The 2017 Kia Sorento is a versatile midsize SUV that combines comfort, performance, and practicality. Proper maintenance of this vehicle is essential for ensuring safety and optimal performance on the road. One of the critical aspects of vehicle maintenance is monitoring and maintaining the correct tire pressure, which can significantly impact fuel efficiency, handling, and tire longevity.
Understanding the specific tire pressure requirements for different trims and engines of the 2017 Kia Sorento is vital. This information helps owners keep their vehicles in top condition, ensuring a smooth driving experience. Below is a detailed table outlining the recommended tire pressure for various trims and engine configurations of the 2017 Kia Sorento.
2017 Kia Sorento Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| LX 2.4L | 33 | 2.3 | 33 | 2.3 |
| EX 2.0L Turbo | 36 | 2.5 | 36 | 2.5 |
| SX 3.3L V6 | 35 | 2.4 | 35 | 2.4 |
| SXL 3.3L V6 | 35 | 2.4 | 35 | 2.4 |
| AWD Models | 33 | 2.3 | 33 | 2.3 |
2017 Kia Sorento Tire Pressure Sensor Reset
When the tire pressure monitoring system (TPMS) light on your 2017 Kia Sorento flashes, it indicates that there may be an issue with the tire pressure or the TPMS itself. Resetting the tire pressure sensor is crucial to ensure accurate readings and maintain vehicle safety. This process can be straightforward, but it’s essential to follow the correct steps.
Steps to Reset the Tire Pressure Sensor
- Check the Tire Pressure:
- Before resetting, ensure all tires are inflated to the recommended pressure.
- Refer to the tire pressure table for appropriate PSI and BAR levels.
- Turn on the Ignition:
- Insert the key into the ignition and turn it to the “ON” position without starting the engine.
- Locate the TPMS Reset Button:
- The reset button is usually located beneath the steering wheel or near the fuse box.
- Press and Hold the Reset Button:
- Hold the button until the TPMS light blinks three times, then release it.
- Start the Engine:
- Start the engine and let it run for a few minutes to allow the system to recalibrate.
- Check the TPMS Light:
- If the TPMS light turns off, the reset was successful. If it remains on, repeat the process or consult a professional.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a malfunction within the system. Here are some common reasons for a flashing light:
| Issue | Description | Solution |
|---|---|---|
| Low Tire Pressure | One or more tires are under-inflated. | Check and inflate tires to the recommended pressure. |
| Faulty TPMS Sensor | A sensor may be damaged or malfunctioning. | Inspect sensors and replace if necessary. |
| Dead Battery in Sensor | The battery in the TPMS sensor may be depleted. | Replace the sensor battery or the entire sensor. |
| TPMS System Malfunction | There may be a fault in the TPMS system itself. | Consult a certified technician for diagnosis and repair. |
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. Under-inflated or over-inflated tires can lead to a range of issues, including decreased fuel efficiency, uneven tire wear, and compromised handling. Understanding the importance of tire pressure can help you avoid these problems and enhance your driving experience.
Benefits of Proper Tire Pressure
- Improved Fuel Efficiency: Correct tire pressure reduces rolling resistance, which can lead to better gas mileage.
- Enhanced Safety: Properly inflated tires provide better traction and handling, reducing the risk of accidents.
- Extended Tire Life: Maintaining the right pressure helps prevent premature tire wear, saving you money on replacements.
- Better Ride Comfort: Proper inflation levels contribute to a smoother ride by absorbing road imperfections.
How to Check Tire Pressure
Regularly checking your tire pressure is an essential part of vehicle maintenance. Here’s how to do it effectively:
Steps to Check Tire Pressure
- Gather Necessary Tools: You’ll need a reliable tire pressure gauge and possibly an air compressor.
- Check Tire Temperature: Ensure tires are cold for an accurate reading. Wait at least three hours after driving.
- Remove Valve Cap: Unscrew the valve cap from the tire you want to check.
- Insert Tire Pressure Gauge: Press the gauge onto the valve stem until you hear a hissing sound, indicating air is escaping.
- Read the Gauge: Check the reading on the gauge and compare it to the recommended PSI from the vehicle’s manual or the sticker inside the driver’s door.
- Adjust Pressure if Necessary: If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air.
- Replace Valve Cap: After checking and adjusting the pressure, screw the valve cap back on securely.
Useful Tips for Tire Maintenance
To ensure your tires remain in optimal condition, consider the following tips:
Regular Inspections
- Check tire pressure at least once a month and before long trips.
- Inspect tires for signs of wear, such as cracks, bulges, or uneven tread.
Seasonal Adjustments
- Adjust tire pressure with changing temperatures, as pressure can drop in colder weather.
- Consider switching to winter tires if you live in an area with harsh winter conditions.
Professional Assistance
- Have your tires rotated and balanced regularly to promote even wear.
- Consult a professional if you suspect any issues with your tires or TPMS.
By maintaining proper tire pressure and following these guidelines, you can enhance the safety, efficiency, and longevity of your 2017 Kia Sorento.
0 Comments