Maintaining the correct tire pressure in your vehicle is crucial for optimal performance, safety, and fuel efficiency. For the 2018 Ford Edge, understanding the specific tire pressure requirements for each trim and engine type can help ensure that you are driving safely and efficiently. Proper tire pressure not only enhances handling and stability but also prolongs tire life and improves fuel economy.
The following table outlines the recommended tire pressure specifications for various trims and engine configurations of the 2018 Ford Edge. These values are expressed in both PSI (pounds per square inch) and BAR (a metric unit of pressure). Always refer to the vehicle’s owner manual or the tire placard located on the driver’s side door jamb for the most accurate information.
2018 Ford Edge Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| SE 2.5L I4 | 35 | 2.41 | 35 | 2.41 |
| SEL 2.0L I4 Turbo | 35 | 2.41 | 35 | 2.41 |
| Titanium 2.0L I4 Turbo | 35 | 2.41 | 35 | 2.41 |
| Sport 2.7L V6 | 36 | 2.48 | 36 | 2.48 |
| Sport 3.5L V6 | 36 | 2.48 | 36 | 2.48 |
Resetting Tire Pressure Sensor on 2018 Ford Edge
If the tire pressure monitoring system (TPMS) light on your 2018 Ford Edge is flashing or remains illuminated, it indicates that there is an issue with the tire pressure sensors or that the tire pressure needs adjustment. Resetting the tire pressure sensor is essential to ensure accurate readings and maintain optimal driving conditions. Here’s how to reset the TPMS on your Ford Edge.
Steps to Reset Tire Pressure Sensor
- Check Tire Pressure: Before resetting, ensure that all tires are inflated to the recommended pressure. Refer to the tire pressure table for the correct PSI.
- Turn on the Ignition: Insert the key and turn the ignition to the “On” position without starting the engine.
- Locate the TPMS Reset Button: This is usually found beneath the steering wheel or on the dashboard. Consult the owner’s manual if necessary.
- Press the TPMS Reset Button: Hold the button until the TPMS light blinks three times, then release it.
- Start the Engine: Turn the ignition to the “Off” position, then start the engine to complete the reset process.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a malfunction in the system. Take the following steps:
- Inspect for Tire Damage: Check all tires for visible damage or punctures.
- Check Tire Pressure: Ensure all tires are at the correct pressure. Re-inflate if necessary.
- Examine the TPMS Sensors: Faulty sensors may need replacement. This can be done at a dealership or qualified service center.
- Consult a Professional: If the issue persists, seek assistance from a certified mechanic for further diagnostics.
TPMS Reset Table
| Action | Description |
|---|---|
| Check Tire Pressure | Ensure all tires are inflated to the recommended PSI. |
| Turn on Ignition | Set the ignition to “On” without starting the engine. |
| Locate TPMS Reset Button | Find the reset button typically under the steering wheel. |
| Press TPMS Reset Button | Hold until the TPMS light blinks three times. |
| Start Engine | Turn the ignition off, then start the engine to finalize the reset. |
Importance of Maintaining Proper Tire Pressure
Maintaining the correct tire pressure is vital for the overall performance and safety of your vehicle. Under-inflated or over-inflated tires can lead to a variety of issues, including reduced fuel efficiency, poor handling, and increased tire wear. Moreover, incorrect tire pressure can compromise safety, increasing the risk of blowouts or accidents. Regularly checking and adjusting tire pressure ensures that your 2018 Ford Edge operates smoothly and safely.
Benefits of Proper Tire Pressure
- Improved Fuel Efficiency: Properly inflated tires reduce rolling resistance, which can enhance fuel economy.
- Enhanced Safety: Maintaining the correct pressure helps ensure optimal traction and handling, reducing the likelihood of accidents.
- Longer Tire Life: Correct tire pressure minimizes uneven wear, extending the lifespan of your tires.
- Better Performance: Properly inflated tires improve vehicle stability and responsiveness, enhancing the driving experience.
How to Check Tire Pressure
Regularly checking your tire pressure is essential for safe driving. Follow these steps to ensure accurate readings:
- Gather Tools: You will need a reliable tire pressure gauge. Digital gauges are often more accurate than manual ones.
- Check When Cold: Measure tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for a few hours.
- Remove Valve Cap: Unscrew the valve cap on the tire you want to check.
- Press Gauge on Valve Stem: Firmly press the tire pressure gauge onto the valve stem to get a reading. Make sure there’s a good seal to avoid air loss.
- Record the Reading: Note the PSI reading displayed on the gauge.
- Replace Valve Cap: After checking, replace the valve cap securely to prevent dirt from entering.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain in optimal condition, consider the following tips:
- Check Monthly: Make it a habit to check your tire pressure at least once a month and before long trips.
- Use the Right Pressure: Always refer to the manufacturer’s recommendations for the correct PSI for your specific trim.
- Inspect for Damage: Regularly check for any signs of tire wear or damage, such as cracks or bulges.
- Monitor Temperature Changes: Be aware that tire pressure can fluctuate with temperature changes, typically decreasing by 1 PSI for every 10°F drop.
- Consider Regular Rotations: Rotate your tires every 5,000 to 7,500 miles to promote even wear.
By following these guidelines, you can ensure that your 2018 Ford Edge remains safe, efficient, and enjoyable to drive.
0 Comments