The 2017 Subaru Crosstrek is a versatile compact SUV that combines ruggedness with everyday practicality. It is essential for owners to maintain the correct tire pressure to ensure optimal performance, safety, and fuel efficiency. Proper tire pressure not only enhances the vehicle’s handling but also prolongs tire life, making it a critical aspect of vehicle maintenance.
Maintaining the right tire pressure is crucial for the 2017 Subaru Crosstrek, as it affects various driving dynamics. The recommended tire pressure can vary based on the specific trim and engine type of the vehicle. Below is a detailed table outlining the recommended tire pressures for different trims of the 2017 Subaru Crosstrek.
2017 Subaru Crosstrek Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Base | 30 | 2.07 | 30 | 2.07 |
| Premium | 30 | 2.07 | 30 | 2.07 |
| Limited | 30 | 2.07 | 30 | 2.07 |
| Hybrid | 30 | 2.07 | 30 | 2.07 |
Resetting Tire Pressure Sensor for 2017 Subaru Crosstrek
The tire pressure monitoring system (TPMS) in the 2017 Subaru Crosstrek is designed to alert drivers when tire pressure is low. However, sometimes the TPMS light may flash or remain illuminated even after correcting the tire pressure. This indicates that the system needs to be reset. Knowing how to reset the tire pressure sensor is essential for maintaining accurate tire pressure readings and ensuring safe driving.
Steps to Reset the Tire Pressure Sensor
Follow these steps to reset the tire pressure sensor in your 2017 Subaru Crosstrek:
- Ensure all tires are inflated to the recommended pressure.
- Turn the ignition switch to the “ON” position without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering wheel.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the engine and wait for a few minutes; the TPMS light should turn off.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash, it may indicate a malfunction in the system. Here are some common causes:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires are under-inflated. |
| Faulty Sensor | A tire pressure sensor may be damaged or malfunctioning. |
| Battery Issue | The battery in the tire pressure sensor may need replacement. |
| System Malfunction | The TPMS may have an internal issue requiring professional diagnostics. |
What to Do If the Light Remains On
If the TPMS light remains on after attempting to reset it, consider the following actions:
- Check all tire pressures again to ensure they are at the recommended levels.
- Inspect the tires for any visible damage or punctures.
- Consult the vehicle’s owner manual for additional troubleshooting steps.
- Visit a qualified mechanic or Subaru dealership for diagnostics.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the safety and performance of the 2017 Subaru Crosstrek. Incorrect tire pressure can lead to a variety of issues, including reduced fuel efficiency, uneven tire wear, and compromised handling. Moreover, driving on under-inflated or over-inflated tires increases the risk of tire blowouts, which can result in dangerous situations on the road.
Proper tire pressure ensures that the tires make optimal contact with the road surface, enhancing traction and stability. This is particularly important for an SUV like the Crosstrek, which is often driven in varied conditions. Regularly checking and adjusting tire pressure can also extend the lifespan of the tires, saving you money in the long run.
How to Check Tire Pressure
Checking tire pressure is a straightforward process that can be done at home or at a service station. Here’s how to do it:
- Purchase a reliable tire pressure gauge if you don’t already have one.
- Ensure the tires are cold; it’s best to check them before driving or after the vehicle has been parked for a few hours.
- Remove the valve cap from the tire you wish to check.
- Press the tire pressure gauge onto the valve stem firmly to get a reading.
- Note the pressure displayed on the gauge and compare it to the recommended tire pressure for your Crosstrek.
- Replace the valve cap securely after checking.
Useful Tips for Maintaining Tire Pressure
To keep your tire pressure in check and ensure optimal performance, consider the following tips:
- Check tire pressure at least once a month and before long trips.
- Always refer to the owner’s manual or the sticker inside the driver’s door for the correct tire pressure specifications.
- Inspect tires regularly for signs of wear, damage, or punctures.
- Consider investing in a TPMS (Tire Pressure Monitoring System) if your vehicle doesn’t have one. This system alerts you when tire pressure is low.
- Keep a portable air compressor in your vehicle for quick adjustments on the go.
- Rotate your tires regularly to ensure even wear and maintain proper pressure across all tires.
By consistently monitoring and maintaining the proper tire pressure, you can enhance the safety, efficiency, and longevity of your 2017 Subaru Crosstrek.
0 Comments