Correct 2018 Ford Taurus Tire Pressure Maintenance

The 2018 Ford Taurus is a full-size sedan that offers a blend of performance, comfort, and technology. Maintaining the correct tire pressure is crucial for ensuring optimal vehicle performance, safety, and fuel efficiency. Each trim and engine variant of the Taurus may have specific tire pressure requirements that owners should be aware of.

Proper tire pressure contributes to better handling, longer tire life, and improved fuel economy. Understanding the recommended tire pressure for your specific model is essential for maintaining your vehicle’s overall health. Below is a detailed table outlining the tire pressure specifications for various trims and engine options of the 2018 Ford Taurus.

2018 Ford Taurus Tire Pressure

Tire Pressure Table for Different Trim/Engine

2018 Ford Taurus Tire Pressure Sensor Reset

When the tire pressure monitoring system (TPMS) light on your 2018 Ford Taurus starts flashing, it indicates a potential issue with the tire pressure sensors. This could be due to low tire pressure, a malfunctioning sensor, or a need to reset the system. Knowing how to reset the tire pressure sensor is essential for maintaining an accurate reading and ensuring your vehicle operates safely.

Steps to Reset the Tire Pressure Sensor

1. Check the Tire Pressure: Before resetting the sensor, ensure all tires are inflated to the recommended PSI. Refer to the tire pressure table for your specific trim.


2. Turn on the Ignition: Insert the key into the ignition and turn it to the “On” position without starting the engine.


3. Locate the TPMS Reset Button: The reset button is usually found beneath the steering wheel or on the dashboard. Consult your owner’s manual if you have trouble locating it.


4. Press and Hold the Reset Button: Hold the reset button until the TPMS light blinks three times, then release it.


5. Start the Engine: Turn the ignition off and then start the engine. The TPMS light should turn off if the reset was successful.

Tire Pressure Monitoring System Light Troubleshooting

If the TPMS light continues to flash after resetting, consider the following:

Importance of Addressing TPMS Issues

Ignoring a flashing TPMS light can lead to unsafe driving conditions. Here are key reasons to address TPMS issues promptly:

• Improved Safety: Proper tire pressure enhances vehicle stability and handling.


• Increased Fuel Efficiency: Correct tire pressure can help improve fuel economy.


• Extended Tire Life: Maintaining proper pressure reduces tire wear and extends their lifespan.


• Enhanced Performance: A well-functioning TPMS ensures your vehicle performs optimally.

Importance of Maintaining Proper Tire Pressure

Maintaining the correct tire pressure is crucial for the overall performance and safety of your vehicle. Proper tire pressure affects handling, fuel efficiency, and tire longevity. Under-inflated tires can lead to decreased fuel economy, increased tire wear, and a higher risk of blowouts. Conversely, over-inflated tires can cause a harsh ride and reduce traction. Understanding the importance of tire pressure helps ensure that your 2018 Ford Taurus operates at its best.

Benefits of Proper Tire Pressure

• Enhanced Safety: Correct tire pressure improves vehicle stability and handling, reducing the likelihood of accidents.


• Fuel Efficiency: Properly inflated tires can enhance fuel economy, saving you money at the pump.


• Extended Tire Life: Maintaining the right pressure helps prevent uneven wear, extending the lifespan of your tires.


• Improved Performance: Optimal tire pressure ensures that your vehicle performs to its fullest potential, enhancing responsiveness and control.

How to Check Tire Pressure

Checking tire pressure is a straightforward task that should be done regularly, ideally once a month and before long trips. Here’s how to do it:

1. Gather Tools: You will need a reliable tire pressure gauge. Digital gauges are easy to read, while analog ones can also be effective.


2. Check When Cold: Measure tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for a few hours.


3. Remove Valve Cap: Unscrew the valve cap from the tire you want to check.


4. Press Gauge onto Valve: Firmly press the tire pressure gauge onto the valve stem. Ensure a good seal to get an accurate reading.


5. Read the Pressure: Check the gauge reading. Compare it to the recommended tire pressure found in your owner’s manual or on the driver’s side door jamb.


6. Adjust as Necessary: If the pressure is too low, add air until it reaches the recommended PSI. If it’s too high, release some air until it’s at the correct level.


7. Replace Valve Cap: After checking and adjusting, replace the valve cap securely.

Useful Tips for Tire Maintenance

To ensure your tires remain in optimal condition, consider the following tips:

• Regular Inspections: Check your tires for signs of wear, such as uneven tread wear or bulges.


• Rotate Tires: Rotate your tires every 5,000 to 7,500 miles to promote even wear.


• Alignment and Balancing: Ensure your wheels are properly aligned and balanced to prevent premature tire wear.


• Monitor Weather Changes: Be aware that temperature changes can affect tire pressure; check your tires more frequently during seasonal transitions.


• Keep a Spare Tire: Always have a properly inflated spare tire in your vehicle for emergencies.

By following these guidelines, you can maintain proper tire pressure and ensure your 2018 Ford Taurus operates safely and efficiently.