The 2017 Toyota Highlander is a versatile and popular midsize SUV that offers a blend of comfort, style, and performance. Proper tire maintenance is crucial for ensuring optimal vehicle performance, safety, and fuel efficiency. One key aspect of tire maintenance is maintaining the correct tire pressure, which can vary based on the vehicle’s trim and engine options.
Understanding the recommended tire pressure for your specific Highlander model is essential. This information helps ensure that your tires wear evenly and perform as intended. Below is the detailed tire pressure table for the 2017 Toyota Highlander, outlining the recommended PSI and BAR for different trim and engine configurations.
2017 Toyota Highlander Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim Level | Engine Type | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|---|
| LE | 2.7L I4 | 33 | 2.27 | 32 | 2.21 |
| LE | 3.5L V6 | 33 | 2.27 | 32 | 2.21 |
| XLE | 3.5L V6 | 33 | 2.27 | 32 | 2.21 |
| Limited | 3.5L V6 | 33 | 2.27 | 32 | 2.21 |
| Platinum | 3.5L V6 | 33 | 2.27 | 32 | 2.21 |
2017 Toyota Highlander Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2017 Toyota Highlander is designed to alert you when tire pressure is too low. However, sometimes the TPMS light may flash or remain illuminated even after addressing the tire pressure issue. This can happen if the system needs to be reset. Knowing how to reset the tire pressure sensor is essential for maintaining proper tire health and ensuring your vehicle operates safely.
Steps to Reset the Tire Pressure Sensor
Resetting the tire pressure sensor in your Highlander is a straightforward process. Follow these steps to ensure the TPMS is functioning correctly:
- Check and Adjust Tire Pressure: Ensure all tires, including the spare, are inflated to the recommended PSI as indicated in the tire pressure table.
- Turn on the Ignition: Insert the key into the ignition and turn it to the “On” position without starting the engine.
- Locate the TPMS Reset Button: The reset button is usually located beneath the steering wheel or near the driver’s side dashboard.
- Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.
- Start the Engine: Turn the ignition off and then start the engine. The TPMS light should turn off after a few moments if the reset was successful.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after following the reset procedure, it may indicate a more significant issue. Here are common reasons for a flashing TPMS light:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may still be under-inflated. Check and adjust tire pressure accordingly. |
| Faulty TPMS Sensor | A malfunctioning sensor may need replacement. Consult a professional for diagnosis. |
| Battery Issues | The battery in the TPMS sensor may be dead. This typically requires sensor replacement. |
| System Malfunction | There may be an issue with the TPMS itself. A diagnostic test can help identify the problem. |
If you experience a flashing TPMS light, it’s important to address the issue promptly. Ignoring the warning could lead to unsafe driving conditions, increased tire wear, and decreased fuel efficiency. Regular maintenance and monitoring of your tire pressure can help prevent these problems.
Importance of Maintaining Proper Tire Pressure
Maintaining the correct tire pressure is crucial for the overall performance and safety of your vehicle. Properly inflated tires improve fuel efficiency, enhance handling, and extend the lifespan of your tires. Conversely, under-inflated or over-inflated tires can lead to a variety of issues, including poor traction, increased tire wear, and a higher risk of blowouts.
Benefits of Proper Tire Pressure
- Improved Fuel Efficiency: Correct tire pressure reduces rolling resistance, allowing your vehicle to use fuel more efficiently.
- Enhanced Safety: Properly inflated tires provide better traction and handling, which is vital for safe driving.
- Longer Tire Life: Maintaining the right pressure helps prevent uneven wear, extending the life of your tires.
- Better Performance: Proper tire pressure ensures optimal performance in various driving conditions, including wet or icy roads.
How to Check Tire Pressure
Checking your tire pressure is a simple yet essential task. Here’s how to do it:
- Gather Tools: You will need a reliable tire pressure gauge, which can be digital or manual.
- Check When Cold: Tire pressure should be checked when the tires are cold, ideally before driving. This gives the most accurate reading.
- Remove Valve Cap: Unscrew the valve cap from the tire you want to check.
- Press Gauge Firmly: Place the tire pressure gauge onto the valve stem and press down quickly to get a reading. Ensure it’s a firm seal to avoid air escaping.
- Read the Pressure: Note the PSI reading displayed on the gauge.
- Replace Valve Cap: After checking, don’t forget to put the valve cap back on to prevent dirt and moisture from entering.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain properly inflated, consider the following tips:
- Regular Checks: Check your tire pressure at least once a month and before long trips.
- Use a Quality Gauge: Invest in a good tire pressure gauge for accurate readings.
- Follow Manufacturer Recommendations: Always adhere to the recommended PSI listed on the driver’s side door jamb or in the owner’s manual.
- Inspect for Damage: Regularly inspect your tires for signs of wear, punctures, or damage that could affect pressure.
- Monitor Seasonal Changes: Tire pressure can fluctuate with temperature changes, so check more frequently during seasonal transitions.
By maintaining proper tire pressure, you contribute to the safety and efficiency of your 2017 Toyota Highlander. Regular monitoring and adherence to best practices will help ensure a smooth and safe driving experience.
0 Comments