Correct 2018 Ford Transit Tire Pressure Maintenance

The 2018 Ford Transit is a versatile vehicle designed for various commercial and personal uses. Proper tire maintenance is crucial for ensuring optimal performance, safety, and fuel efficiency. One of the key aspects of tire maintenance is maintaining the correct tire pressure, which can vary depending on the trim and engine specifications of the vehicle.

Understanding the recommended tire pressure for your specific Ford Transit model can help prevent issues such as uneven tire wear, reduced fuel efficiency, and compromised handling. The following sections provide detailed tire pressure information for different trims and engines of the 2018 Ford Transit.

2018 Ford Transit Tire Pressure

Tire Pressure Table for Different Trim/Engine

Resetting the Tire Pressure Sensor for the 2018 Ford Transit

The tire pressure monitoring system (TPMS) is an essential feature in the 2018 Ford Transit. It alerts drivers when tire pressure is low, helping to prevent potential hazards on the road. However, after adjusting tire pressures or replacing tires, the TPMS light may remain illuminated or start flashing. This indicates that the system needs to be reset.

Understanding how to reset the tire pressure sensor can save time and ensure that the vehicle operates safely. Below are the steps to reset the TPMS light and ensure your tire pressure monitoring system is functioning correctly.

Steps to Reset the Tire Pressure Sensor

1. Check Tire Pressures: Before resetting the TPMS, ensure all tires are inflated to the recommended pressure specified in the tire pressure table.


2. Turn on the Ignition: Insert the key into the ignition and turn it to the “On” position without starting the engine.


3. Locate the TPMS Reset Button: This button is typically found under the steering wheel or on the dashboard. Refer to the owner’s manual for the exact location.


4. Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.


5. Start the Engine: Turn the ignition to the “Off” position and then start the engine. The TPMS light should turn off after a few moments.

Common Issues with TPMS Light

If the TPMS light continues to flash or remains illuminated after following the reset procedure, there may be other underlying issues. Here are some common problems:

Importance of Addressing TPMS Light Issues

Ignoring the TPMS light can lead to serious consequences. Here are some reasons to address these issues promptly:

• Improved Safety: Proper tire pressure enhances vehicle stability and handling.


• Better Fuel Efficiency: Correct tire pressure can improve fuel economy.


• Extended Tire Life: Maintaining proper tire pressure reduces wear and tear.

Maintaining Proper Tire Pressure for Optimal Performance

Proper tire pressure is crucial for the safety, performance, and longevity of your vehicle. For the 2018 Ford Transit, maintaining the correct tire pressure can significantly affect handling, fuel efficiency, and overall driving experience. Under-inflated or over-inflated tires can lead to various issues, including poor traction, increased tire wear, and a higher likelihood of blowouts.

Benefits of Maintaining Proper Tire Pressure

Keeping your tires at the recommended pressure has several advantages:

• Enhanced Safety: Properly inflated tires provide better grip and handling, reducing the risk of accidents.


• Improved Fuel Efficiency: Correct tire pressure minimizes rolling resistance, leading to better gas mileage.


• Longer Tire Life: Maintaining the right pressure helps prevent uneven wear, extending the lifespan of your tires.


• Better Ride Comfort: Proper inflation contributes to a smoother ride by absorbing shocks and vibrations more effectively.

How to Check Tire Pressure

Regularly checking your tire pressure is an essential part of vehicle maintenance. Follow these steps to ensure your tires are properly inflated:

1. Gather Your Tools: You will need a reliable tire pressure gauge. Digital gauges are easy to read, while analog gauges can be more affordable.


2. Check When Cold: Tire pressure should be checked when the tires are cold, ideally before driving or after the vehicle has been parked for a few hours.


3. Remove Valve Caps: Unscrew the valve caps from each tire and place them in a safe location to avoid losing them.


4. Press the Gauge: Firmly press the tire pressure gauge onto the valve stem. Ensure a good seal to get an accurate reading.


5. Read the Pressure: Check the gauge reading. Compare it to the recommended tire pressure listed on the driver’s side door jamb or in the owner’s manual.


6. Adjust as Necessary: If the pressure is too low, inflate the tire to the recommended level. If it’s too high, release some air until it reaches the correct pressure.


7. Replace Valve Caps: After checking and adjusting, ensure the valve caps are securely replaced to prevent dirt and moisture from entering.

Useful Tips for Maintaining Tire Pressure

Here are some additional tips to help maintain proper tire pressure:

• Check Monthly: Make it a habit to check your tire pressure at least once a month and before long trips.


• Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes. Check your tires more frequently during seasonal transitions.


• Invest in a TPMS: Consider vehicles equipped with a Tire Pressure Monitoring System (TPMS) for real-time alerts on tire pressure changes.


• Inspect for Damage: Regularly inspect tires for signs of wear, bulges, or punctures, which can affect tire pressure.

By prioritizing tire pressure maintenance, you can enhance the safety and performance of your 2018 Ford Transit, ensuring a smoother and more efficient driving experience.