The 2019 Dodge Ram is a robust and versatile truck, designed to handle various driving conditions while providing comfort and performance. One critical aspect of maintaining the vehicle’s performance is ensuring that the tire pressure is within the recommended levels. Proper tire pressure not only enhances fuel efficiency but also ensures optimal handling and safety on the road.
Understanding the correct tire pressure for your specific trim and engine configuration is essential. This information helps drivers avoid issues such as tire blowouts or uneven wear. Below is a detailed table outlining the recommended tire pressure for different trims and engine options of the 2019 Dodge Ram.
2019 Dodge Ram Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Ram 1500 Tradesman | 36 | 2.48 | 36 | 2.48 |
| Ram 1500 Big Horn | 36 | 2.48 | 36 | 2.48 |
| Ram 1500 Laramie | 36 | 2.48 | 36 | 2.48 |
| Ram 1500 Rebel | 35 | 2.41 | 35 | 2.41 |
| Ram 1500 Limited | 36 | 2.48 | 36 | 2.48 |
| Ram 2500 | 80 | 5.52 | 80 | 5.52 |
| Ram 3500 | 80 | 5.52 | 80 | 5.52 |
Resetting the Tire Pressure Sensor for 2019 Dodge Ram
The Tire Pressure Monitoring System (TPMS) is a crucial feature in the 2019 Dodge Ram, designed to alert drivers when tire pressure is low. However, after inflating your tires or changing them, you may need to reset the TPMS. This process can be straightforward, but it’s essential to follow the correct steps to ensure that the system functions properly.
When the TPMS light flashes, it indicates a problem with the tire pressure sensors or that the system needs resetting. Below are the steps to reset the tire pressure sensor in your 2019 Dodge Ram.
Steps to Reset Tire Pressure Sensor
- Check Tire Pressures: Use a tire pressure gauge to ensure all tires are inflated to the recommended PSI.
- Turn on the Ignition: Insert the key and turn it to the “On” position without starting the engine.
- Locate the TPMS Reset Button: This button is usually found beneath the steering wheel or in the glove compartment.
- Press the TPMS Reset Button: Hold the button until the TPMS light blinks three times and then turns off.
- Start the Engine: Turn the key to start the engine. The TPMS light should remain off if the reset was successful.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after attempting to reset it, further investigation is necessary. Here are some common reasons why the light may flash:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may be under-inflated. Check all tires, including the spare. |
| Faulty Sensor | A sensor may be malfunctioning. This could require professional diagnosis. |
| Dead Battery in Sensor | The battery in the tire pressure sensor may be dead and needs replacement. |
| Temperature Changes | Sudden temperature changes can affect tire pressure, causing the light to flash. |
Additional Tips
- Always check tire pressure when the tires are cold for accurate readings.
- Regularly inspect the TPMS sensors during tire rotations or replacements.
- Consult your owner’s manual for specific information regarding your vehicle’s TPMS.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is essential for the overall performance, safety, and longevity of your 2019 Dodge Ram. Correct tire pressure ensures optimal contact with the road, enhancing traction and handling. Under-inflated tires can lead to increased rolling resistance, which negatively impacts fuel efficiency. Conversely, over-inflated tires can cause a harsh ride and uneven tire wear.
Additionally, improper tire pressure can significantly affect braking distance and overall vehicle stability. Tires that are not inflated to the recommended levels are more susceptible to blowouts, which can lead to dangerous situations on the road. Regularly checking and maintaining the correct tire pressure is a simple yet effective way to ensure your safety and the performance of your vehicle.
How to Check Tire Pressure
Checking tire pressure is a straightforward process that can be done with a few simple tools. Here’s how to do it:
- Gather Your Tools: You will need a reliable tire pressure gauge and an air compressor if adjustments are necessary.
- Check When Tires Are Cold: For the most accurate reading, check tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for a few hours.
- Remove Valve Caps: Unscrew the valve caps from each tire’s valve stem.
- Use the Tire Pressure Gauge: Press the tire pressure gauge onto the valve stem and hold it firmly until you get a reading. Note the PSI displayed.
- Compare with Recommended Pressure: Refer to the tire pressure table for your specific trim to see if the pressure is within the recommended range. Adjust as necessary.
- Replace Valve Caps: After checking, make sure to replace the valve caps securely to prevent dirt and moisture from entering.
Useful Tips for Tire Maintenance
Maintaining proper tire pressure is just one aspect of tire care. Here are additional tips to ensure your tires remain in optimal condition:
- Check Tire Pressure Monthly: Make it a habit to check your tire pressure at least once a month, as well as before long trips.
- Inspect Tread Depth: Regularly check the tread depth to ensure adequate traction. Use the penny test: insert a penny into the tread with Lincoln’s head down; if you can see all of his head, it’s time for new tires.
- Rotate Tires Regularly: Follow the manufacturer’s recommendations for tire rotation to promote even wear.
- Monitor for Signs of Damage: Regularly inspect tires for cuts, punctures, or bulges. Address any issues immediately.
- Be Mindful of Load Limits: Do not exceed the load capacity of your tires, as this can lead to increased wear and potential blowouts.
By following these guidelines, you can significantly enhance the performance and safety of your 2019 Dodge Ram while extending the life of your tires.
0 Comments