Proper tire pressure is crucial for the performance and safety of any motorcycle, including the 2017 Harley-Davidson Road Glide. Maintaining the correct tire pressure ensures optimal handling, fuel efficiency, and tire longevity. Riders should regularly check their tire pressure to avoid issues such as poor traction, increased tire wear, and compromised safety.
For the 2017 Harley-Davidson Road Glide, tire pressure specifications vary based on different trim levels and engine types. Understanding these specifications helps riders maintain their motorcycle in prime condition. Below is a detailed table of recommended tire pressures for various trims and engines.
2017 Harley Davidson Road Glide Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Road Glide Ultra | 36 | 2.5 | 40 | 2.8 |
| Road Glide Special | 36 | 2.5 | 40 | 2.8 |
| Road Glide (Standard) | 36 | 2.5 | 40 | 2.8 |
Resetting the Tire Pressure Sensor on 2017 Harley Davidson Road Glide
The tire pressure monitoring system (TPMS) is an essential feature in modern motorcycles, including the 2017 Harley-Davidson Road Glide. When the TPMS light flashes or remains illuminated, it indicates that the tire pressure sensors need to be reset. This may occur after tire inflation, rotation, or replacement. Knowing how to reset the tire pressure sensor is crucial for maintaining accurate tire pressure readings.
Steps to Reset the Tire Pressure Sensor
- Ensure that all tires are inflated to the recommended pressure.
- Turn the ignition key to the “ON” position without starting the engine.
- Locate the TPMS reset button, usually found under the dash or near the steering column.
- Press and hold the reset button until the TPMS light blinks three times, then release it.
- Start the engine and allow it to run for about 20 minutes to complete the reset process.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after following the reset procedure, it may indicate a malfunction in the system. Below are common causes and troubleshooting steps.
| Issue | Description | Solution |
|---|---|---|
| Low Tire Pressure | One or more tires are below the recommended pressure. | Check and inflate tires to the specified PSI. |
| Faulty Sensor | The TPMS sensor may be damaged or malfunctioning. | Inspect sensors and replace if necessary. |
| Battery Issues | The battery in the TPMS sensor may be depleted. | Replace the sensor battery or the entire sensor. |
Regular Monitoring
Maintaining proper tire pressure is vital for safety and performance. Regularly check the tire pressure and ensure the TPMS is functioning correctly. If issues persist, consult a professional mechanic for further diagnostics.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is essential for the safety, performance, and longevity of your motorcycle. For the 2017 Harley-Davidson Road Glide, correct tire pressure directly impacts handling, fuel efficiency, and tire wear. Riding with incorrect tire pressure can lead to various issues, including poor traction, increased stopping distances, and a higher risk of tire blowouts.
Benefits of Proper Tire Pressure
- Improved Handling: Correct tire pressure ensures optimal contact with the road, enhancing stability and maneuverability.
- Increased Fuel Efficiency: Properly inflated tires reduce rolling resistance, which can lead to better fuel economy.
- Extended Tire Life: Maintaining the right pressure helps prevent uneven tire wear, extending the lifespan of your tires.
- Enhanced Safety: Proper tire pressure reduces the risk of blowouts and improves braking performance, ensuring a safer ride.
How to Check Tire Pressure
Regularly checking your tire pressure is a simple yet crucial task. Here’s how to do it:
- Gather Tools: You will need a reliable tire pressure gauge and an air compressor.
- Check When Cold: Tire pressure should be checked when the tires are cold, ideally before riding.
- Remove Valve Stem Cap: Unscrew the cap from the tire’s valve stem and keep it in a safe place.
- Press the Gauge: Firmly press the tire pressure gauge onto the valve stem to get a reading.
- Record the Pressure: Note the PSI reading and compare it to the recommended pressure specified in your owner’s manual.
- Adjust as Necessary: If the pressure is too low, add air using the compressor. If it’s too high, release some air until it reaches the correct level.
- Replace Valve Cap: Once done, securely replace the valve stem cap.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain in optimal condition, consider the following tips:
- Check Regularly: Make tire pressure checks a routine part of your maintenance schedule, ideally every couple of weeks.
- Inspect for Damage: Regularly inspect tires for cuts, punctures, or signs of wear that may affect pressure.
- Use a Quality Gauge: Invest in a good-quality tire pressure gauge for accurate readings.
- Monitor Temperature: Be aware that tire pressure can fluctuate with temperature changes; check pressure after significant temperature shifts.
- Consider a TPMS: If not already equipped, consider installing a tire pressure monitoring system for real-time updates.
By prioritizing tire pressure maintenance, riders can enjoy a safer, more efficient, and enjoyable riding experience on their 2017 Harley-Davidson Road Glide.
0 Comments