The 2018 Subaru Crosstrek is a versatile compact SUV known for its all-wheel-drive capability and rugged design. Proper tire pressure is crucial for optimal performance, safety, and fuel efficiency. Maintaining the correct tire pressure can enhance vehicle handling and prolong tire life, making it an essential aspect of vehicle maintenance.
2018 Subaru Crosstrek Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim Level | Engine Type | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|---|
| Base | 2.0L 4-cylinder | 33 | 2.27 | 32 | 2.21 |
| Premium | 2.0L 4-cylinder | 33 | 2.27 | 32 | 2.21 |
| Limited | 2.0L 4-cylinder | 33 | 2.27 | 32 | 2.21 |
| Hybrid | 2.0L 4-cylinder + Electric | 33 | 2.27 | 32 | 2.21 |
2018 Subaru Crosstrek Tire Pressure Sensor Reset
If the tire pressure monitoring system (TPMS) light on your 2018 Subaru Crosstrek is flashing, it indicates a problem with the tire pressure sensors or that the tire pressure is significantly low. Resetting the tire pressure sensor is a straightforward process that can help restore normal function and ensure accurate readings.
Steps to Reset the Tire Pressure Sensor
- Check Tire Pressure: Before resetting, ensure all tires are inflated to the recommended pressure.
- Turn on the Ignition: Insert the key and turn the ignition to the “On” position, but do not start the engine.
- Locate the TPMS Reset Button: The reset button is typically found beneath the steering wheel or in the glove compartment.
- Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.
- Start the Engine: Start your vehicle and allow it to run for a few minutes. The TPMS light should turn off if the reset was successful.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, further investigation is necessary. Here are some common causes:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may be significantly under-inflated. |
| Faulty Sensor | A malfunctioning tire pressure sensor can cause the light to flash. |
| Battery Failure | The battery in the tire pressure sensor may be dead, requiring replacement. |
| System Malfunction | Issues with the TPMS itself can lead to incorrect readings. |
Recommendations for Maintenance
To avoid recurring issues with the TPMS, consider the following:
- Regularly check tire pressure, especially before long trips.
- Inspect tires for damage or wear that may affect pressure.
- Replace tire pressure sensors as needed, typically every 5-7 years.
- Consult a professional if the TPMS light persists after resetting.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your 2018 Subaru Crosstrek. Under-inflated or over-inflated tires can lead to a variety of issues, including decreased fuel efficiency, poor handling, and increased tire wear. Additionally, improper tire pressure can compromise safety, increasing the risk of tire blowouts and accidents.
When tires are inflated to the correct pressure, they provide optimal traction and stability. This is especially important in adverse weather conditions. Proper tire pressure also ensures even tire wear, extending the lifespan of your tires and saving you money in the long run.
How to Check Tire Pressure
Checking your tire pressure is a simple yet essential maintenance task. Follow these steps to ensure your tires are properly inflated:
- Gather Necessary Tools: You will need a reliable tire pressure gauge. Digital gauges are often easier to read than analog ones.
- Check When Tires are Cold: Tire pressure should be checked when the tires are cold, ideally before driving or after the vehicle has been parked for several hours.
- Remove Valve Cap: Unscrew the valve cap from one tire and keep it in a safe place.
- Press Gauge onto Valve Stem: Firmly press the tire pressure gauge onto the valve stem. You should hear a short hiss of air as the gauge seals against the valve.
- Read the Pressure: Check the reading on the gauge. Compare it to the recommended tire pressure listed on the driver’s side door jamb.
- Repeat for All Tires: Check the pressure in all four tires, including the spare if applicable.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain properly inflated, consider the following tips:
- Check Monthly: Make it a habit to check your tire pressure at least once a month and before long trips.
- Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes. For every 10°F drop in temperature, tire pressure decreases by about 1 PSI.
- Inspect for Damage: Regularly inspect your tires for signs of damage, such as cuts or bulges, which can affect pressure.
- Use Quality Equipment: Invest in a good tire pressure gauge for accurate readings.
- Don’t Forget the Spare: Ensure that your spare tire is also properly inflated, as it can be crucial in emergencies.
- Seek Professional Help: If you notice persistent issues with tire pressure, consult a professional to check for leaks or sensor malfunctions.
By prioritizing tire pressure maintenance, you can enhance the safety, performance, and longevity of your 2018 Subaru Crosstrek.
0 Comments