The 2017 Toyota Yaris iA is a compact car known for its efficiency and reliability. Proper tire pressure is crucial for optimal performance, safety, and fuel efficiency. Maintaining the correct tire pressure ensures that the vehicle handles well and that tire wear is minimized, extending the life of the tires.

Understanding the specific tire pressure requirements for different trims and engine configurations is essential for every Yaris iA owner. Below is a detailed table that outlines the recommended tire pressures in both PSI and BAR for various trims of the 2017 Toyota Yaris iA.

2017 Toyota Yaris iA Tire Pressure

Tire Pressure Table for Different Trim/Engine

Trim/Engine Front Tire Pressure (PSI) Front Tire Pressure (BAR) Rear Tire Pressure (PSI) Rear Tire Pressure (BAR)
Base Model 32 2.21 30 2.07
Premium Model 32 2.21 30 2.07
Manual Transmission 32 2.21 30 2.07
Automatic Transmission 32 2.21 30 2.07

2017 Toyota Yaris iA Tire Pressure Sensor Reset

The tire pressure monitoring system (TPMS) in the 2017 Toyota Yaris iA is designed to alert drivers when tire pressure is too low. However, after adjusting tire pressure or replacing tires, the TPMS light may continue to flash. Resetting the tire pressure sensor is necessary to ensure accurate monitoring.

Steps to Reset the Tire Pressure Sensor

  1. Check all tires for the correct pressure as specified in the tire pressure table.
  2. Locate the TPMS reset button, usually found beneath the steering wheel or near the driver’s side dashboard.
  3. Turn the ignition to the “On” position without starting the engine.
  4. Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
  5. Start the vehicle and let it run for about 20 minutes to allow the system to recalibrate.

Tire Pressure Monitoring System Light Flashing

When the TPMS light is flashing, it indicates a malfunction within the system. This may be due to several reasons, including:

Possible Issue Description
Low Tire Pressure One or more tires are below the recommended pressure.
Sensor Malfunction The TPMS sensor may be damaged or malfunctioning.
Battery Issues The battery in the TPMS sensor may be dead.
Improper Installation New tires or sensors may not have been installed correctly.

What to Do If the Light Continues to Flash


  • Inspect each tire for visible damage or low pressure.

  • Check the TPMS sensor batteries if applicable.

  • Consult a professional mechanic if the issue persists.

  • Consider a diagnostic check to identify any underlying issues.

The Importance of Maintaining Proper Tire Pressure

Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. For the 2017 Toyota Yaris iA, correct tire pressure enhances fuel efficiency, improves handling, and extends tire life. Under-inflated tires can lead to increased rolling resistance, causing the engine to work harder and consume more fuel. Conversely, over-inflated tires can result in reduced traction and uneven wear, which may compromise safety.

Benefits of Proper Tire Pressure


  • Improved Fuel Efficiency: Properly inflated tires reduce drag, leading to better mileage.

  • Enhanced Vehicle Safety: Correct pressure ensures optimal traction and handling, reducing the risk of accidents.

  • Longer Tire Life: Maintaining the right pressure prevents uneven wear and extends the lifespan of your tires.

  • Increased Comfort: Proper tire pressure contributes to a smoother ride by absorbing road imperfections effectively.

How to Check Tire Pressure

Checking tire pressure is a simple process that can be done at home or at a gas station. Follow these steps to ensure accurate readings:


  1. Gather your tools: You’ll need a reliable tire pressure gauge.

  2. Ensure your tires are cold: Check the pressure before driving or at least three hours after driving.

  3. Remove the valve cap from the tire you wish to check.

  4. Press the tire pressure gauge onto the valve stem and take the reading.

  5. Compare the reading to the recommended pressure found on the driver’s side door jamb or in the owner’s manual.

  6. Replace the valve cap securely after checking.

Useful Tips for Maintaining Tire Pressure


  • Regular Checks: Inspect tire pressure at least once a month and before long trips.

  • Adjust for Temperature Changes: Tire pressure can fluctuate with temperature; check more frequently during seasonal changes.

  • Use a Quality Gauge: Invest in a good-quality tire pressure gauge for accurate readings.

  • Don’t Forget the Spare: Check your spare tire pressure to ensure it’s ready when needed.

  • Visit a Professional: If you notice persistent pressure issues, consult a mechanic to check for leaks or sensor problems.

By prioritizing tire maintenance, you can enhance the performance and longevity of your 2017 Toyota Yaris iA while ensuring a safer driving experience.

Categories: Toyota

0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *