The 2017 Hyundai Veloster is a unique and sporty hatchback that combines style with performance. One of the critical aspects of maintaining this vehicle’s performance and safety is ensuring that the tire pressure is at the recommended levels. Proper tire pressure not only enhances fuel efficiency but also ensures optimal handling and extends the lifespan of the tires.
Understanding the correct tire pressure for different trims and engines of the 2017 Veloster is essential for any owner. This information can help you avoid potential issues related to under-inflation or over-inflation, which can lead to uneven tire wear and compromised vehicle safety.
2017 Hyundai Veloster Tire Pressure
Tire Pressure Specifications
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Base Model | 32 | 2.2 | 30 | 2.1 |
| Turbo R-Spec | 32 | 2.2 | 30 | 2.1 |
| Turbo Ultimate | 32 | 2.2 | 30 | 2.1 |
| Veloster N | 36 | 2.5 | 36 | 2.5 |
2017 Hyundai Veloster Tire Pressure Sensor Reset
When the tire pressure monitoring system (TPMS) light on your 2017 Hyundai Veloster starts flashing, it indicates that there’s an issue with the tire pressure or the system itself. Resetting the tire pressure sensor is essential to ensure accurate readings and proper vehicle performance. This process can often be done quickly and easily by following a few steps.
Steps to Reset Tire Pressure Sensor
- Check Tire Pressures: Before resetting the sensor, ensure all tires are inflated to the recommended pressure levels as indicated in the tire pressure table.
- Turn on the Ignition: Insert the key into the ignition and turn it to the “ON” position without starting the engine.
- Locate the TPMS Reset Button: The reset button is typically located beneath the steering wheel or near the fuse box.
- Press and Hold the Reset Button: Hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the Engine: Turn off the ignition and start the engine to check if the TPMS light has turned off.
Tire Pressure Monitoring System Light Troubleshooting
If the TPMS light continues to flash or remains illuminated after resetting, further investigation may be required. Here are some common issues to consider:
| Issue | Possible Cause | Solution |
|---|---|---|
| TPMS Light Blinking | Low Tire Pressure | Check and inflate tires to recommended pressure. |
| TPMS Light On | Faulty Sensor | Inspect or replace the tire pressure sensor. |
| TPMS Light On After Reset | Improper Reset Procedure | Repeat the reset process carefully. |
| TPMS Light Flashing After Driving | Temperature Changes | Check tire pressure again, especially in cold weather. |
Additional Tips
- Regularly check tire pressures, especially before long trips.
- Be aware of temperature changes that can affect tire pressure.
- Consult your owner’s manual for specific information regarding your vehicle’s TPMS.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your 2017 Hyundai Veloster. Properly inflated tires provide better traction, improve fuel efficiency, and enhance the vehicle’s handling characteristics. On the other hand, under-inflated or over-inflated tires can lead to a range of issues, including uneven tire wear, reduced fuel economy, and compromised safety during driving.
Additionally, tires that are not inflated to the recommended levels can increase the risk of blowouts and accidents. Regularly checking and maintaining the correct tire pressure can also prolong the lifespan of your tires, saving you money in the long run.
How to Check Tire Pressure
Checking the tire pressure on your Veloster is a straightforward process. Here are the steps to follow:
- Gather Your Tools: You will need a tire pressure gauge, which can be digital or manual.
- Ensure Tires Are Cold: For the most accurate reading, check the tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for a few hours.
- Remove Valve Cap: Locate the valve stem on each tire and remove the valve cap.
- Use the Tire Pressure Gauge: Press the gauge onto the valve stem firmly to get a reading. The gauge will display the tire pressure in PSI.
- Compare with Recommended Pressure: Check the tire pressure against the recommended levels found in the owner’s manual or on the driver’s side door jamb.
- Reattach Valve Cap: After checking, be sure to replace the valve cap securely.
Useful Tips for Tire Pressure Maintenance
To ensure your tires remain in optimal condition, consider the following tips:
- Check Tire Pressure Monthly: Make it a habit to check your tire pressure at least once a month and before long trips.
- Monitor Temperature Changes: Be aware that tire pressure can drop in colder temperatures. Check pressure more frequently during winter months.
- Inspect Tires Regularly: Look for signs of wear, cracks, or bulges, and ensure that tread depth is adequate.
- Use a Reliable Gauge: Invest in a good-quality tire pressure gauge for accurate readings.
- Don’t Forget the Spare: Check the pressure of your spare tire as well, as it can often be overlooked.
By following these guidelines and maintaining proper tire pressure, you can enhance the safety, performance, and longevity of your 2017 Hyundai Veloster.
0 Comments