36 | 2.5 | 40 | 2.8 |
| Street Glide with 114 Engine | 36 | 2.5 | 40 | 2.8 |
| Street Glide with 107 Engine | 36 | 2.5 | 40 | 2.8 |
Resetting the Tire Pressure Sensor on the 2019 Harley Davidson Street Glide
The tire pressure monitoring system (TPMS) is a crucial component of the 2019 Harley Davidson Street Glide. When the TPMS light starts flashing, it indicates that there is an issue with the tire pressure sensors, usually due to low tire pressure or a malfunctioning sensor. Resetting the tire pressure sensor is essential for maintaining accurate readings and ensuring safe riding conditions.
Follow these steps to reset the tire pressure sensor:
Steps to Reset the Tire Pressure Sensor
- Ensure that all tires are inflated to the recommended pressure levels.
- Turn the ignition to the “ON” position without starting the engine.
- Locate the TPMS reset button, usually found under the dashboard or near the steering column.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the engine and allow the motorcycle to run for a few minutes.
- Check if the TPMS light has turned off. If it remains on, repeat the reset process.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a more serious issue. Here are some common reasons for a flashing TPMS light:
| Possible Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may be under-inflated, triggering the warning light. |
| Faulty Sensor | A malfunctioning tire pressure sensor may need to be replaced. |
| Battery Issues | The battery in the tire pressure sensor may be dead or low. |
| Improper Installation | The tire pressure sensor may not be properly installed, causing communication errors. |
What to Do Next
If the TPMS light continues to flash after following the reset steps, consider the following actions:
- Check tire pressures with a reliable gauge.
- Inspect tires for any visible damage or leaks.
- Visit a certified Harley Davidson dealer for a diagnostic check.
- Replace any faulty tire pressure sensors as needed.
Addressing a flashing TPMS light promptly is vital for safe riding and optimal performance of the 2019 Harley Davidson Street Glide.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is essential for the safety and performance of your motorcycle. For the 2019 Harley Davidson Street Glide, correct tire pressure affects handling, braking, and overall riding comfort. Under-inflated tires can lead to poor handling, increased tire wear, and a higher risk of blowouts. Conversely, over-inflated tires can reduce traction and make the ride uncomfortable.
Proper tire pressure also contributes to better fuel efficiency. When tires are inflated to the recommended levels, they roll more efficiently, reducing the amount of energy required to maintain speed. This not only saves fuel but also minimizes emissions, making your rides more environmentally friendly.
How to Check Tire Pressure
Checking the tire pressure on your Harley Davidson Street Glide is a straightforward process. Follow these steps to ensure your tires are properly inflated:
- Purchase a reliable tire pressure gauge, either digital or analog.
- Make sure the tires are cold, as pressure readings can fluctuate with heat from riding.
- Remove the valve cap from the tire you want to check.
- Press the tire pressure gauge onto the valve stem firmly to get an accurate reading.
- Note the reading and compare it to the recommended pressure listed in the owner’s manual.
- If necessary, adjust the tire pressure using an air compressor or by releasing some air.
- Replace the valve cap securely after checking.
Useful Tips for Tire Maintenance
To ensure your tires remain in optimal condition, consider these practical tips:
- Check tire pressure at least once a month and before long rides.
- Inspect tires for any signs of wear, such as cracks, bulges, or uneven tread wear.
- Rotate your tires regularly to promote even wear and extend tire life.
- Keep an eye on the tread depth; replace tires that are worn below the recommended levels.
- Store your motorcycle in a cool, dry place to prevent tire degradation.
- Use a tire pressure monitoring system (TPMS) if available, for real-time pressure readings.
By adhering to these guidelines, you will not only enhance your riding experience but also ensure the longevity and safety of your 2019 Harley Davidson Street Glide. Proper tire maintenance is an investment in your motorcycle’s performance and your safety on the road.
0 Comments