The 2018 Ford Flex is a versatile and spacious SUV that combines comfort with functionality. One of the key aspects of maintaining its performance and safety is ensuring that the tire pressure is kept within the recommended range. Proper tire pressure not only contributes to better fuel efficiency but also enhances handling and prolongs tire life.
Understanding the specific tire pressure requirements for different trims and engines of the 2018 Ford Flex is crucial for owners. Below is a detailed table outlining the recommended tire pressure settings in both PSI and BAR for various configurations of the vehicle.
2018 Ford Flex Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| SE | 35 | 2.41 | 35 | 2.41 |
| SEL | 35 | 2.41 | 35 | 2.41 |
| Limited | 35 | 2.41 | 35 | 2.41 |
| EcoBoost | 36 | 2.48 | 36 | 2.48 |
2018 Ford Flex Tire Pressure Sensor Reset
If the tire pressure monitoring system (TPMS) light is flashing on your 2018 Ford Flex, it indicates that there may be an issue with the tire pressure sensors or that the tire pressure needs to be adjusted. Resetting the tire pressure sensor is a straightforward process that can help restore the normal functioning of the TPMS. This guide outlines the steps to reset the tire pressure sensor effectively.
Steps to Reset Tire Pressure Sensor
- Check Tire Pressure: Ensure that all tires are inflated to the recommended pressure levels as specified in the owner’s manual or the tire pressure label on the driver’s side door jamb.
- Turn on the Ignition: Insert the key and turn the ignition to the “On” position without starting the engine.
- Locate the TPMS Reset Button: The reset button is usually located beneath the steering wheel or on the dashboard.
- Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.
- Start the Engine: Turn the ignition off and then start the engine to check if the TPMS light has turned off.
Troubleshooting Common Issues
If the TPMS light continues to flash after resetting, consider the following:
| Issue | Possible Solution |
|---|---|
| Improper Tire Pressure | Recheck and adjust tire pressures to the recommended levels. |
| Faulty Tire Pressure Sensor | Inspect and replace any damaged or malfunctioning sensors. |
| Battery Issues | Check and replace the battery in the tire pressure sensor if necessary. |
Additional Tips
- Regularly check tire pressure, especially before long trips.
- Consider having the TPMS inspected during routine maintenance.
- Keep a tire pressure gauge handy for quick checks.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance, safety, and longevity of your 2018 Ford Flex. Under-inflated or over-inflated tires can lead to a variety of issues, including decreased fuel efficiency, uneven tire wear, and compromised handling. In extreme cases, incorrect tire pressure can increase the risk of tire blowouts, which can result in accidents.
Proper tire pressure ensures optimal contact between the tires and the road, enhancing traction and stability. Additionally, it contributes to better fuel economy, as tires that are inflated to the correct levels reduce rolling resistance. Regularly checking and maintaining the tire pressure can save you money on fuel and extend the life of your tires.
How to Check Tire Pressure
Checking the tire pressure on your 2018 Ford Flex is a straightforward process that can be done at home or at a gas station. Follow these steps:
- Gather Tools: You will need a reliable tire pressure gauge. Digital gauges are often easier to read, but dial gauges work just as well.
- Check When Cold: Tire pressure should be checked when the tires are cold, ideally before driving or at least three hours after the vehicle has been parked.
- Remove Valve Cap: Locate the valve stem on the tire and remove the cap.
- Press Gauge onto Valve: Firmly press the tire pressure gauge onto the valve stem to get a reading. Make sure there is no hissing sound, which indicates air escaping.
- Read the Pressure: Note the pressure reading on the gauge. Compare it with the recommended pressure found in the owner’s manual or on the door jamb label.
- Replace Valve Cap: After checking, replace the valve cap to prevent dirt and moisture from entering.
Useful Tips for Tire Pressure Maintenance
To ensure your tires remain in optimal condition, consider the following tips:
- Check Monthly: Make it a habit to check your tire pressure at least once a month and before long trips.
- Adjust for Temperature: Remember that tire pressure can fluctuate with temperature changes. For every 10°F drop in temperature, tire pressure can decrease by about 1 PSI.
- Inspect for Damage: Regularly inspect your tires for any signs of damage, such as cuts, punctures, or bulges.
- Rotate Tires: Rotate your tires every 5,000 to 7,500 miles to promote even wear.
- Use a Quality Gauge: Invest in a good quality tire pressure gauge for accurate readings.
By adhering to these practices, you can ensure that your 2018 Ford Flex operates safely and efficiently, maximizing both performance and tire lifespan.
0 Comments