The 2018 Chevy Trax is a compact SUV that combines practicality with an engaging driving experience. One of the critical aspects of vehicle maintenance is ensuring that the tire pressure is within the recommended range. Proper tire pressure not only enhances fuel efficiency but also improves handling and safety.
Maintaining the correct tire pressure is especially crucial for the Chevy Trax, as it can affect performance and longevity. Below is the detailed tire pressure information for different trims and engines of the 2018 Chevy Trax.
2018 Chevy Trax Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim Level | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| LS | 35 | 2.41 | 35 | 2.41 |
| LT | 35 | 2.41 | 35 | 2.41 |
| Premier | 35 | 2.41 | 35 | 2.41 |
| AWD | 35 | 2.41 | 35 | 2.41 |
2018 Chevy Trax Tire Pressure Sensor Reset
If the tire pressure monitoring system (TPMS) light on your 2018 Chevy Trax is flashing, it indicates that there’s an issue with the tire pressure or the sensor itself. Resetting the tire pressure sensor is a straightforward process that can be performed at home. This guide will walk you through the steps to reset the TPMS light effectively.
Steps to Reset Tire Pressure Sensor
- Check Tire Pressure: Ensure all tires are inflated to the recommended pressure as indicated in the tire pressure table.
- Turn the Ignition On: Without starting the engine, turn the ignition key to the “On” position.
- Locate the TPMS Reset Button: This button is typically found beneath the steering wheel or on the dashboard.
- Press and Hold the TPMS Reset Button: Hold the button until the TPMS light blinks three times, then release it.
- Start the Engine: Turn the ignition to the “Start” position and allow the vehicle to run for about 20 minutes. This will help the system recognize the new tire pressures.
Troubleshooting Flashing TPMS Light
If the TPMS light continues to flash after resetting, consider the following checks:
- Inspect All Tires: Look for any signs of damage or punctures.
- Check for Sensor Malfunctions: A faulty sensor may need replacement.
- Examine the Battery: Ensure the battery in the TPMS sensor is functioning properly.
- Consult a Professional: If issues persist, take the vehicle to a certified technician for a thorough inspection.
TPMS Light Behavior
The TPMS light can exhibit different behaviors based on the situation. Below is a table summarizing the meanings:
| TPMS Light Behavior | Meaning |
|---|---|
| Flashing Light | System is malfunctioning or a tire is significantly under-inflated. |
| Solid Light | One or more tires are under-inflated. |
| No Light | All tires are properly inflated and the system is functioning normally. |
Importance of Maintaining Proper Tire Pressure
Maintaining the correct tire pressure is crucial for the overall performance and safety of your 2018 Chevy Trax. Properly inflated tires contribute to better fuel efficiency, improved handling, and enhanced tire longevity. On the other hand, under-inflated or over-inflated tires can lead to various issues, including reduced traction, uneven tire wear, and even tire blowouts.
Benefits of Proper Tire Pressure
- Fuel Efficiency: Correct tire pressure helps improve gas mileage by reducing rolling resistance.
- Safety: Maintaining proper pressure ensures optimal traction, especially in adverse weather conditions.
- Tire Longevity: Proper inflation helps prevent premature wear and extends the life of your tires.
- Comfort: Correctly inflated tires provide a smoother ride, reducing vibrations and noise.
How to Check Tire Pressure
Regularly checking your tire pressure is essential for safe driving. Here’s how to do it:
- Gather Your Tools: You will need a reliable tire pressure gauge, which can be digital or manual.
- Check When Cold: Measure tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for at least three hours.
- Remove Valve Cap: Take off the valve cap from the tire you want to check.
- Press the Gauge: Firmly press the tire pressure gauge onto the valve stem to get a reading. Make sure there’s no hissing sound; if there is, reposition the gauge.
- Read the Pressure: Note the pressure reading on the gauge. Compare it with the recommended pressure found on the driver’s side door jamb or in the owner’s manual.
- Adjust as Necessary: If the pressure is too low, inflate the tire to the recommended PSI. If it’s too high, release some air until it reaches the correct level.
- Replace Valve Cap: Don’t forget to put the valve cap back on after checking.
Useful Tips for Maintaining Tire Pressure
To ensure your tires are always at the optimal pressure, consider these helpful tips:
- Check Monthly: Make it a habit to check your tire pressure at least once a month.
- Monitor Temperature Changes: Tire pressure can drop in colder weather; check pressure more frequently during seasonal changes.
- Use a Quality Gauge: Invest in a good tire pressure gauge for accurate readings.
- Inspect for Damage: Regularly look for any signs of tire damage or wear, as these can affect pressure.
- Don’t Overload: Be mindful of the vehicle’s load capacity; carrying excessive weight can affect tire pressure.
By following these guidelines, you can ensure that your 2018 Chevy Trax maintains optimal tire pressure, enhancing safety, performance, and efficiency.
0 Comments