Correct 2017 Subaru Forester Tire Pressure Guide

The 2017 Subaru Forester is a versatile compact SUV that offers a blend of comfort, utility, and performance. One of the critical aspects of maintaining the vehicle’s performance and safety is ensuring that the tire pressure is within the recommended range. Proper tire pressure not only enhances fuel efficiency but also improves handling and prolongs tire life.

Understanding the correct tire pressure specifications for different trim levels and engine types is essential for every Forester owner. This information helps ensure optimal performance and safety on the road. Below, you will find detailed tables outlining the recommended tire pressures for various trims and engines of the 2017 Subaru Forester.

2017 Subaru Forester Tire Pressure

Tire Pressure Table for Different Trim/Engine

2017 Subaru Forester Tire Pressure Sensor Reset

When the tire pressure monitoring system (TPMS) light on your 2017 Subaru Forester starts flashing, it indicates that there is an issue with the tire pressure sensors or that the tire pressures are not within the recommended range. It’s crucial to address this promptly to ensure safety and optimal vehicle performance. Resetting the tire pressure sensor can often resolve the issue, allowing the system to accurately monitor tire pressures.

Steps to Reset the Tire Pressure Sensor

Follow these steps to reset the tire pressure sensor in your Subaru Forester:

1. Check the Tire Pressures:
   
   
   
   • Ensure all tires are inflated to the recommended pressure as listed in the owner’s manual or on the driver’s side door jamb.
   
   
   
   


2. Turn the Ignition On:
   
   
   
   • Do not start the engine; just turn the key to the “ON” position.
   
   
   
   


3. Locate the TPMS Reset Button:
   
   
   
   • The reset button is usually located beneath the steering wheel or near the fuse box.
   
   
   
   


4. Press and Hold the Reset Button:
   
   
   
   • Hold the button until the TPMS light blinks three times, then release it.
   
   
   
   


5. Start the Engine:
   
   
   
   • Turn the ignition off and then start the engine. The TPMS light should go off after a few moments.
   
   
   
   

Tire Pressure Monitoring System Light Flashing

If the TPMS light continues to flash after resetting, it may indicate a more serious issue. Below is a table summarizing potential causes and solutions:

By following these steps and understanding the implications of a flashing TPMS light, you can maintain the safety and performance of your 2017 Subaru Forester. Regular checks and timely resets will help ensure that your vehicle remains in optimal condition.

Maintaining Proper Tire Pressure

Proper tire pressure is crucial for the safety, performance, and longevity of your vehicle. For the 2017 Subaru Forester, maintaining the correct tire pressure can significantly impact handling, fuel efficiency, and tire wear. Under-inflated tires can lead to poor handling, increased stopping distances, and reduced fuel economy. Conversely, over-inflated tires may cause a harsher ride and increased risk of tire blowouts.

Importance of Maintaining Proper Tire Pressure

Here are several reasons why keeping your tire pressure in check is essential:

• Safety: Properly inflated tires provide better traction and handling, reducing the risk of accidents.


• Fuel Efficiency: Correct tire pressure can improve fuel economy, saving you money at the pump.


• Tire Longevity: Maintaining the recommended pressure extends the life of your tires, preventing premature wear.


• Environmental Impact: Improved fuel efficiency leads to lower emissions, contributing to a healthier environment.

How to Check Tire Pressure

Checking the tire pressure on your Subaru Forester is a straightforward process that should be done regularly, ideally once a month and before long trips. Follow these steps:

1. Gather Your Tools: You will need a reliable tire pressure gauge. Digital gauges are often more accurate than analog ones.


2. Check When Cold: Measure tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for a few hours.


3. Remove Valve Caps: Unscrew the valve caps on each tire and set them aside in a safe place.


4. Press the Gauge: Firmly press the tire pressure gauge onto the valve stem. Ensure a good seal to get an accurate reading.


5. Read the Pressure: Check the reading on the gauge and compare it to the recommended tire pressure found in the owner’s manual or on the driver’s side door jamb.


6. Adjust as Necessary: If the pressure is too low, inflate the tire to the correct PSI. If it’s too high, release some air until it reaches the recommended level.


7. Replace Valve Caps: Once you’re done, screw the valve caps back on securely.

Useful Tips for Tire Pressure Maintenance

To help maintain proper tire pressure and ensure optimal performance, consider the following tips:

• Invest in a Quality Gauge: A good tire pressure gauge can provide accurate readings and help you monitor tire pressure effectively.


• Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes. Check pressures during seasonal transitions.


• Rotate Tires Regularly: Rotating your tires can help ensure even wear and maintain proper pressure over time.


• Inspect Tires for Damage: Regularly check for punctures, cuts, or other damage that could affect tire pressure.


• Stay Informed: Be aware of any warning lights on your dashboard, including the TPMS light, and address them promptly.

By prioritizing tire pressure maintenance, you can enhance the performance, safety, and efficiency of your 2017 Subaru Forester. Regular checks and adjustments will contribute to a smoother, safer driving experience.