The 2018 Toyota Corolla is a popular compact sedan known for its reliability and efficiency. One crucial aspect of vehicle maintenance that often gets overlooked is tire pressure. Proper tire pressure is essential for optimal vehicle performance, safety, and fuel efficiency. Understanding the correct tire pressure for your specific trim and engine variant can help ensure that your Corolla runs smoothly.
Maintaining the right tire pressure not only enhances your driving experience but also prolongs the life of your tires. Under-inflated or over-inflated tires can lead to uneven wear, decreased fuel economy, and increased risk of blowouts. This article provides a detailed tire pressure table for different trims and engines of the 2018 Toyota Corolla.
2018 Toyota Corolla Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| LE | 32 | 2.2 | 32 | 2.2 |
| XLE | 32 | 2.2 | 32 | 2.2 |
| SE | 35 | 2.4 | 35 | 2.4 |
| XSE | 35 | 2.4 | 35 | 2.4 |
| LE Eco | 32 | 2.2 | 32 | 2.2 |
2018 Toyota Corolla Tire Pressure Sensor Reset
If the tire pressure monitoring system (TPMS) light is flashing on your 2018 Toyota Corolla, it indicates a potential issue with the tire pressure sensors or that the tire pressure needs to be adjusted. Resetting the tire pressure sensor is a straightforward process that can be done at home. Here’s how to do it.
Steps to Reset the Tire Pressure Sensor
- Check the Tire Pressure: Before resetting the TPMS, ensure all tires are inflated to the recommended pressure levels as indicated in the tire pressure table.
- Turn the Ignition On: Insert the key into the ignition and turn it to the “On” position without starting the engine.
- Locate the TPMS Reset Button: This button is usually found beneath the steering wheel or on the dashboard. Refer to your owner’s manual for the exact location.
- Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.
- Start the Engine: Turn the ignition off and then start the engine. The TPMS light should turn off after a few minutes of driving.
Tire Pressure Monitoring System Light Troubleshooting
If the TPMS light continues to flash after following the reset steps, consider the following:
| Issue | Possible Solution |
|---|---|
| Low Tire Pressure | Inflate the tires to the recommended PSI. |
| Faulty TPMS Sensor | Visit a mechanic to check or replace the sensor. |
| Damaged Tire | Inspect for punctures or damage and repair or replace as needed. |
| Battery Issues | Check the battery condition of the TPMS sensor. |
Common Reasons for Flashing TPMS Light
- Temperature Changes: Cold weather can decrease tire pressure, triggering the light.
- Recent Tire Rotation: If tires were rotated, the TPMS may need recalibration.
- New Tires Installed: New tires may not have sensors, or the sensors may need to be registered.
The Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for several reasons. It directly affects vehicle safety, fuel efficiency, and tire longevity. Under-inflated or over-inflated tires can lead to various problems, including poor handling, increased stopping distances, and reduced traction. By keeping tires at the recommended pressure, drivers can ensure a safer and more efficient driving experience.
Benefits of Proper Tire Pressure
- Improved Fuel Efficiency: Properly inflated tires reduce rolling resistance, which can lead to better gas mileage.
- Enhanced Safety: Correct tire pressure ensures optimal contact with the road, improving traction and handling.
- Longer Tire Life: Maintaining the right pressure helps prevent uneven tire wear, extending the lifespan of your tires.
- Better Vehicle Performance: Proper tire pressure contributes to overall vehicle stability and performance.
How to Check Tire Pressure
Checking tire pressure is a simple process that should be done regularly, ideally once a month and before long trips. Follow these steps to check the tire pressure of your 2018 Toyota Corolla:
- Gather Tools: You will need a reliable tire pressure gauge, which can be digital or analog.
- Check the Recommended Pressure: Refer to the tire pressure label located on the driver’s side door jamb for the recommended PSI.
- Remove Valve Caps: Unscrew the valve caps from each tire.
- Press the Gauge: Firmly press the tire pressure gauge onto the valve stem. Ensure a good seal to avoid air escaping.
- Read the Pressure: Note the PSI reading on the gauge. Compare it to the recommended pressure.
- Adjust Tire Pressure: If the pressure is too low, inflate the tire using an air compressor. If it’s too high, release some air until it reaches the correct level.
- Replace Valve Caps: After checking and adjusting, make sure to put the valve caps back on securely.
Useful Tips for Maintaining Tire Pressure
- Check Pressure When Cold: Tire pressure should be checked when tires are cold, ideally before driving for the day.
- Invest in a Quality Gauge: A good tire pressure gauge can provide accurate readings and help avoid mistakes.
- Monitor Changes in Weather: Temperature fluctuations can affect tire pressure; check more frequently during seasonal changes.
- Don’t Forget the Spare: Ensure your spare tire is also properly inflated, as it can be a lifesaver in emergencies.
- Regular Inspections: Include tire pressure checks in your regular vehicle maintenance routine.
0 Comments