The 2019 Ford Edge is a midsize SUV known for its comfortable ride, spacious interior, and advanced technology features. One essential aspect of vehicle maintenance that often gets overlooked is tire pressure. Maintaining the correct tire pressure is crucial for ensuring optimal performance, safety, and fuel efficiency.
Proper tire pressure varies depending on the trim and engine of the Ford Edge. Understanding the specific requirements for each variant can help owners maintain their vehicles effectively. Below is a detailed table outlining the recommended tire pressure for different trims and engines of the 2019 Ford Edge.
2019 Ford Edge Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| SE 2.0L EcoBoost | 35 | 2.41 | 35 | 2.41 |
| SEL 2.0L EcoBoost | 35 | 2.41 | 35 | 2.41 |
| Titanium 2.0L EcoBoost | 35 | 2.41 | 35 | 2.41 |
| ST 2.7L EcoBoost | 36 | 2.48 | 36 | 2.48 |
| Sport 2.7L EcoBoost | 36 | 2.48 | 36 | 2.48 |
Resetting the Tire Pressure Sensor on the 2019 Ford Edge
The tire pressure monitoring system (TPMS) in the 2019 Ford Edge is designed to alert drivers when tire pressure is too low. However, after adjusting tire pressure, the TPMS light may continue to flash or remain illuminated until the sensor is reset. Knowing how to reset this system is essential for maintaining accurate tire pressure readings and ensuring safety on the road.
Steps to Reset the Tire Pressure Sensor
- Ensure all tires are inflated to the recommended pressure as specified in the owner’s manual.
- Turn the ignition to the “On” position without starting the engine.
- Locate the TPMS reset button, typically found beneath the steering wheel or in the glove compartment.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the engine and wait for about 20 minutes for the system to recalibrate.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a malfunction in the system. Here are some common reasons for the light to flash:
| Issue | Description | Recommended Action |
|---|---|---|
| Low Tire Pressure | One or more tires are underinflated. | Check and inflate tires to the correct pressure. |
| Faulty Sensor | A sensor may be damaged or malfunctioning. | Have the sensor inspected and replaced if necessary. |
| Battery Issue | The battery in the TPMS sensor may be low. | Replace the sensor battery or the entire sensor. |
| System Malfunction | The TPMS may have a software or hardware issue. | Consult a professional technician for diagnostics. |
Additional Tips for Maintaining the TPMS
- Regularly check tire pressure, especially before long trips.
- Inspect tires for visible damage or wear.
- Replace tires that do not hold pressure properly.
- Consult the owner’s manual for specific TPMS maintenance guidelines.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is essential for the overall performance, safety, and longevity of your 2019 Ford Edge. Incorrect tire pressure can lead to various issues, including decreased fuel efficiency, uneven tire wear, and compromised handling. Moreover, under-inflated tires can overheat and increase the risk of blowouts, which can be dangerous while driving. On the other hand, over-inflated tires can result in a harsher ride and reduced traction, especially in wet conditions.
Regularly checking and maintaining the correct tire pressure not only enhances safety but also contributes to better fuel economy. Properly inflated tires provide optimal contact with the road, improving traction and control, which can lead to a smoother driving experience.
How to Check Tire Pressure
Checking the tire pressure on your Ford Edge is a straightforward process. Follow these steps to ensure your tires are at the correct pressure:
- Purchase a reliable tire pressure gauge. Digital gauges are often easier to read than analog ones.
- Ensure tires are cold, ideally checking them before driving or after the vehicle has been parked for several hours.
- Remove the valve cap from the tire you want to check.
- Press the tire pressure gauge onto the valve stem firmly to get a reading.
- Note the PSI (pounds per square inch) reading and compare it to the recommended pressure listed in your owner’s manual or on the driver’s side door jamb.
- If the pressure is too low or too high, adjust accordingly by inflating or deflating the tire.
- Replace the valve cap securely after checking.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain at the optimal pressure, consider the following tips:
- Check tire pressure at least once a month and before long trips.
- Inspect tires for signs of damage, such as cracks or bulges, which can affect tire pressure.
- Keep a portable air compressor in your vehicle for quick adjustments when needed.
- Be aware of seasonal changes; temperature fluctuations can affect tire pressure significantly (a drop of 1 PSI for every 10°F decrease in temperature).
- Rotate your tires regularly to promote even wear and extend their lifespan.
- Consider investing in a TPMS (Tire Pressure Monitoring System) if your vehicle doesn’t have one, as it provides real-time updates on tire pressure.
By following these guidelines, you can ensure that your 2019 Ford Edge maintains proper tire pressure, enhancing safety and performance while reducing the likelihood of costly repairs.
0 Comments