The 2018 Ford Explorer is a versatile SUV that combines power, comfort, and advanced technology. One critical aspect of maintaining this vehicle’s performance and safety is ensuring that the tires are inflated to the recommended pressure. Proper tire pressure not only enhances fuel efficiency but also contributes to better handling and extends tire life.
Understanding the tire pressure specifications for different trims and engines of the 2018 Ford Explorer is essential for optimal performance. Below is a comprehensive table detailing the recommended tire pressures for various configurations of this SUV.
2018 Ford Explorer Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Base Model | 35 | 2.41 | 35 | 2.41 |
| XLT | 35 | 2.41 | 35 | 2.41 |
| Limited | 36 | 2.48 | 36 | 2.48 |
| Sport | 36 | 2.48 | 36 | 2.48 |
| Platinum | 36 | 2.48 | 36 | 2.48 |
2018 Ford Explorer Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2018 Ford Explorer is designed to alert drivers when tire pressure is low. However, after inflating the tires to the recommended levels, the TPMS light may still remain illuminated or start flashing. This indicates that the sensor needs to be reset. Knowing how to perform this reset is crucial for maintaining optimal vehicle performance and safety.
Steps to Reset the Tire Pressure Sensor
- Ensure all tires are inflated to the correct pressure as specified in the user manual.
- Turn the ignition to the “On” position without starting the engine.
- Locate the TPMS reset button, usually found under the steering wheel or on the dashboard.
- Press and hold the reset button until the TPMS light blinks three times and then turns off.
- Start the engine and drive the vehicle for at least 10 minutes to allow the system to recalibrate.
Tire Pressure Monitoring System Light Flashing
If the TPMS light is flashing, this indicates a malfunction within the system. Here are the possible causes and solutions:
| Issue | Description | Solution |
|---|---|---|
| Low Tire Pressure | One or more tires are below the recommended pressure. | Check and inflate tires to the correct pressure. |
| Faulty Sensor | A tire pressure sensor may be damaged or malfunctioning. | Inspect and replace the faulty sensor as needed. |
| Battery Issue | The battery in the TPMS sensor may be low or dead. | Replace the sensor battery or the entire sensor if necessary. |
| System Malfunction | The TPMS itself may have a technical issue. | Consult a professional mechanic for diagnosis and repair. |
Additional Tips
- Regularly check tire pressure, ideally once a month.
- Use a reliable tire pressure gauge for accurate readings.
- Keep a record of tire pressure and maintenance for reference.
- Consult the owner’s manual for specific TPMS-related information.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. Under-inflated or over-inflated tires can lead to a range of issues, including reduced fuel efficiency, compromised handling, and increased tire wear. Properly inflated tires ensure optimal contact with the road, providing better traction, stability, and braking performance.
Neglecting tire pressure can also result in costly repairs and replacements. Tires that are not inflated to the recommended levels can overheat, leading to blowouts or other failures. Additionally, maintaining proper tire pressure contributes to a smoother ride, enhancing comfort for both the driver and passengers.
How to Check Tire Pressure
Checking tire pressure is a simple yet essential task that should be performed regularly. Follow these steps to ensure your tires are properly inflated:
- Gather the necessary tools: a reliable tire pressure gauge and an air compressor.
- Check tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for a few hours.
- Remove the valve cap from the tire you want to check.
- Press the tire pressure gauge onto the valve stem firmly to get a reading.
- Note the PSI reading displayed on the gauge.
- Compare the reading to the recommended tire pressure, which can be found on the driver’s side door jamb or in the owner’s manual.
- If the pressure is too low, add air using an air compressor until it reaches the recommended level. If it’s too high, release some air.
- Replace the valve cap securely after checking.
Useful Tips for Tire Pressure Maintenance
To ensure that your tires remain in optimal condition, consider the following tips:
- Check tire pressure at least once a month and before long trips.
- Inspect tires for visible signs of wear or damage, such as cracks or bulges.
- Rotate tires regularly to promote even wear and extend their lifespan.
- Be aware of seasonal changes, as temperature fluctuations can affect tire pressure. For every 10°F drop in temperature, tire pressure can decrease by about 1 PSI.
- Invest in a quality tire pressure monitoring system (TPMS) for real-time monitoring.
- Keep a portable air compressor in your vehicle for emergencies, allowing you to adjust tire pressure on the go.
By prioritizing proper tire pressure maintenance, you can enhance your vehicle’s performance, safety, and longevity. Regular checks and adjustments will not only save you money on fuel and tire replacements but also ensure a smoother driving experience.
0 Comments