Maintaining the correct tire pressure is crucial for the performance and safety of your vehicle. For the 2017 Subaru Impreza, understanding the specific tire pressure requirements for different trims and engines can enhance driving stability, fuel efficiency, and tire longevity. This information is essential for both new and experienced drivers to ensure optimal vehicle operation.
The recommended tire pressure can vary based on the trim level and engine type of the 2017 Subaru Impreza. It is important to regularly check and maintain the tire pressure to avoid issues such as poor handling, increased tire wear, and reduced fuel efficiency. Below is a detailed table outlining the tire pressure specifications for various trims and engines of the 2017 Subaru Impreza.
2017 Subaru Impreza Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Base Model | 32 | 2.2 | 32 | 2.2 |
| Premium Model | 32 | 2.2 | 32 | 2.2 |
| Sport Model | 33 | 2.3 | 32 | 2.2 |
| Limited Model | 32 | 2.2 | 32 | 2.2 |
| 5-Door Model | 32 | 2.2 | 32 | 2.2 |
2017 Subaru Impreza Tire Pressure Sensor Reset
When the tire pressure monitoring system (TPMS) light is flashing on your 2017 Subaru Impreza, it indicates that there is an issue with the tire pressure sensors. This could be due to low tire pressure, a malfunctioning sensor, or even a need for recalibration. Knowing how to reset the tire pressure sensor is essential for ensuring the system functions correctly and that you are alerted to any tire pressure issues.
Steps to Reset the Tire Pressure Sensor
To reset the tire pressure sensor in your 2017 Subaru Impreza, follow these steps:
- Check the Tire Pressure: Ensure all tires are inflated to the recommended pressure as specified in the owner’s manual.
- Turn on the Ignition: Insert the key and turn it to the “ON” position without starting the engine.
- Locate the TPMS Reset Button: This is usually located beneath the steering wheel or on the dashboard. Consult your owner’s manual for the exact location.
- Press and Hold the Reset Button: Hold the reset button until the TPMS light blinks three times, then release it.
- Start the Engine: Turn the ignition to the “OFF” position and then start the engine. The TPMS light should turn off after a few seconds.
Tire Pressure Monitoring System Light Troubleshooting
If the TPMS light continues to flash after resetting, consider the following troubleshooting tips:
- Inspect Tires for Damage: Check for any punctures, cuts, or other visible damage.
- Check for Sensor Malfunction: A malfunctioning sensor may need replacement. Consult a professional if you suspect this is the case.
- Verify Tire Pressure: Ensure all tires are properly inflated, including the spare tire if equipped with a sensor.
- Recalibrate the System: In some cases, the system may require recalibration. Refer to your owner’s manual for specific instructions.
Tire Pressure Sensor Reset Table
| Condition | Action Required |
|---|---|
| TPMS Light Blinking | Check tire pressure and reset sensor |
| TPMS Light Solid | Inspect for tire damage or sensor issues |
| TPMS Light Off After Reset | No action needed; monitor tire pressure |
| TPMS Light Remains On | Consult a professional for sensor replacement |
Importance of Maintaining Proper Tire Pressure
Maintaining the correct tire pressure is essential for the overall safety and performance of your vehicle. Properly inflated tires ensure better handling, improved fuel efficiency, and extended tire life. Under-inflated tires can lead to increased rolling resistance, which not only decreases fuel economy but also raises the risk of tire blowouts. Conversely, over-inflated tires can cause reduced traction and uneven tire wear.
Benefits of Proper Tire Pressure
- Enhanced Safety: Correct tire pressure reduces the risk of accidents caused by tire blowouts or loss of control.
- Improved Fuel Efficiency: Properly inflated tires can improve gas mileage, saving you money at the pump.
- Longer Tire Life: Maintaining the right pressure helps prevent uneven wear, extending the lifespan of your tires.
- Better Handling: Proper tire pressure ensures optimal contact with the road, improving overall driving stability and handling.
How to Check Tire Pressure
Regularly checking your tire pressure is crucial for maintaining optimal performance. Follow these steps to check the tire pressure of your 2017 Subaru Impreza:
- Gather Necessary Tools: You will need a reliable tire pressure gauge and an air compressor if adjustments are needed.
- Check Tire Pressure When Cold: For the most accurate reading, check tire pressure when the tires are cold, ideally before driving or at least three hours after driving.
- Remove Valve Cap: Unscrew the valve cap from the tire’s valve stem.
- Use the Tire Pressure Gauge: Press the gauge onto the valve stem firmly to get a reading. Note the PSI displayed on the gauge.
- Compare with Recommended Pressure: Check the recommended tire pressure for your specific trim, which can be found on the driver’s side door jamb or in the owner’s manual.
- Adjust Pressure if Necessary: If the pressure is too low, use an air compressor to inflate the tire to the recommended PSI. If it’s too high, release some air until it reaches the correct level.
- Replace Valve Cap: After checking and adjusting the pressure, replace the valve cap securely.
Useful Tips for Maintaining Tire Pressure
- Check Regularly: Aim to check your tire pressure at least once a month and before long trips.
- Inspect Tires for Damage: Regularly inspect your tires for any signs of wear, punctures, or other damage that could affect pressure.
- Monitor Temperature Changes: Tire pressure can drop in colder weather; check your tires more frequently during seasonal changes.
- Use a Quality Gauge: Invest in a good-quality tire pressure gauge for accurate readings.
- Don’t Forget the Spare: If your vehicle has a spare tire with a pressure sensor, check its pressure regularly as well.
0 Comments