The 2017 Harley Davidson Ultra Limited is a premium touring motorcycle known for its comfort and performance. Proper tire pressure is crucial for ensuring optimal handling, safety, and fuel efficiency. Riders must understand the recommended tire pressures for their specific trim and engine type to maintain peak performance and avoid potential issues.
2017 Harley Davidson Ultra Limited Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Ultra Limited | 36 | 2.5 | 40 | 2.8 |
| Ultra Limited Low | 36 | 2.5 | 40 | 2.8 |
| Ultra Limited with 114 Engine | 36 | 2.5 | 40 | 2.8 |
| Ultra Limited with 107 Engine | 36 | 2.5 | 40 | 2.8 |
2017 Harley Davidson Ultra Limited Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) on the 2017 Harley Davidson Ultra Limited is designed to alert riders when tire pressure is outside the recommended range. A flashing tire pressure monitoring system light can indicate that the system needs to be reset, often after adjusting tire pressures or replacing a tire. Understanding how to reset the TPMS is essential for maintaining accurate tire pressure readings.
Steps to Reset Tire Pressure Sensor
- Ensure all tires are inflated to the recommended pressure.
- Turn the ignition key to the “On” position without starting the engine.
- Locate the TPMS reset button, usually found near the fuse box or under the seat.
- Press and hold the reset button until the TPMS light blinks three times, then release it.
- Start the engine and check if the TPMS light remains off.
Tire Pressure Monitoring System Light Flashing
A flashing TPMS light typically indicates a malfunction in the system. This can occur due to various reasons, including:
| Possible Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may be under-inflated. |
| Faulty Sensor | The sensor may be damaged or malfunctioning. |
| Battery Failure | The battery in the tire pressure sensor may need replacement. |
| System Malfunction | There may be an issue with the TPMS itself. |
What to Do When the Light is Flashing
- Check tire pressures and inflate as necessary.
- Inspect tires for visible damage or punctures.
- Visit a Harley Davidson service center if the issue persists.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is critical for the performance and safety of the 2017 Harley Davidson Ultra Limited. Incorrect tire pressure can lead to various issues, including reduced handling, increased tire wear, and compromised safety. Under-inflated tires can cause excessive heat buildup, leading to blowouts, while over-inflated tires may result in a harsh ride and decreased traction.
Benefits of Proper Tire Pressure
- Improved Handling: Properly inflated tires enhance the motorcycle’s handling and stability, especially during turns and braking.
- Increased Fuel Efficiency: Correct tire pressure can improve fuel economy by reducing rolling resistance.
- Extended Tire Life: Maintaining the right pressure helps prevent uneven tire wear, prolonging the lifespan of your tires.
- Enhanced Safety: Proper tire pressure reduces the risk of tire blowouts and improves overall riding safety.
How to Check Tire Pressure
Regularly checking tire pressure is essential for optimal performance. Here’s how to do it:
- Gather Tools: You will need a reliable tire pressure gauge.
- Check When Cold: Measure tire pressure when the tires are cold, ideally before riding or at least three hours after riding.
- Remove Valve Cap: Unscrew the valve cap on the tire you wish to check.
- Press Gauge: Firmly press the tire pressure gauge onto the valve stem to get a reading.
- Read Pressure: Note the PSI reading on the gauge and compare it to the recommended pressure.
- Adjust as Necessary: Inflate or deflate the tire to reach the recommended pressure.
- Replace Valve Cap: Screw the valve cap back on securely.
Useful Tips for Maintaining Tire Pressure
- Check Regularly: Make it a habit to check tire pressure at least once a month.
- Use Quality Equipment: Invest in a good quality tire pressure gauge for accurate readings.
- Monitor Weather Changes: Temperature fluctuations can affect tire pressure; check more frequently during seasonal changes.
- Inspect for Damage: Regularly inspect tires for any signs of wear, punctures, or damage.
- Follow Manufacturer Guidelines: Always adhere to the recommended tire pressures outlined in the owner’s manual.
0 Comments