The 2017 Hyundai Tucson is a compact SUV that combines style, comfort, and performance. One of the key aspects of vehicle maintenance is ensuring that the tire pressure is at the recommended levels. Proper tire pressure not only enhances fuel efficiency but also ensures optimal handling and safety on the road. Understanding the correct tire pressure for your specific trim and engine type is essential for maintaining your vehicle’s performance.

Maintaining the correct tire pressure is crucial for the longevity of your tires and the overall safety of your vehicle. Under-inflated tires can lead to increased wear and tear, reduced fuel efficiency, and compromised handling. Conversely, over-inflated tires can cause a harsh ride and increased risk of tire blowouts. Below is a detailed table showing the recommended tire pressure for different trims and engine types of the 2017 Hyundai Tucson.

2017 Hyundai Tucson Tire Pressure

Tire Pressure Specifications

Trim/Engine Front Tire Pressure (PSI) Front Tire Pressure (BAR) Rear Tire Pressure (PSI) Rear Tire Pressure (BAR)
SE (2.0L) 32 2.2 32 2.2
SEL (2.0L) 32 2.2 32 2.2
Sport (2.4L) 33 2.3 33 2.3
Limited (2.4L) 33 2.3 33 2.3
Eco (1.6L Turbo) 32 2.2 32 2.2

2017 Hyundai Tucson Tire Pressure Sensor Reset

The tire pressure monitoring system (TPMS) in the 2017 Hyundai Tucson is designed to alert you when tire pressure is too low. However, after inflating the tires to the correct pressure, you may need to reset the system. This process can also be necessary if the TPMS light is flashing, indicating a malfunction or that the system needs recalibration. Below are steps to reset the tire pressure sensor effectively.

Steps to Reset the Tire Pressure Sensor


  1. Ensure all tires are inflated to the recommended pressure.

  2. Turn the ignition to the “ON” position without starting the engine.

  3. Locate the TPMS reset button, usually found beneath the steering wheel or in the glove compartment.

  4. Press and hold the reset button until the TPMS light blinks three times.

  5. Release the button and turn off the ignition.

  6. Start the engine and check if the TPMS light is off.

Tire Pressure Monitoring System Light Flashing

If the TPMS light continues to flash after resetting, it may indicate a more serious issue. Here are potential causes:

Issue Possible Solution
Low Tire Pressure Check and inflate tires to the recommended pressure.
Faulty TPMS Sensor Inspect and replace the faulty sensor as needed.
Battery Issue in Sensor Replace the battery in the TPMS sensor if applicable.
System Malfunction Consult a professional mechanic for diagnosis and repair.

Regular Maintenance

To avoid issues with the TPMS and ensure accurate readings, consider the following maintenance tips:


  • Check tire pressure monthly.

  • Rotate tires regularly to promote even wear.

  • Inspect tires for damage or wear.

  • Replace TPMS sensors as recommended by the manufacturer.

Importance of Maintaining Proper Tire Pressure

Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. Under-inflated tires can lead to a variety of issues, including increased tire wear, reduced fuel efficiency, and compromised handling. On the other hand, over-inflated tires can result in a harsh ride and an increased risk of blowouts. Regularly checking and maintaining the correct tire pressure can enhance your driving experience and prolong the life of your tires.

Proper tire pressure affects not only safety but also fuel economy. When tires are inflated to the recommended levels, rolling resistance is minimized, leading to better fuel efficiency. This is especially important for a compact SUV like the 2017 Hyundai Tucson, where every mile per gallon counts. Furthermore, maintaining the right pressure ensures that your vehicle handles as intended, providing better traction and stability on the road.

How to Check Tire Pressure

Checking tire pressure is a straightforward process that can be done at home or at a gas station. Here’s how to do it:


  1. Purchase a reliable tire pressure gauge if you don’t already have one.

  2. Ensure tires are cold; wait at least three hours after driving.

  3. Remove the valve cap from one tire.

  4. Press the gauge onto the valve stem and take the reading.

  5. Compare the reading with the recommended tire pressure (found on the driver’s side door jamb).

  6. Repeat for all tires, including the spare if applicable.

Useful Tips for Tire Pressure Maintenance

To ensure that your tires remain in optimal condition, consider the following tips:


  • Check tire pressure at least once a month and before long trips.

  • Inspect tires for signs of wear or damage, such as cracks or bulges.

  • Rotate your tires regularly to promote even wear.

  • Keep a portable air compressor in your vehicle for emergencies.

  • Be aware of seasonal changes; tire pressure can drop in colder weather.

  • Consult your owner’s manual for specific tire maintenance recommendations.

By following these guidelines, you can maintain the proper tire pressure in your 2017 Hyundai Tucson, ensuring a safer and more efficient driving experience.

Categories: Hyundai

0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *