The 2019 Ford Explorer is a versatile SUV that offers a blend of power, comfort, and technology. Maintaining the correct tire pressure is crucial for ensuring optimal performance, fuel efficiency, and safety. Each trim and engine variant of the Explorer has specific tire pressure requirements that drivers must adhere to for the best driving experience.
Understanding the proper tire pressure for your vehicle is essential. This guide provides a detailed table of the recommended tire pressures for different trims and engines of the 2019 Ford Explorer. The values are presented in both PSI (pounds per square inch) and BAR for convenience.
2019 Ford Explorer Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| XLT 2.3L EcoBoost | 35 | 2.41 | 35 | 2.41 |
| Limited 2.3L EcoBoost | 35 | 2.41 | 35 | 2.41 |
| Sport 3.5L EcoBoost | 36 | 2.48 | 36 | 2.48 |
| Platinum 3.5L EcoBoost | 36 | 2.48 | 36 | 2.48 |
| Base 3.5L V6 | 35 | 2.41 | 35 | 2.41 |
2019 Ford Explorer Tire Pressure Sensor Reset
If you notice the tire pressure monitoring system (TPMS) light flashing on your 2019 Ford Explorer’s dashboard, it indicates a problem with the tire pressure sensors or the system itself. Resetting the tire pressure sensor is a straightforward process that can resolve this issue. Follow the steps below to reset the TPMS and ensure your tire pressure readings are accurate.
Steps to Reset Tire Pressure Sensor
- Check Tire Pressures: Before resetting, ensure all tires are inflated to the recommended pressure as per the tire pressure table.
- Turn On the Ignition: Insert the key and turn the ignition to the “On” position without starting the engine.
- Locate the TPMS Reset Button: This button is usually located below the steering wheel or on the dashboard. Refer to your owner’s manual if needed.
- Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times and then turns off.
- Start the Engine: Turn off the ignition, then start the engine to ensure the TPMS light is off.
Troubleshooting Flashing TPMS Light
If the TPMS light continues to flash after resetting, there may be an underlying issue. Here are some common causes:
| Issue | Possible Solution |
|---|---|
| Low Tire Pressure | Check and inflate tires to the recommended pressure. |
| Faulty Tire Pressure Sensor | Inspect and replace the faulty sensor if necessary. |
| Damaged Tires | Check for punctures or damage; repair or replace as needed. |
| Battery Issues in Sensors | Replace the battery in the tire pressure sensors if applicable. |
Additional Tips
- Regularly check tire pressure, especially before long trips.
- Ensure the TPMS is functioning correctly during routine maintenance.
- Keep a tire pressure gauge in your vehicle for quick checks.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for several reasons. It directly affects your vehicle’s handling, fuel efficiency, and overall safety. Under-inflated tires can lead to poor traction and increased tire wear, while over-inflated tires may result in a harsh ride and reduced contact with the road. Understanding the significance of proper tire pressure can help you extend the life of your tires and improve your driving experience.
Benefits of Proper Tire Pressure
- Improved Fuel Efficiency: Correct tire pressure reduces rolling resistance, which can enhance fuel economy.
- Enhanced Safety: Properly inflated tires provide better traction, reducing the risk of accidents.
- Longer Tire Life: Consistent tire pressure helps prevent uneven wear, prolonging the lifespan of your tires.
- Better Handling: Proper inflation ensures optimal handling and steering response, making for a safer ride.
How to Check Tire Pressure
Checking your tire pressure is a simple yet essential task. Here’s how to do it:
- Gather Your Tools: You’ll need a reliable tire pressure gauge. Digital gauges are often more accurate.
- Find the Recommended Pressure: Refer to the sticker on the driver’s side door jamb or your owner’s manual for the recommended PSI.
- Check When Tires Are Cold: For the most accurate reading, check tire pressure when the tires are cold, ideally before driving.
- Remove Valve Stem Caps: Unscrew the caps from the valve stems on each tire.
- Press the Gauge onto the Valve Stem: Firmly press the gauge onto the valve stem to get a reading. Make sure there’s no hissing sound, which indicates air escaping.
- Read the Pressure: Note the PSI reading on the gauge. If it’s below the recommended level, add air until it reaches the correct pressure.
- Replace Valve Caps: Always replace the valve stem caps to prevent dirt and moisture from entering.
Useful Tips for Tire Maintenance
- Check tire pressure at least once a month and before long trips.
- Inspect tires for signs of wear, such as cracks or bulges, during pressure checks.
- Rotate your tires regularly to promote even wear.
- Consider investing in a tire pressure monitoring system (TPMS) for continuous monitoring.
- Store a portable air compressor in your vehicle for emergencies.
By maintaining proper tire pressure, you not only ensure a safer driving experience but also save money on fuel and tire replacement. Regular checks and maintenance are key to getting the most out of your 2019 Ford Explorer.
0 Comments