The 2017 Subaru Outback is a versatile vehicle known for its reliability and performance in various driving conditions. One of the critical aspects of maintaining this vehicle is ensuring that the tire pressure is at the recommended levels. Proper tire pressure not only enhances fuel efficiency but also improves handling and safety on the road.
Understanding the specific tire pressure requirements for different trims and engines of the 2017 Outback is essential for every owner. This information helps in optimizing the vehicle’s performance and prolonging the lifespan of the tires. Below is a detailed table of the recommended tire pressure for various trim levels and engine configurations of the 2017 Subaru Outback.
2017 Subaru Outback Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim Level | Engine Type | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|---|
| 2.5i | 2.5L 4-Cylinder | 32 | 2.2 | 32 | 2.2 |
| 2.5i Premium | 2.5L 4-Cylinder | 32 | 2.2 | 32 | 2.2 |
| 2.5i Limited | 2.5L 4-Cylinder | 32 | 2.2 | 32 | 2.2 |
| 3.6R Limited | 3.6L 6-Cylinder | 30 | 2.1 | 30 | 2.1 |
| 3.6R Touring | 3.6L 6-Cylinder | 30 | 2.1 | 30 | 2.1 |
2017 Subaru Outback Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2017 Subaru Outback is designed to alert drivers when tire pressure is low. However, sometimes the TPMS light can flash or remain illuminated even after correcting the tire pressure. This can indicate that the system needs to be reset. Knowing how to reset the tire pressure sensor is crucial for ensuring that the TPMS functions correctly.
Steps to Reset the Tire Pressure Sensor
Resetting the tire pressure sensor is a straightforward process. Follow these steps to ensure your TPMS is functioning as intended:
- Check and adjust the tire pressures to the recommended levels as specified in the owner’s manual.
- Turn the ignition to the “ON” position without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering wheel or on the dashboard.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release the button.
- Start the engine and drive for a few minutes to allow the system to recalibrate.
Tire Pressure Monitoring System Light Flashing
If the tire pressure monitoring system light continues to flash after resetting, it may indicate a more serious issue. Here are some common reasons for a flashing TPMS light:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may still be under-inflated. Check all tires and adjust pressure as needed. |
| Faulty Sensor | A malfunctioning tire pressure sensor may need replacement. Inspect each sensor for damage. |
| Battery Issues | The battery in one of the tire sensors may be dead. This typically requires sensor replacement. |
| System Malfunction | There may be a problem with the TPMS itself. A diagnostic scan may be necessary to identify the issue. |
When to Seek Professional Help
If you’ve followed the reset procedure and the TPMS light remains on or continues to flash, it may be time to consult a professional. Consider the following:
- If you’re unsure about checking tire pressures or sensors, a professional can provide assistance.
- If tire pressures are correct but the light persists, a mechanic can diagnose potential sensor or system issues.
- Regular maintenance checks can help identify problems before they escalate.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. For the 2017 Subaru Outback, keeping the tires inflated to the recommended levels can lead to numerous benefits. Under-inflated or over-inflated tires can significantly affect handling, fuel efficiency, and tire longevity.
Benefits of Proper Tire Pressure
- Improved Fuel Efficiency: Properly inflated tires reduce rolling resistance, leading to better fuel economy.
- Enhanced Safety: Correct tire pressure improves vehicle handling and stability, reducing the risk of accidents.
- Longer Tire Life: Maintaining the right pressure helps prevent uneven tire wear, extending the lifespan of your tires.
- Better Performance: Proper inflation ensures optimal traction and braking performance in various driving conditions.
How to Check Tire Pressure
Checking tire pressure is a simple yet essential task that should be performed regularly. Here’s how to do it:
- Gather Necessary Tools: You will need a reliable tire pressure gauge and, if necessary, an air compressor.
- Check Tire Temperature: Ensure tires are cold, as driving can temporarily increase pressure readings.
- Remove Valve Caps: Unscrew the valve caps from each tire’s valve stem.
- Insert Tire Pressure Gauge: Press the gauge onto the valve stem firmly to get a reading.
- Read the Pressure: Note the PSI reading on the gauge and compare it to the recommended pressure listed on the driver’s side door jamb.
- Adjust as Necessary: If the pressure is too low, use an air compressor to inflate the tire. If it’s too high, release some air until it reaches the recommended level.
- Replace Valve Caps: After checking and adjusting the tire pressure, make sure to replace the valve caps securely.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain at the correct pressure, consider the following tips:
- Regular Checks: Check tire pressure at least once a month and before long trips.
- Monitor Weather Changes: Temperature fluctuations can affect tire pressure; check more frequently during extreme weather.
- Use a Quality Gauge: Invest in a reliable tire pressure gauge for accurate readings.
- Stay Informed: Familiarize yourself with the recommended tire pressure for your specific Outback trim.
- Inspect Tires: Regularly inspect tires for signs of damage or wear, which can also influence pressure.
0 Comments