The 2019 Harley Davidson Road Glide is a popular touring motorcycle known for its comfort and performance. Proper tire pressure is crucial for ensuring optimal handling, safety, and tire longevity. Maintaining the correct pressure not only enhances the riding experience but also helps in fuel efficiency and stability on the road.
Understanding the required tire pressure for different trims and engines of the 2019 Road Glide can help riders make informed decisions. Below is a detailed table outlining the recommended tire pressures in both PSI and BAR for various configurations of the motorcycle.
2019 Harley Davidson Road Glide Tire Pressure
Recommended Tire Pressure Table
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Road Glide Standard | 36 | 2.5 | 40 | 2.8 |
| Road Glide Special | 36 | 2.5 | 40 | 2.8 |
| Road Glide Ultra | 36 | 2.5 | 42 | 2.9 |
Resetting the Tire Pressure Sensor on the 2019 Harley Davidson Road Glide
The tire pressure monitoring system (TPMS) on the 2019 Harley Davidson Road Glide is designed to alert riders when tire pressure is not at the recommended levels. If the TPMS light is flashing, it indicates a problem that needs to be addressed. Resetting the tire pressure sensor is an essential step to ensure the system functions correctly and provides accurate readings.
Steps to Reset the Tire Pressure Sensor
- Check the Tire Pressure: Before resetting the sensor, ensure that all tires are inflated to the recommended pressure.
- Turn on the Ignition: Start your motorcycle and let it run for a few moments.
- Locate the TPMS Reset Button: This button is typically found under the seat or near the fuse box. Refer to the owner’s manual for exact location.
- Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.
- Turn Off the Ignition: After resetting, turn off the motorcycle and wait a few seconds.
- Start the Motorcycle Again: Check if the TPMS light has turned off. If it remains on, repeat the process or consult a technician.
Tire Pressure Monitoring System Light Issues
If the TPMS light continues to flash after attempting to reset, there may be other underlying issues. Here’s a table summarizing potential causes and solutions:
| Issue | Description | Solution |
|---|---|---|
| Low Tire Pressure | One or more tires are below the recommended pressure. | Inflate tires to the correct PSI. |
| Faulty Sensor | The tire pressure sensor may be malfunctioning. | Replace the faulty sensor. |
| Battery Issues | The battery in the tire pressure sensor may be dead. | Replace the sensor battery. |
| System Errors | There may be a software glitch in the TPMS. | Consult a technician for a system reset. |
Regular Maintenance Tips
To prevent future TPMS issues, consider the following maintenance tips:
- Regularly check tire pressure before rides.
- Inspect tires for wear and damage.
- Replace tire pressure sensors as needed, typically every 5-7 years.
- Keep track of tire pressure changes with temperature fluctuations.
Maintaining Proper Tire Pressure for Optimal Performance
Proper tire pressure is crucial for the performance and safety of your motorcycle. For the 2019 Harley Davidson Road Glide, maintaining the correct tire pressure enhances handling, stability, and overall ride comfort. Under-inflated or over-inflated tires can lead to uneven wear, decreased fuel efficiency, and an increased risk of tire blowouts.
Importance of Maintaining Proper Tire Pressure
- Safety: Properly inflated tires provide better traction and handling, reducing the likelihood of accidents.
- Tire Longevity: Maintaining the correct pressure helps prevent premature tire wear, saving you money on replacements.
- Fuel Efficiency: Correct tire pressure can improve fuel economy, allowing you to travel further on less fuel.
- Comfort: Properly inflated tires enhance ride comfort by absorbing bumps and vibrations more effectively.
How to Check Tire Pressure
Checking your tire pressure is a straightforward process that should be done regularly. Here’s how to do it:
- Gather the Necessary Tools: You’ll need a reliable tire pressure gauge. Digital gauges are often more accurate, but analog gauges work well too.
- Check When Tires Are Cold: Measure tire pressure when the tires are cold, ideally before riding or at least three hours after riding.
- Remove Valve Caps: Unscrew the valve caps from each tire.
- Press the Gauge onto the Valve Stem: Firmly press the gauge onto the valve stem and take the reading. Make sure there’s no hissing sound; if there is, reposition the gauge and try again.
- Record the Pressure: Note the pressure reading and compare it to the recommended PSI for your specific trim.
- Replace Valve Caps: After checking, replace the valve caps to keep dirt and moisture out.
Useful Tips for Tire Maintenance
To ensure your tires remain in optimal condition, consider the following tips:
- Check Pressure Regularly: Make it a habit to check tire pressure at least once a month and before long rides.
- Inspect for Damage: Regularly examine tires for cuts, cracks, or foreign objects that may affect performance.
- Rotate Tires: If applicable, rotate tires according to the manufacturer’s recommendations to promote even wear.
- Store Properly: If you’re storing your motorcycle for an extended period, inflate tires to the recommended pressure to prevent flat spots.
- Monitor Temperature Changes: Be aware that tire pressure can fluctuate with temperature changes, so check pressure during seasonal transitions.
Maintaining proper tire pressure is essential for the safety and performance of your 2019 Harley Davidson Road Glide. Regular checks and diligent maintenance can significantly enhance your riding experience.
0 Comments