2018 Harley Davidson Tri Glide is a popular choice among motorcycle enthusiasts. Known for its stability and comfort, this three-wheeled cruiser offers a unique riding experience. However, like all vehicles, maintaining proper tire pressure is crucial for optimal performance and safety.
2018 Harley Davidson Tri Glide Tire Pressure
Recommended Tire Pressure
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Tri Glide Ultra | 36 | 2.5 | 40 | 2.8 |
| Tri Glide Ultra Classic | 36 | 2.5 | 40 | 2.8 |
| Tri Glide Standard | 36 | 2.5 | 40 | 2.8 |
Notes
Always check tire pressure when tires are cold for accurate readings. Adjustments may be necessary based on load and riding conditions.
Resetting the Tire Pressure Sensor on the 2018 Harley Davidson Tri Glide
The tire pressure monitoring system (TPMS) is essential for ensuring safe riding. When the TPMS light flashes, it indicates that the tire pressure sensor needs to be reset. This process is straightforward and can be done in a few steps.
Steps to Reset the Tire Pressure Sensor
- Ensure all tires are inflated to the recommended pressure.
- Turn on the ignition without starting the engine.
- Locate the TPMS reset button, usually found under the dashboard or near the steering wheel.
- Press and hold the TPMS reset button until the TPMS light blinks three times.
- Release the button and start the engine.
- Drive the motorcycle for about 10 minutes at speeds above 25 mph to allow the system to recalibrate.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a malfunction. Here are common causes:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may be under-inflated. |
| Faulty Sensor | The tire pressure sensor may be damaged or malfunctioning. |
| Battery Issue | The sensor battery may be dead, requiring replacement. |
Troubleshooting Tips
- Check tire pressure with a reliable gauge.
- Inspect tires for damage or leaks.
- Consult the owner’s manual for specific sensor information.
- If issues persist, seek professional assistance.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the safety and performance of your motorcycle. Under-inflated or over-inflated tires can lead to a range of issues, including decreased fuel efficiency, poor handling, and increased tire wear. For the 2018 Harley Davidson Tri Glide, keeping the tires at the recommended pressure ensures a smooth ride and optimal stability, especially given its unique three-wheeled design.
Consequences of Improper Tire Pressure
- Increased Risk of Accidents: Low tire pressure can cause reduced traction, leading to longer stopping distances and compromised handling.
- Uneven Tire Wear: Incorrect pressure can result in uneven wear patterns, shortening the lifespan of your tires.
- Poor Fuel Economy: Under-inflated tires create more rolling resistance, which can decrease your motorcycle’s fuel efficiency.
- Heat Build-Up: Over-inflated tires can lead to excessive heat build-up, increasing the risk of tire blowouts.
How to Check Tire Pressure
Checking tire pressure is a simple yet essential maintenance task. Follow these steps to ensure your tires are properly inflated:
- Gather Tools: You will need a reliable tire pressure gauge and an air compressor.
- Check When Cold: For the most accurate reading, check tire pressure when the tires are cold, ideally before riding.
- Remove Valve Cap: Unscrew the valve cap from the tire you wish to check.
- Press Gauge: Firmly press the tire pressure gauge onto the valve stem. The gauge will provide a reading of the current tire pressure.
- Compare with Recommendations: Compare the reading to the recommended tire pressure listed in the owner’s manual or on the tire placard.
- Adjust as Necessary: If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air.
- Replace Valve Cap: After checking and adjusting, replace the valve cap securely.
Useful Tips for Maintaining Tire Pressure
- Regular Checks: Check tire pressure at least once a month or before long rides.
- Visual Inspections: Regularly inspect tires for signs of damage, wear, or foreign objects.
- Temperature Effects: Be aware that tire pressure can change with temperature fluctuations. Pressure decreases in colder weather and increases in warmer weather.
- Use a Quality Gauge: Invest in a high-quality tire pressure gauge for accurate readings.
- Monitor Load: Adjust tire pressure based on the load you’re carrying, especially if you’re traveling with a passenger or additional cargo.
By keeping your tires properly inflated, you enhance your riding experience and ensure your safety on the road.
0 Comments