Correct 2017 Subaru Tire Pressure for Safety and Efficiency

Maintaining the correct tire pressure is crucial for vehicle safety and performance. For the 2017 Subaru models, understanding the specific tire pressure requirements for each trim and engine variant is essential for optimal driving conditions. Proper tire pressure ensures better fuel efficiency, improved handling, and increased tire lifespan.

Tire pressure specifications can vary based on the trim and engine type of the vehicle. It’s important for owners to regularly check and adjust tire pressure to meet the manufacturer’s recommendations. Below is a detailed table outlining the tire pressure requirements for various 2017 Subaru models.

2017 Subaru Tire Pressure

Tire Pressure Table for Different Trim/Engine

2017 Subaru Tire Pressure Sensor Reset

When the tire pressure monitoring system (TPMS) light on your 2017 Subaru dashboard starts flashing, it indicates a potential issue with tire pressure or the TPMS itself. Knowing how to reset the tire pressure sensor is essential for ensuring that your vehicle operates safely and efficiently.

Understanding the Tire Pressure Monitoring System

The TPMS is designed to alert you when tire pressure is too low or if there is a malfunction within the system. A flashing light may suggest that the sensor needs recalibration or that the tire pressure has not been properly adjusted. Here’s how to address the issue:

Steps to Reset the Tire Pressure Sensor

1. Check Tire Pressure: Use a tire pressure gauge to measure the pressure in all tires, including the spare if applicable.


2. Adjust Tire Pressure: Inflate or deflate the tires to the recommended PSI as specified in the owner’s manual or the tire pressure label.


3. Turn on the Ignition: Insert the key and turn the ignition to the “On” position without starting the engine.


4. Locate the TPMS Reset Button: This is usually found under the steering wheel or near the dashboard.


5. Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.


6. Start the Engine: Turn the ignition off and then start the engine to see if the light has turned off.

Troubleshooting the TPMS Light

If the TPMS light continues to flash after resetting, consider the following potential issues:

Regular Maintenance Tips

To prevent issues with the tire pressure monitoring system, consider the following maintenance tips:

• Regularly check tire pressure, especially before long trips.


• Inspect tires for wear and damage.


• Rotate tires according to the manufacturer’s recommendations.


• Replace TPMS sensors as recommended, typically every 5-7 years.

Importance of Maintaining Proper Tire Pressure

Maintaining proper tire pressure is critical for the overall safety and performance of your vehicle. Under-inflated tires can lead to decreased fuel efficiency, poor handling, and increased tire wear. Conversely, over-inflated tires can result in a harsher ride and reduced traction, especially in adverse weather conditions. Understanding the significance of tire pressure is essential for every vehicle owner.

Why Proper Tire Pressure Matters

• Safety: Correct tire pressure ensures optimal contact with the road, reducing the risk of blowouts and improving overall vehicle control.
• Fuel Efficiency: Tires that are properly inflated can enhance fuel economy by reducing rolling resistance, saving you money at the pump.
• Tire Longevity: Maintaining the right pressure extends the life of your tires, preventing premature wear and the need for replacements.
• Environmental Impact: Better fuel efficiency results in lower carbon emissions, contributing to a healthier environment.

How to Check Tire Pressure

Checking tire pressure is a simple process that requires minimal tools. Here’s how to do it effectively:

1. Gather Tools: You will need a reliable tire pressure gauge. Digital gauges are often more accurate than manual ones.
2. Check When Cold: Measure tire pressure when the tires are cold, ideally before driving or at least three hours after driving.
3. Remove Valve Cap: Unscrew the valve cap from the tire you want to check.
4. Press Gauge on Valve: Firmly press the tire pressure gauge onto the valve stem and hold it in place until you hear a hissing sound stop.
5. Read Pressure: Check the reading on the gauge. Compare it to the recommended PSI listed on the driver’s side door jamb or in the owner’s manual.
6. Adjust as Needed: If the pressure is too low, inflate the tire to the recommended level. If it’s too high, release some air until it reaches the correct PSI.
7. Replace Valve Cap: After checking, replace the valve cap securely to prevent dirt and moisture from entering.

Useful Tips for Tire Maintenance

To ensure your tires remain in optimal condition, consider the following tips:

• Regular Checks: Check tire pressure at least once a month and before long trips.
• Visual Inspections: Regularly inspect tires for signs of damage, such as cracks, bulges, or foreign objects.
• Rotate Tires: Follow the manufacturer’s recommendations for tire rotation to promote even wear.
• Alignment and Balancing: Ensure that your wheels are properly aligned and balanced to prevent uneven wear.
• Seasonal Adjustments: Be mindful of seasonal changes, as temperature fluctuations can affect tire pressure.

By regularly checking and maintaining proper tire pressure, you ensure a safer and more efficient driving experience.