Correct 2018 Ford Transit Connect Tire Pressure Guide

The 2018 Ford Transit Connect is a versatile vehicle designed for both commercial and personal use. One of the critical aspects of vehicle maintenance is ensuring that the tire pressure is at the recommended levels. Proper tire pressure not only enhances performance but also ensures safety on the road. Understanding the specific tire pressure requirements for different trims and engines is essential for optimal vehicle performance.

Maintaining the correct tire pressure can lead to better fuel efficiency, improved handling, and extended tire life. Each trim and engine configuration of the 2018 Ford Transit Connect may have different specifications for tire pressure. Below is a comprehensive table detailing the recommended tire pressure for various trims and engine options.

2018 Ford Transit Connect Tire Pressure

Tire Pressure Table for Different Trim/Engine

Resetting Tire Pressure Sensor for 2018 Ford Transit Connect

The tire pressure monitoring system (TPMS) is a crucial feature in the 2018 Ford Transit Connect. It alerts drivers when the tire pressure is too low or if there is a malfunction in the system. If the TPMS light is flashing, it indicates a potential issue that requires immediate attention. Resetting the tire pressure sensor can often resolve this issue and restore normal functionality.

How to Reset the Tire Pressure Sensor

Resetting the tire pressure sensor can be done in a few straightforward steps. Follow the instructions below to ensure that the TPMS is properly reset.

1. Check the Tire Pressure: Before resetting, ensure all tires are inflated to the recommended pressure as specified in the tire pressure table.


2. Turn on the Ignition: Insert the key into the ignition and turn it to the “on” position without starting the engine.


3. Locate the TPMS Reset Button: The reset button is usually found beneath the steering wheel or in the glove compartment.


4. Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times and then turns off.


5. Start the Engine: Turn off the ignition, then start the engine to verify that the TPMS light has turned off.

Tire Pressure Monitoring System Light Flashing

If the TPMS light continues to flash after resetting, it could indicate a deeper issue. Here are some common causes and solutions:

Tips for Maintaining the TPMS

To ensure the longevity and proper functioning of the tire pressure monitoring system, consider the following tips:

• Regularly check tire pressure at least once a month.


• Inspect the TPMS sensors during tire rotations or replacements.


• Be cautious of tire pressure changes during seasonal transitions.


• Address any TPMS warning lights immediately to avoid further complications.

Importance of Maintaining Proper Tire Pressure

Maintaining proper tire pressure is essential for the overall performance, safety, and efficiency of your vehicle. Under-inflated or over-inflated tires can lead to a range of issues, including reduced fuel efficiency, poor handling, and increased tire wear. In extreme cases, incorrect tire pressure can even result in blowouts or accidents. Understanding the significance of tire pressure can help you make informed decisions about vehicle maintenance.

Benefits of Proper Tire Pressure

Keeping your tires at the recommended pressure provides several advantages:

• Improved Fuel Efficiency: Properly inflated tires reduce rolling resistance, which can lead to better fuel economy.


• Enhanced Safety: Correct tire pressure ensures better traction and handling, reducing the likelihood of accidents.


• Longer Tire Life: Maintaining the right pressure helps prevent uneven wear, extending the life of your tires.


• Better Performance: A well-inflated tire provides optimal grip and responsiveness, enhancing overall driving experience.

How to Check Tire Pressure

Regularly checking your tire pressure is a straightforward process. Follow these steps to ensure your tires are properly inflated:

1. Gather Tools: You will need a reliable tire pressure gauge. Digital gauges are often easier to read, but manual ones work well too.


2. Check When Cold: Tire pressure should be checked when the tires are cold, preferably before driving or after the car has been parked for a few hours.


3. Remove Valve Cap: Unscrew the valve cap from the tire you wish to check.


4. Press Gauge onto Valve Stem: Firmly press the tire pressure gauge onto the valve stem to get a reading. Ensure a good seal to avoid air leaks.


5. Read the Pressure: Check the reading on the gauge. Compare it to the recommended pressure listed in your owner’s manual or on the sticker inside the driver’s door.


6. Adjust Pressure if Necessary: If the pressure is too low, inflate the tire to the recommended level. If it’s too high, release some air until it reaches the correct pressure.


7. Replace Valve Cap: After checking and adjusting, replace the valve cap to keep dirt and moisture out.

Useful Tips for Maintaining Tire Pressure

To ensure that your tires remain properly inflated, consider the following tips:

• Check Monthly: Make it a habit to check your tire pressure at least once a month.


• Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes. Check pressure more frequently during seasonal transitions.


• Inspect for Damage: Regularly inspect tires for signs of wear or damage, which can affect pressure retention.


• Use a Reliable Gauge: Invest in a quality tire pressure gauge for accurate readings.


• Don’t Forget the Spare: Check the spare tire pressure as well, as it’s often overlooked.