The 2017 Ford Transit is a versatile and reliable vehicle designed for various commercial and personal uses. Proper tire maintenance is crucial for performance, safety, and fuel efficiency. One of the key aspects of tire maintenance is ensuring that the tire pressure is within the recommended range for the specific trim or engine type.
Maintaining the correct tire pressure not only enhances the vehicle’s handling and stability but also prolongs tire life. Different trims and engine configurations of the 2017 Ford Transit may have varying tire pressure requirements. Below is a detailed table outlining the recommended tire pressure for each trim and engine type.
2017 Ford Transit Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Transit 150 | 60 | 4.14 | 60 | 4.14 |
| Transit 250 | 65 | 4.48 | 65 | 4.48 |
| Transit 350 | 65 | 4.48 | 70 | 4.83 |
| Transit 350 HD | 65 | 4.48 | 75 | 5.17 |
2017 Ford Transit Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) is an essential feature in the 2017 Ford Transit that helps ensure your tires are properly inflated. If the TPMS light starts flashing or remains illuminated, it indicates a potential issue with tire pressure or the system itself. Resetting the tire pressure sensor is a straightforward process that can resolve these warnings and ensure your vehicle operates safely.
Steps to Reset the Tire Pressure Sensor
- Check Tire Pressure: Before resetting the sensor, ensure all tires are inflated to the recommended pressure levels as specified in the owner’s manual.
- Turn on the Ignition: Insert the key into the ignition and turn it to the “On” position without starting the engine.
- Locate the Reset Button: The reset button is usually found beneath the steering wheel or on the dashboard. Refer to the owner’s manual for the exact location.
- Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it. This indicates that the system has been reset.
- Start the Engine: Turn the ignition off and then start the engine. The TPMS light should turn off after a few moments if the reset was successful.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after following the reset procedure, it may indicate a malfunction within the system. Here are some common causes and troubleshooting steps:
| Issue | Possible Cause | Solution |
|---|---|---|
| Flashing TPMS Light | Low Tire Pressure | Check and inflate tires to the recommended pressure. |
| Flashing TPMS Light | Faulty Tire Pressure Sensor | Inspect and replace the sensor if necessary. |
| Flashing TPMS Light | Damaged Wiring | Check wiring connections for damage or corrosion. |
| Flashing TPMS Light | Battery Issue | Replace the battery in the tire pressure sensor. |
Regular Maintenance Tips
To prevent issues with the TPMS and ensure optimal performance, consider the following maintenance tips:
- Regularly check tire pressure, especially before long trips.
- Inspect tires for wear and damage.
- Rotate tires as recommended by the manufacturer.
- Replace tire pressure sensors as needed, typically every 5-7 years.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the performance, safety, and longevity of your 2017 Ford Transit. Under-inflated or over-inflated tires can lead to various issues, including reduced fuel efficiency, impaired handling, and increased tire wear. Proper tire pressure ensures that your vehicle maintains optimal contact with the road, enhancing traction and stability.
Driving with incorrect tire pressure can also pose serious safety risks. Under-inflated tires are more prone to blowouts, while over-inflated tires can lead to a harsh ride and decreased grip. Regular monitoring of tire pressure not only promotes safety but also contributes to better fuel economy, as properly inflated tires reduce rolling resistance.
How to Check Tire Pressure
Checking the tire pressure of your Ford Transit is a straightforward process that can be done with a few simple steps:
- Gather Tools: You will need a reliable tire pressure gauge. Digital gauges are often more accurate and easier to read than analog ones.
- Check When Cold: Tire pressure should be checked when the tires are cold, ideally before driving. This ensures you get an accurate reading.
- Remove Valve Cap: Unscrew the valve cap from the tire you want to check.
- Press Gauge: Press the tire pressure gauge onto the valve stem firmly. You should hear a brief hissing sound as air escapes, which is normal.
- Read the Pressure: Check the gauge reading. Compare it to the recommended pressure listed on the driver’s side door jamb or in the owner’s manual.
- Adjust as Necessary: If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air until it’s correct.
- Replace Valve Cap: Don’t forget to screw the valve cap back on to prevent dirt and moisture from entering the valve.
Useful Tips for Tire Pressure Maintenance
To keep your tires in optimal condition, consider the following tips:
- Check Tire Pressure Monthly: Regular checks ensure you catch any issues early. Consider checking before long trips.
- Inspect Tires for Damage: Look for cuts, punctures, or bulges that may affect tire pressure.
- Use a Quality Gauge: Invest in a good tire pressure gauge for accurate readings.
- Monitor Seasonal Changes: Temperature fluctuations can affect tire pressure. Tires generally lose about 1 PSI for every 10°F drop in temperature.
- Keep a Repair Kit Handy: Having a tire repair kit can help address minor punctures before they become serious problems.
By following these practices, you can ensure that your 2017 Ford Transit operates safely and efficiently. Proper tire maintenance will not only enhance your driving experience but also extend the life of your tires.
0 Comments