The 2019 Ford Ranger is a versatile and capable midsize pickup truck that offers a blend of performance, comfort, and utility. One of the crucial aspects of vehicle maintenance is ensuring that the tire pressure is within the recommended range. Proper tire pressure not only enhances fuel efficiency but also ensures optimal handling, safety, and tire longevity.
Understanding the specific tire pressure requirements for different trims and engine configurations is essential for owners. This information helps maintain the vehicle’s performance and safety standards. Below is a detailed table outlining the recommended tire pressure for various trims and engine options of the 2019 Ford Ranger.
2019 Ford Ranger Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| XL 2.3L EcoBoost | 30 | 2.07 | 30 | 2.07 |
| XLT 2.3L EcoBoost | 30 | 2.07 | 30 | 2.07 |
| Lariat 2.3L EcoBoost | 30 | 2.07 | 30 | 2.07 |
| XL 2.7L EcoBoost | 30 | 2.07 | 30 | 2.07 |
| XLT 2.7L EcoBoost | 30 | 2.07 | 30 | 2.07 |
| Lariat 2.7L EcoBoost | 30 | 2.07 | 30 | 2.07 |
2019 Ford Ranger Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2019 Ford Ranger is designed to alert drivers when tire pressure is too low. However, after inflating tires to the recommended pressure, you may need to reset the TPMS to turn off the warning light. Below are the steps to reset the tire pressure sensor effectively.
Steps to Reset Tire Pressure Sensor
- Ensure all tires are inflated to the recommended PSI.
- Turn the ignition to the “ON” position without starting the engine.
- Locate the TPMS reset button, usually found below the steering wheel or on the dashboard.
- Press and hold the TPMS reset button until the TPMS indicator light blinks three times, then release it.
- Start the engine and allow the vehicle to run for about 20 minutes to complete the reset process.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after following the reset procedure, it may indicate a malfunction or a need for further inspection. Here are common reasons for a flashing TPMS light:
- One or more tires may still be under-inflated.
- There could be a fault in the TPMS sensor.
- The vehicle’s battery may be low, affecting the TPMS operation.
- The system may need recalibration after a tire rotation or replacement.
TPMS Sensor Troubleshooting Table
| Issue | Possible Cause | Solution |
|---|---|---|
| TPMS light on | Low tire pressure | Inflate tires to recommended pressure |
| Flashing TPMS light | Faulty TPMS sensor | Inspect or replace the sensor |
| TPMS light stays on | Battery issue | Check and replace battery if needed |
| TPMS light after tire rotation | Need for recalibration | Follow reset procedure or consult a technician |
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. For the 2019 Ford Ranger, keeping tires inflated to the recommended PSI not only enhances fuel efficiency but also improves handling and ride comfort. Under-inflated tires can lead to increased wear and tear, reduced traction, and even blowouts. Conversely, over-inflated tires can cause a harsh ride and uneven tire wear.
Benefits of Proper Tire Pressure
- Improved fuel efficiency: Correct tire pressure reduces rolling resistance, leading to better mileage.
- Enhanced safety: Properly inflated tires provide better grip and handling, especially in adverse weather conditions.
- Longer tire life: Maintaining the right pressure helps prevent uneven wear, extending the lifespan of your tires.
- Better ride comfort: Correct tire pressure contributes to a smoother driving experience.
How to Check Tire Pressure
Checking tire pressure is a simple yet essential task that should be performed regularly, ideally once a month or before long trips. Here’s how to do it:
- Gather the necessary tools: You will need a reliable tire pressure gauge.
- Ensure tires are cold: Tire pressure should be measured when the tires are cold, ideally before driving.
- Remove the valve cap: Unscrew the valve cap from the tire you wish to check.
- Press the gauge onto the valve stem: Ensure a firm connection to get an accurate reading.
- Read the gauge: Check the PSI displayed on the gauge and compare it with the recommended pressure found in the owner’s manual or on the door jamb sticker.
- Inflate or deflate as necessary: If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air until it’s correct.
- Replace the valve cap: After checking and adjusting, make sure to securely put the valve cap back on.
Useful Tips for Maintaining Tire Pressure
- Check tire pressure at least once a month.
- Inspect tires for visible damage, such as cuts or bulges.
- Rotate tires regularly to ensure even wear.
- Keep a portable tire inflator in your vehicle for emergencies.
- Be mindful of seasonal changes, as temperature fluctuations can affect tire pressure.
By adhering to these practices, you can ensure that your 2019 Ford Ranger performs optimally and remains safe on the road. Proper tire maintenance is a small investment of time that yields significant benefits in the long run.
0 Comments